Middle Atlantic Plgmd 3FT.SGL CRT 6IN.OC - WH20GB306

Middle Atlantic WH20GB306 Plugmold Multioutlet Strip

Overview

The Middle Atlantic WH20GB306 is a 3 ft (0.9 m) white aluminum plugmold multioutlet strip designed for structured rack and raceway installations where consistent, evenly spaced outlet access matters. At 6 in (15.2 cm) between receptacles, it keeps power distribution tidy in AV equipment bays, security head-end closets, and low-voltage control enclosures. TAA compliance makes it a straightforward pick for government and federally funded projects where domestic sourcing requirements apply. Browse the full Middle Atlantic catalog for compatible raceway and rack power solutions.

Key Features

• 3 ft (0.9 m) Length: Sized for half-rack or sub-rack runs — long enough to serve a standard equipment bay without requiring daisy-chaining, short enough to fit neatly inside a rack power channel without excess overhang.
• 6 in (15.2 cm) Receptacle Spacing: Even spacing at 6 in intervals prevents plug crowding that leads to bent connectors or accidental disconnects — a common failure point in dense head-end installations where multiple brick-style power supplies compete for adjacent outlets.
• White Finish: Matches standard white raceway and surface-mount enclosures common in retail, healthcare, and light commercial deployments where visible conduit runs need to blend with the environment rather than stand out.
• TAA Compliant: Meets Trade Agreements Act sourcing requirements, clearing the WH20GB306 for use on GSA schedules, federal contracts, and state/local government projects with domestic-content mandates — no compliance review required before spec-in.

Integration & Compatibility

The WH20GB306 is part of Middle Atlantic's Plugmold aluminum multioutlet strip line and is designed to integrate with wire management and raceway systems where consistent outlet positioning is required. Its white aluminum housing seats cleanly into surface-mount raceways or mounts directly to a wall or backboard in low-voltage enclosures. For projects requiring longer runs or different receptacle spacing, check the broader rack accessories category for alternate Plugmold lengths and configurations within the same family. Confirm outlet count and amperage requirements with your panel load calculation before specifying — those values are not published in available evidence for this SKU and should be verified against the manufacturer datasheet.

Frequently Asked Questions

Q: Is the Middle Atlantic WH20GB306 TAA compliant?

A: Yes. The WH20GB306 is confirmed TAA (Trade Agreements Act) compliant, making it eligible for use on federal, GSA, and government-contract projects with domestic sourcing requirements.

Q: What is the receptacle spacing on the WH20GB306?

A: Receptacle spacing is 6 inches (15.2 cm) center-to-center.

Q: How long is the WH20GB306 plugmold strip?

A: The strip is 3 feet (0.9 meters) in length.

Q: What color is the WH20GB306?

A: White.

Q: What outlet count and amperage rating does the WH20GB306 support?

A: Outlet count and amperage are not published in available specification evidence for this SKU. Verify these values directly against the manufacturer datasheet before committing to a panel or circuit design.

Marty Allison

The spec that matters most on the WH20GB306 for a structured install is the 6-inch receptacle spacing — that's the difference between a clean power run where every brick adapter fits without forcing and a tangled outlet strip where plugs block each other and you're pulling half the rack to swap a device.

Technical Highlights:

• 6 in Receptacle Spacing: 15.2 cm center-to-center gives standard IEC and NEMA plug bodies room to seat fully without adjacent plug interference — relevant whenever you're powering multiple PoE injectors, small UPS units, or compact switching supplies side by side.
• 3 ft Run Length: At 0.9 m, the WH20GB306 covers a standard 6U–8U vertical equipment bay cleanly; for taller runs, plan a second strip or step up to a longer Plugmold variant rather than daisy-chaining.
• TAA Compliance: Confirmed compliant — clears the sourcing gate for federal integrators without requiring a separate compliance review or substitution mid-project.

Deployment Considerations:

• Verify outlet count and circuit amperage against your load calculation before ordering — those specs are not listed in available evidence and must be confirmed from the manufacturer datasheet prior to panel sizing.
• White finish matches standard white raceway but will stand out against gray or black enclosures — specify the correct color variant if aesthetics matter in a visible installation.

The WH20GB306 fits best in light commercial and government head-end closets — specifically wall-mount or surface-raceway runs where TAA compliance is a contract requirement and 6-inch spacing keeps a row of compact power supplies from fighting each other for outlet real estate.