Power & UPS
Sub categories
Showing Results for Power & UPS
-
Code Blue
SKU: 40395
Code Blue 40395 Harness A700 Plug Strip
- Drop-in replacement for Code Blue A700 series paging amplifiers; no modification needed.
- Supports 12–24V DC operation, maintaining compatibility across varied power configurations.
- Molded connector design ensures secure, repeatable mating during maintenance or reconfiguration.
$100.00 $99.99 Save $0.01 -
Code Blue
SKU: 41144
Code Blue 41144 PoE Power Splitter Unit
802.3af PoE splitter with IP68 weatherproofing for multi-camera setups
- Distributes 802.3af power across standard PoE security camera systems
- IP68-rated weatherproof design for indoor and outdoor deployments
- Rack-mount form factor with 850nm infrared support integration
$250.00 $214.99 Save $35.01 -
Code Blue
SKU: 41163
Code Blue 41163 Transformer 40VA 100-277V CB2a
- 40VA output powers multi-door card readers and relay modules from a single supply.
- 100–277V AC input handles 120V and 240V branch circuits without jumpers or rewiring.
- Built-in serial interface integrates directly with CB2a panels via Wiegand or RS-485.
$270.00 $233.99 Save $36.01 -
Code Blue
SKU: 41246
Code Blue 41246 Transformer 40VA 120V-24V
- Converts 120V AC to stable 24V AC output at 40VA for multi-device low-voltage loads.
- Built-in thermal protection prevents transformer runaway under short-circuit or overcurrent.
- Screw-down lug terminals on primary and secondary integrate with existing panel wiring.
$150.00 $149.99 Save $0.01 -
Code Blue
SKU: 41247
Code Blue 41247 Transformer 40VA 120V-24V
- Steps 120V AC down to 24V AC at 40VA — powers up to eight 5W security devices.
- Isolated secondary winding eliminates noise coupling on analog and digital control runs.
- Screw terminals accept 14–10 AWG wire, fitting standard control boxes and DIN enclosures.
$250.00 $216.99 Save $33.01 -
Code Blue
SKU: 41421
Code Blue 41421 IP Surge Suppressor
- MOV + gas discharge topology clamps 6kV+ transients before they reach PoE endpoints.
- Supports 802.3af/at/bt PoE pass-through with no voltage drop or signal degradation.
- Inline RJ45 Cat5e/Cat6 form factor installs into existing runs without recabling.
$180.00 $155.99 Save $24.01 -
Code Blue
SKU: 41465
Code Blue 41465 IA4100/IP5000 Battery 3-Pack
- Three-battery kit reduces service calls by enabling scheduled preventive swap-out cycles.
- Drop-in replacement for both IA4100 and IP5000 platforms simplifies multi-model parts inventory.
- OEM-matched specs maintain voltage stability and runtime during AC mains loss events.
$280.00 $242.99 Save $37.01 -
Code Blue
SKU: 41471
Code Blue 41471 Surge Protector Analog
- Suppresses lightning and switching transients to protect analog camera circuits.
- Parallel wiring configuration adds no series impedance to the protected power feed.
- Compact form factor mounts inside control panels without requiring dedicated rack space.
$94.00 $81.99 Save $12.01 -
Code Blue
SKU: 41472
Code Blue 41472 Surge Protector Analog - 3 Pack
- Passive analog design activates instantly on voltage transient—no firmware or batteries needed.
- 3-pack covers multiple 12V DC camera feeds, alarm panels, or PoE injector outputs per order.
- Compact form fits DIN rail, junction boxes, and racks with no enclosure modifications required.
$250.00 $216.99 Save $33.01 -
Code Blue
SKU: 41485
Code Blue 41485 Replacement Battery Kit 3pk
- 3-pack format reduces return trips when servicing multiple Code Blue devices.
- Direct replacement batteries maintain uninterrupted operation in deployed Code Blue accessories.
- Multi-pack supply simplifies inventory management for integrators running large installations.
$190.00 $189.99 Save $0.01 -
Code Blue
SKU: 41537
Code Blue 41537 55Ahr Sealed Lead-Acid Battery
- 55Ahr SLA capacity supports 4–8 hours of backup on 7–15W access-control loads.
- Hermetically sealed, maintenance-free chemistry; installs in any orientation safely.
- 5.0 lb gross weight fits vertical or horizontal in standard UPS and power cabinets.
$430.00 $372.99 Save $57.01 -
Code Blue
SKU: 41574
Code Blue 41574 PoE Power Assembly
IP68 PoE assembly for outdoor security cameras and network devices
- 802.3af PoE standard powers IP cameras without separate electrical runs
- IP68 enclosure rating withstands harsh indoor and outdoor conditions
- Compact form factor fits cable runs and junction boxes for flexible placement
$250.00 $216.99 Save $33.01 -
Code Blue
SKU: 41599
Code Blue 41599 Outdoor 24V AC to 12V DC PoE Converter
24V AC to 12V DC converter with IP68 outdoor rating for thermal cameras
- Converts 24V AC input to 12V DC output for thermal camera systems
- IP68-rated enclosure withstands dust and water in outdoor installations
- PoE (802.3af) support integrates with standard security infrastructure
$83.00 $71.99 Save $11.01 -
Code Blue
SKU: 41643
Code Blue 41643 Solar Power Update V5 to Solis
- Accepts 12–24V DC input, bridging legacy solar charge controllers without extra hardware.
- Firmware bridge preserves existing sensor wiring while enabling Solis remote management.
- Supports off-grid deployments by integrating with existing battery banks and charge controllers.
$3,070.00 $2,632.99 Save $437.01 -
Code Blue
SKU: 45006
Code Blue 45006 NightCharge Kit CB1 10 Amp
- Delivers 10 A capacity to sustain reliable power across Code Blue emergency units.
- Hardwired Ethernet connection maintains persistent data paths in critical deployments.
- Kit format streamlines installation into existing Code Blue security infrastructure.
$1,860.00 $1,595.99 Save $264.01 -
Code Blue
SKU: CB1E00455
Code Blue CB1E00455 CB1e SYL BLEm Power Supply
- Direct OEM replacement preserves CB1e Sylence BLEm amplifier system integrity.
- Accepts 120V AC input and delivers 12–24V DC output for compatible amplifiers.
- Drop-in fit eliminates reconfiguration during system transitions or repairs.
$5,800.00 $5,021.99 Save $778.01
Power is the foundation of every surveillance, access-control, and network system. Centralized, supervised, battery-backed power keeps cameras recording, doors locking, and switches forwarding during outages and surge events. Choose components sized for your load — recorder UPS, camera supplies, PoE midspans, surge protection — and your system runs through the events that take down unmanaged installations.
Plan a Reliable Power System
- Sized power supplies — 12V or 24V DC sized to total device load plus 25% headroom for spin-up, aging, and expansion.
- UPS & battery backup — runtime sized to your outage profile, with managed shutdown for NVRs and access controllers.
- PoE budgets — 802.3af, at, and bt midspans/switches sized for total port load, not just per-port maximum.
- Surge protection & grounding — at the building entrance and at outdoor camera locations exposed to lightning.
- Distribution & redundancy — rack PDUs, DIN-rail supplies for industrial cabinets, and dual-source feeds for life-safety loads.
Shop by Category
Featured Brands
Buyer FAQ
Need help sizing your system?
Our team includes working integrators who size camera-system power, PoE budgets, and access-control supplies daily. Send your bill of materials, recorder count, and target runtime — we'll recommend the right UPS, supply, and midspans before you order.





