ATEN 0AD8-0605-24M1 AC Power Adapter
Overview
The ATEN 0AD8-0605-24M1 is a 12.7W AC-to-DC power adapter delivering a regulated 5.3V at 2.4A — a non-negotiable replacement or spare for ATEN KVM switches, extenders, and AV distribution units that require this specific output rail. If you are deploying or servicing an ATEN device that ships without a power supply, or you need a verified replacement to avoid a voltage mismatch that can damage the connected unit, this is the part to source. It accepts universal AC input (100–240V), so it works across US and international rack environments without a step-down converter.
Compatibility
The 0AD8-0605-24M1 is specified for use with the following ATEN product families:
- KVM switches: CS1784 (4-port DVI KVM), CS74, CS1716 (16-port PS/2-USB KVM)
- Remote access: CN8000 (1-local/1-remote KVM over IP)
- KVM extenders: CE 370, CE 680, CE 690, CE 750, CE 60X series
- AV distribution: VE300, VE812, VS1508
Verify your unit's DC input spec before ordering — the 5.3V/2.4A output is specific to these families. Substituting a 5V or 5.1V adapter from a different product line risks under-voltage faults; substituting a higher-current adapter without matching voltage is equally problematic. Use this exact part for the listed models.
Installation Notes
Input accepts AC 100–240V, making it compatible with standard US outlets and international power without modification. Total power draw is 12.7W at full load — negligible on any standard circuit. No additional hardware or wiring is required beyond plugging the barrel connector into the device's DC input port.
