Lenovo · 4X20E54691

Lenovo 4X20E54691 Thinkserver 800 W Gold HOT Swap Redundant Power Supply for Tower

N 800W Gold-rated, hot-swappable redundant power supply designed to maintain continuous operation for compatible Lenovo tower servers

Lenovo · 4X20F28577

Lenovo 4X20F28577 Thinkserver GEN 5 1100W Platinum HOT Swap Power Supply

1100-watt Platinum-rated hot-swappable power supply unit designed to provide reliable and efficient power for Lenovo ThinkServer Gen 5 systems

Lenovo · 4X20F28578

Lenovo 4X20F28578 Thinkserver GEN 5 1600W Platinum HOT Swap Power Supply

1600W 80 Plus Platinum-rated hot-swap power supply designed as a direct replacement or redundancy expansion unit for Lenovo ThinkServer Gen 5 servers

Lenovo · 4X20G87845

Lenovo 4X20G87845 Thinkserver GEN 5 450W Gold HOT Swap Power Supply

450W 80 PLUS Gold certified hot-swappable power supply unit designed to provide reliable and efficient power for ThinkServer Gen 5 server systems

Lenovo · 4X20G87846

Lenovo 4X20G87846 Thinkserver 450W HOT Swap Redundant Power Supply

450W hot-swap redundant power supply module designed to maintain continuous operation for the ThinkServer TS460

Lenovo · 4Z57A80508

Lenovo SR250/SR150 Front VGA Connector KIT V2 - 4Z57A80508

Front VGA Connector KIT V2 designed to provide essential video output for system management on specific Lenovo ThinkSystem servers

Lifesafety Power · ACCESSORY-CABLE-12-SET-OF-2

Lifesafety Power Accessory-Cable-12-Set-Of-2 Accessory-Cable-12"

Two-pack of 12-inch power cables engineered for surveillance and access control installations where short-run wiring is required

• 12-inch length eliminates cable slack and reduces clutter in compact cabinet installs.
• Two-pack format provides a spare on hand, cutting reorder cycles across multi-site deployments.
• Rated for 24 VDC, matching Lifesafety Power supply outputs for direct, compatible interconnects.

Lifesafety Power · B100-BOXED

Lifesafety Power B100-BOXED Voltage Power Supply 12VDC

Compact, field-configurable power supply engineered for IP security installations where voltage flexibility and current capacity matter

• Selectable 12VDC fixed or 5–18VDC adjustable output reduces need for multiple supply units.
• 4-amp capacity supports two to four mid-power IP cameras or mixed access control loads.
• Boxed enclosure suits surface or DIN-rail mount in panels, closets, or remote distribution nodes.

Lifesafety Power · B150-BOXED

Lifesafety Power B150-Boxed Quick Guide B150

Compact battery backup enclosure that solves a critical deployment problem: keeping your access control panels, security systems, and edge-mounted

• Delivers 4–8 hours of AC-fail backup at 12VDC/75W for access control and PoE loads.
• Weatherproof compact enclosure supports outdoor junction boxes and electrical closets.
• DIN-rail and wall-mount options reduce commissioning labor and simplify future maintenance.

Lifesafety Power · BS1-BOXED

Lifesafety Power BS1-BOXED LSP BS1-Boxed Single Battery Shelf Bra

Single battery shelf bracket designed to mount and organize backup battery units within UPS enclosures and power distribution cabinets

• Dedicated single-battery shelf isolates terminals from vibration, reducing connection wear.
• Standard 19-inch rack form factor integrates with modular security and UPS cabinets.
• Organized cable routing reduces terminal strain and speeds up battery replacement cycles.

Lifesafety Power · BT500-16R

Lifesafety Power BT500-16R Rack Mount PoE Midspan Injector 500W

1U rack-mount PoE injector designed to distribute centralized power to networked security cameras and IoT devices across distributed deployments

• Eight ports at up to 90W each support thermal cameras and high-draw PTZ units.
• 500W total PoE budget in a 1U rack footprint keeps high-density deployments organized.
• Universal AC 110–240V dual inputs provide redundant power for critical installations.

