Middle Atlantic Plgmd SGL Crct 12IN. OC 6 - NM24GB612

Middle Atlantic NM24GB612 Non-Metallic Plugmold Multi-Outlet Strip

Overview

The Middle Atlantic NM24GB612 is a 6-foot non-metallic Plugmold multi-outlet strip designed for structured rack and raceway installations where you need distributed AC receptacles at predictable intervals. At 12-inch outlet spacing across a 6-foot (1.8 m) run, this strip gives integrators consistent, evenly spaced power taps — exactly what you want when laying out a security equipment rack or access control enclosure where cable management and device spacing are planned in advance.

TAA compliance makes the NM24GB612 suitable for federal, state, and municipal government projects subject to the Trade Agreements Act, a requirement that disqualifies a large share of generic power strips from consideration on public-sector bids.

Key Features

• 6 ft (1.8 m) Overall Length: Spans a standard 19-inch rack bay with room to route to adjacent equipment — long enough for a mid-density panel without excess slack bunching behind the cabinet.
• 12-Inch Receptacle Spacing: Outlets land every 12 inches (30.5 cm), so a standard wall-wart or block-style power adapter at one outlet won't physically crowd or block the adjacent one. This is the spec that matters most in dense AV and security racks where adapters are the norm, not the exception.
• GB Device Configuration: The GB configuration specifies the outlet style — confirm this matches your receptacle standard before ordering, particularly in retrofit projects where the existing panel infrastructure may constrain which outlet format is acceptable.
• TAA Compliant: Meets Trade Agreements Act requirements, clearing the compliance gate for GSA Schedule orders, government integrator contracts, and any project with a Buy American or TAA sourcing clause. This is a hard requirement on federal and many state government bids — a non-TAA strip simply won't pass procurement review regardless of price.
• Non-Metallic Construction: The NM-series housing avoids the grounding and galvanic corrosion considerations that come with metallic raceway in mixed-metal enclosures. Lighter weight also simplifies overhead or wall-mount installations where load ratings are a factor.
• Plugmold Platform: Plugmold is a widely deployed multi-outlet raceway system used across commercial AV, security, and structured cabling installations. Specifying within the Plugmold line means parts, extensions, and compatible accessories are straightforward to source through established channels without custom fabrication.

Integration & Compatibility

The NM24GB612 is designed for surface-mount or raceway deployment alongside the broader Middle Atlantic power and raceway line. It is suited for use in rack power distribution applications where consistent outlet positioning simplifies cable routing. When planning a multi-device enclosure, pair this strip with a rack management accessory to keep AC and low-voltage runs separated. For structured security installations, review your security system power planning guide to confirm load requirements against the strip's circuit rating before finalizing the layout.

Frequently Asked Questions

Q: Is the NM24GB612 TAA compliant?

A: Yes. The NM24GB612 is TAA compliant, making it eligible for GSA Schedule orders and government projects requiring Trade Agreements Act sourcing.

Q: What is the outlet spacing on the NM24GB612?

A: Receptacles are spaced 12 inches (30.5 cm) apart across the full 6-foot length of the strip.

Q: What does the GB device configuration mean?

A: GB designates the outlet style/configuration for this strip. Verify this matches your required receptacle format before ordering, especially in retrofit or government-spec projects.

Q: Can the NM24GB612 be used in a standard equipment rack?

A: The NM24GB612 is designed for raceway and rack-adjacent surface-mount installations. Confirm your specific rack model's mounting compatibility and load rating before installation.

Q: Is the NM24GB612 the same as a metallic Plugmold strip?

A: No. The NM24GB612 uses a non-metallic housing, which avoids grounding and galvanic corrosion issues that can arise with metallic raceway in mixed-metal enclosures.

Marty Allison

The detail I always check first on a Plugmold strip is receptacle spacing, and the NM24GB612's 12-inch interval is the right call for security and AV enclosures dominated by wall-wart and block-style power adapters — you're not going to lose an outlet to a wide adapter body at 12 inches the way you would at 6-inch spacing.

Technical Highlights:

• 12-in Receptacle Spacing: At 30.5 cm center-to-center, full-size power adapters sit at adjacent outlets without mechanical interference — a practical win in dense access control or intercom panels.
• 6 ft (1.8 m) Length: Covers a standard rack bay with enough reach for equipment at cabinet extremities; no extension required for typical single-bay layouts.
• TAA Compliance: Hard procurement requirement on federal and most state government contracts — skipping this verification is the fastest way to have a power strip rejected at the submittal stage.

Deployment Considerations:

• The GB device configuration is specific — confirm outlet style compatibility with your panel and any existing receptacle infrastructure before finalizing the order, particularly on retrofit jobs.
• Non-metallic housing simplifies installation in mixed-metal enclosures but does not substitute for metallic raceway where conduit-continuity grounding is specified by the AHJ — check the local code requirement.

The NM24GB612 is a practical fit for government facility security integrations — access control panels, video intercom racks, and alarm enclosures on GSA or municipal contracts where TAA sourcing is a non-negotiable line item on the submittal checklist.