Middle Atlantic Plgmd 6FT.SGL CRT 18IN.OC - G20GB618

Middle Atlantic G20GB618 Aluminum Plugmold Multi-Outlet Strip

Overview

The Middle Atlantic G20GB618 is a 6 ft (1.8 m) aluminum plugmold multi-outlet strip designed for structured rack environments, AV infrastructure, and security system installations where consistent receptacle placement and federal procurement compliance matter. The 18-inch outlet spacing gives you predictable access points along the full strip length — no crowding power bricks or fighting for room between adjacent outlets. If you're outfitting a rack room, a communications closet, or a security equipment bay that feeds into a government or federally funded project, the TAA-compliant designation on the G20GB618 means it clears the procurement gate without a waiver.

Key Features

• 6 ft (1.8 m) Run Length: Covers a full standard rack bay or a single-wall equipment segment without splicing. The 1.8 m length maps cleanly to 42U or 45U open-frame racks where floor-to-ceiling power distribution is the goal.
• 18-Inch (45.7 cm) Receptacle Spacing: Wide outlet spacing prevents power adapter conflicts — each outlet has room to seat a standard or slightly oversized plug without blocking its neighbor. This spacing is particularly useful in NVR bays and security appliance rows where bulky AC adapters are common.
• TAA Compliant: Qualifies for GSA Schedule purchases, federal agency installations, and government-contracted security integrations. If your project has a Section 889 or Buy American compliance checklist, TAA compliance on the G20GB618 clears one line item without additional documentation.
• Gray Finish: Neutral gray blends with standard rack and raceway finishes — consistent aesthetics in open-frame racks, enclosed cabinets, and wall-mounted equipment panels without special finishing.

Integration & Compatibility

The G20GB618 is part of Middle Atlantic's plugmold and raceway line, designed to integrate with their aluminum raceway systems and open-frame rack infrastructure. It is well-suited for deployment alongside rack power distribution in security head-end rooms, NVR closets, and access control equipment bays. For installations requiring surge protection or metered PDU functionality, pair with a compatible rack PDU upstream. Consult your raceway and cord management plan when routing the strip along a wall or rack vertical — the 6 ft run may require supplemental clip or bracket support depending on the mounting surface.

Frequently Asked Questions

Q: Is the Middle Atlantic G20GB618 TAA compliant?

A: Yes. The G20GB618 is TAA compliant, making it eligible for GSA Schedule purchases and federally funded installations requiring Trade Agreements Act compliance.

Q: What is the receptacle spacing on the G20GB618?

A: Outlets are spaced 18 inches (45.7 cm) apart along the 6 ft strip length, which helps prevent power adapter conflicts in dense equipment installations.

Q: What color is the G20GB618?

A: The G20GB618 is gray, which blends with standard rack and raceway finishes in commercial and government installations.

Q: What is the total length of the G20GB618?

A: The strip measures 6 ft (1.8 m) in total length.

Karl Wilson

The G20GB618's 18-inch receptacle spacing is the spec I tell integrators to pay attention to first — in a security head-end rack with NVR power bricks and access control panel supplies all competing for outlets, that extra clearance between receptacles is what keeps you from daisy-chaining cube taps or losing a plug to a blocked neighbor. At 6 ft, this strip covers a standard rack bay in a single run without extension cords.

Technical Highlights:

• 18-in (45.7 cm) Outlet Spacing: Enough room between receptacles to seat bulky AC adapters side by side without one blocking the next — a real-world benefit in NVR and access control equipment bays.
• 6 ft (1.8 m) Length: Matches a standard 42U–45U rack bay length, eliminating the need for spliced or extended runs in single-rack security installations.
• TAA Compliant: Clears federal and GSA procurement requirements for the G20GB618 without a waiver — relevant if you're on a government security contract or working with a federally funded facility.

Deployment Considerations:

• Verify your mounting surface supports the full 6 ft run without mid-span sag — depending on installation orientation, supplemental clip or bracket support from the Middle Atlantic raceway line may be needed.
• Evidence does not specify amperage, number of receptacles, or surge protection — confirm these details against the manufacturer datasheet before specifying in high-draw environments.

The G20GB618 is a practical fit for government-contracted security integrations and federally funded facility upgrades where TAA compliance is a hard requirement and outlet spacing in equipment bays is a real installation constraint.