Lifesafety Power · BT500-8R

Lifesafety Power BT500-8R BT Poe Midspan Injector 500W Universal

N 8-port PoE midspan injector designed for retrofitting high-power devices into existing data-only network runs without replacing core infrastructure

• 8 PoE ports at up to 90W each retrofit high-draw devices onto existing switches.
• 500W total capacity powers PTZ cameras, access control, and WAPs from one 1U unit.
• Onboard 48V battery charger maintains PoE delivery to critical ports on AC mains loss.

Lifesafety Power · BX50-D8E1

Lifesafety Power BX50-D8E1 8 DC auxiliary outputs fused at 3A per

Unified power supply combining FlexPower modules and access control hardware in one UL-listed enclosure

• 8 DC outputs each fused at 3A enable independent zone-level fault isolation.
• Automatic fire alarm disconnect unlocks doors instantly on alarm signal receipt.
• 120/230VAC dual-input accepts global supply voltages; 50W total output capacity.

Lifesafety Power · BX75-BOXED

Lifesafety Power BX75-BOXED LSP Product Boxed Single Voltage PoE

Single voltage PoE power supply engineered for mid-to-large IP security camera and access control deployments where consolidated power distribution

• 75W enclosed PoE supply consolidates power distribution for mid-to-large IP camera arrays.
• 24VDC regulated output with IEEE 802.3af/at compliance supports standard edge devices without adapters.
• DIN-rail or wall-mount enclosure fits electrical closets and equipment racks near AC mains feed.

Lifesafety Power · BX75-C4E1

Lifesafety Power BX75-C4E1 PoE 75W power supply 12V and 24V 4 re

75-watt power supply designed to power networked access control systems and IP endpoints in integrated security deployments

• 75W PoE power supply with dual 12V/24V outputs
• 4 supervised relay outputs at 3A each
• Powers access control endpoints from PoE infrastructure

Lifesafety Power · C4-BOXED

Lifesafety Power C4-BOXED Lock output module 4 outputs fused

Compact four-channel output module designed to distribute supervised 12VDC power to access control hardware from a centralized logic platform

• Four independent 3A fused outputs prevent a single lock fault from disrupting other circuits.
• Supports mixed failsafe and fail-secure modes per output within the same installation.
• FAI-rated for fire alarm interface compatibility, meeting code requirements in life-safety deployments.

Lifesafety Power · C4P-BOXED

Lifesafety Power C4P-Boxed Flexpower C4/C4P C8/C8P

4-output lock control expansion module designed to add access control capacity to existing Lifesafety Power FlexPower supply systems

• Adds 4 independently programmable lock outputs to existing FlexPower systems.
• Each output configurable for 12V or 24V, supporting mixed-voltage lock deployments.
• Per-output fail-safe or fail-secure mode simplifies fire code and egress compliance.

Lifesafety Power · C8-BOXED

Lifesafety Power C8-BOXED Relay Based Lock Control Module 4 Outpu

Relay-based access control output module designed to switch power to electronic locks, magnetic locks, and door strikes on distributed door control

• 8 isolated relay outputs switch locks at independent doors without signal bleed-through.
• Dry contact inputs accept 5–24VDC logic from any access panel—no active driver required.
• 3–5A @ 24VDC contact rating handles mag-lock inrush and fail-safe strikes reliably.

Lifesafety Power · DUAL-BUSS-HARNESS-6FT-BOXED

Lifesafety Power Dual-Buss-Harness-6FT-Boxed Dual-Buss-Harness-6F

6-foot dual-bus power harness cable assembly engineered for supervised power distribution from Lifesafety Power supplies to multiple downstream loads

• 6-foot factory-terminated harness eliminates field crimping and reduces installation time.
• Dual-bus configuration enables load balancing across two independent power distribution lanes.
• Boxed packaging protects pre-terminated connectors for immediate deployment on arrival.

