Posiflex CR6310B-8023 Printer-Driven Cash Drawer
Overview
The Posiflex CR6310B-8023 is a printer-triggered cash drawer (Key # 8023) built for retail point-of-sale environments where automated transaction-based drawer operation eliminates manual handling. It connects directly to compatible Posiflex CR-6000 series receipt printers via USB interface, opening automatically when a sale completes — a standard workflow in hospitality and quick-service retail.
Physical footprint: 16.8" wide × 17.9" deep × 4.3" tall, weighing 19.8 lbs. The drawer sits as a compact hardware accessory requiring no separate power supply; it draws power directly from the printer (12 VAC @ 1 A input, supporting solenoid operation at 0.75A @ 12 VDC or 1.5 A @ 24 VDC).
Compatibility
The CR6310B-8023 is designed for the Posiflex CR6300 Series (models CR6310B and CR6316B) and integrates with thermal and receipt printers in the CR-6000 line that support Key # 8023 driver configuration. Verify your printer model includes drawer-trigger capability in firmware or driver settings before purchase — some systems may require a firmware update to enable automatic open-on-sale functionality.
Connection uses a standard RJ-12 connector wired directly to the printer's dedicated drawer port. No intermediate relay or external controller is needed. Installation requires the printer's native WEPOS or UPOS drivers to trigger the solenoid at transaction completion.
Installation Notes
Position the drawer within 3 feet of the printer's drawer-port connector. The solenoid operates at 100–250 millisecond pulse duration with a 10% duty cycle, meaning rapid successive transactions won't cause thermal stress. All metal construction uses reinforced heavy-gauge steel with embedded powder-coat finish; patented "screwless" tamper-resistant design includes a three-position mechanical lock and fixed compartments (five bill slots, six coin compartments, four coin-roll storage slots, plus rear cash tray and non-cash media slot). MTBF rated at one million open/close operations.
Test trigger functionality in your POS software after installation to confirm reliable drawer opening at transaction completion.