Lifesafety Power · E1-BOXED

Lifesafety Power E1-BOXED LifeSafety Power E Series Standard Powe

Compact standard power enclosure from the Lifesafety Power E Series line, designed to deliver reliable DC power distribution in security and access

• Compact enclosure form factor suits cabinet, wall, or rack-mount deployments.
• Delivers isolated, supervised DC power feeds to multiple devices in one unit.
• Verify input voltage, output capacity, and circuit config before finalizing BOM.

Lifesafety Power · E12M-BOXED

Lifesafety Power E12M-BOXED MCLASS multi-purpose enclos E12M-BOXE

Multi-purpose power and access control enclosure engineered for modular access system installations

• 750W dual-voltage distribution supports up to 24-door access control deployments.
• Removable backplate enables full bench pre-wiring before on-site installation.
• 14-gauge welded steel with powder coat finish resists mechanical stress and corrosion.

Lifesafety Power · E1M-BOXED

Lifesafety Power E1M-BOXED LABEL Unified Power Sol.Mercury 14.5

Unified power solution from the Lifesafety Power Mercury lineup, designed to simplify power provisioning in compact security installations

• Factory-assembled, tested-ready boxed unit eliminates custom panel fabrication labor.
• 14.5 x 5.5 in. form factor fits tight equipment racks and wall-mounted panels.
• Optimized for Lifesafety Power Mercury E1 and E2 series architectures.

Lifesafety Power · E2-BOXED

Lifesafety Power E2-BOXED Enclosure E2 20x16x4.5 black no bac

Wall-mounted steel enclosure designed for power distribution, supervision, and control electronics in commercial security and access-control systems

• 20"W × 16"H × 4.5"D steel enclosure fits retrofit and space-constrained installs.
• Black powder-coated cold-rolled steel resists corrosion in standard indoor environments.
• Accepts E2-series power supplies, relay cards, and supervision modules in one enclosure.

Lifesafety Power · E2M-BOXED

Lifesafety Power E2M-BOXED MCLASS Power Enclosure FLEXPOWER E2M

UL294-listed multi-purpose power enclosure engineered to consolidate access control hardware, FlexPower management boards, and battery backup into a

• UL294-listed enclosure supports compliance on regulated access control installations.
• Removable backplate enables shop-level pre-wiring, cutting field labor by 30–40%.
• 4.5" depth integrates battery backup internally—no external extensions required.

Lifesafety Power · E2M1-BOXED

Lifesafety Power E2M1-BOXED Enclosure E2M1 20x16x4.5 black

Compact field-mount steel enclosure designed for distributed power and control electronics in surveillance and access-control deployments

• Pre-installed 35mm DIN-rail backplate accepts power supplies, breakers, and relays without drilling.
• 20×16×4.5-inch black powder-coated steel body fits pole, wall, or overhead mounts in tight spaces.
• Hinged latched door allows fast component access without unmounting the enclosure from the wall.

Lifesafety Power · E2M1-DOOR-ONLY

Lifesafety Power E2M1-DOOR-ONLY QUICK GUIDE Mercury Backplat

250W 24V DC power supply purpose-built for access control and door-locking systems in mid-scale deployments

• 250W 24V DC supply handles 8–16 mag locks or electric strikes on a single unit.
• 24 relay outputs with per-output fail-secure/fail-safe selection eliminate external relay modules.
• E12 enclosure (48H×36W×8D) mounts directly in 19-inch racks without custom fabrication.

Lifesafety Power · E4-2BS1

Lifesafety Power E4-2BS1 E4 Battery Enclosure

Modular battery backup enclosure designed to extend runtime on Lifesafety Power E4-series uninterruptible power supplies

• Mounts directly to E4-series UPS units—no external cabling or adapters needed.
• Stackable enclosures let you scale runtime capacity as site power demands grow.
• Fits standard 19-inch racks, keeping surveillance and access-control installs compact.

Lifesafety Power · E4M-BOXED

Lifesafety Power E4M-Boxed Flexpower E4M / E4M1 / E4M2 / E4M3

UL294-listed multi-purpose enclosure engineered to integrate Lifesafety Power FlexPower power management boards with Mercury Security access control

• UL294-listed enclosure reduces compliance review cycles at system inspection.
• Removable backplate enables shop pre-wiring before transport, cutting field time.
• 6.5-inch depth houses battery backup alongside power boards—no extra cabinet needed.

Lifesafety Power · E4M1-BOXED

Lifesafety Power E4M1-Boxed E4 Enclosure 20W X 24H X 45D Black

Painted steel access control enclosure designed for small-to-medium door control clusters, mounting up to 5 Mercury or LNL boards with integrated

• Integrated 20W supply supports up to 5 Mercury/LNL boards without auxiliary power.
• Compact 20W×24H×4.5D steel enclosure mounts flush to walls in tight entry points.
• Pre-wired tamper switch signals your panel alarm input on unexpected door breach.

Lifesafety Power · E4M1-DOOR-ONLY

Lifesafety Power E4M1-DOOR-ONLY DOOR ONLY E4M1 enclosure door

Replacement door assembly designed for the E4M1 backup power enclosure, securing access to internal power distribution and battery backup components

• Direct OEM fit for E4M1 enclosures; no shimming, adapter plates, or modification required.
• Factory-installed latch hardware keeps battery and power distribution components secured.
• Installs with hand tools only, minimizing downtime during field door replacement.

Lifesafety Power · E8B1-BOXED

Lifesafety Power E8B1-BOXED Enclosure E8B1 36x30x6.5 black

Black powder-coated steel enclosure designed to house and protect access control electronics in Brivo backplate and door-mount configurations

• 36×30×6.5 in. shallow depth supports both recessed and surface-mount installation.
• Engineered for Brivo backplate and door-mount controller configurations.
• Black powder-coated steel resists corrosion across indoor commercial deployments.

Lifesafety Power · E8M-BOXED

Lifesafety Power E8M-BOXED MCLASS multi-purpose Enclosure E8M-BOX

Modular access-control enclosure designed for integrators who need to combine power management and access-panel hardware in a single

• Supports up to 12 doors across 12V and 24V rails in a single enclosure.
• Removable backplate enables shop-side pre-wiring, cutting on-site assembly time.
• 16-gauge steel with 6.5" depth fits 12Ah battery packs internally; no external mount.

Lifesafety Power · E8M1-BOXED

Lifesafety Power E8M1-BOXED MCLASS Multi-purpose Enclosures

Modular power and access control enclosure designed to integrate FlexPower power management boards with Mercury Security access control panels in a

• Houses FlexPower and Mercury Security panels in one cabinet, cutting equipment overhead.
• Removable backplates allow shop-side board mounting before transport, reducing field rework.
• Dual voltage distribution supports up to 12–16 doors without secondary power supplies.

Lifesafety Power · E8M2-BOXED

Lifesafety Power E8M2-BOXED 16 Door Mercury Security 36"H X 30"W

Wall-mounted power distribution enclosure designed to centralize and protect 16 access control door circuits in commercial security installations

• 16 isolated door outputs prevent a single fault from taking down adjacent circuits.
• Accepts 120V AC input directly, eliminating step-down transformers in most facilities.
• Wall-mount 36"H×30"W enclosure suits retrofit installs where floor space is constrained.

Lifesafety Power · E8M3-BOXED

Lifesafety Power E8M3-BOXED Enclosure E8M3 36x30x6.5 black

Wall-mounted metal enclosure designed for power distribution, battery backup, and control logic in surveillance and access control installations

• 36×30×6.5 in. shallow cabinet fits wiring closets where full racks won't.
• Included Mercury backplate eliminates custom fab for DIN rail and breaker layout.
• Black powder-coat finish controls corrosion and dust in indoor control rooms.

Lifesafety Power · FPG100-BOXED

Lifesafety Power FPG100-BOXED Power Supply 100-240VAC internat

Dual-voltage power supply accepting 100–240VAC input, with selectable 12VDC (8A) or 24VDC (4A) output

• Accepts 100–240VAC input — no step-down transformer needed for global deployments.
• Selectable 12VDC/8A or 24VDC/4A output covers most access control and lock loads.
• Single enclosed supply supports multi-region sites including North America, Europe, and Japan.