Pelco products
-
Pelco
SKU: OHEPS25
Pelco OHEPS25 230Vac to 24Vac Power Supply
230Vac to 24Vac power supply for European outdoor housing accessories
- 400 mA output rated for single heater or wiper motor loads
- Converts European 230 Vac input to regulated 24 Vac output
- NDAA Section 889 compliant for regulated installations
$50.16 $49.99 Save $0.17 -
Pelco
SKU: OHEPS19B
Pelco OHEPS19B 12Vdc Power Supply
12Vdc regulated supply for Pelco OHE camera housings, 100–240V input
- Universal 100–240 Vac input, 50/60 Hz — no selector switch needed
- Stable 12 Vdc output designed for OHE-series housing compatibility
- Compact design rated for dry, ventilated indoor and protected locations
$49.36 $48.99 Save $0.37 -
Pelco
SKU: IJTFV-PA
Pelco IJTFV-PA Pendant Adapter for Sarix Value Cameras
Surface-mount to pendant converter for Pelco Sarix Value cameras
- Converts IJV, ITV, IFV dome and turret cameras to pendant pipe mount
- Supports conduit drop arm installations in high-ceiling environments
- NDAA Section 889 compliant for government and regulated deployments
$46.77 $45.99 Save $0.78 -
Pelco
SKU: SRXV2-LMT-1001
Pelco SRXV2-LMT-1001 L-Mount Bracket
90-degree L-bracket for Sarix Value 2 corner and corridor mounting
- OEM L-mount bracket with 90-degree offset for perpendicular wall aim
- NDAA Section 889 and TAA compliant for government procurement eligibility
- Compatible with Pelco Sarix Value 2 (SRXV2) camera systems
$47.25 $46.99 Save $0.26 -
Pelco
SKU: OHOVPS1B
Pelco OHOVPS1B Housing Power Supply 12Vdc
Universal 12Vdc supply for Pelco OHO camera housings, 100–240V input
- 100–240 Vac input with no selector switch for global deployments
- 12 Vdc output purpose-built for Pelco OHO-series housings
- NDAA Section 889 compliant for government and critical infrastructure
$44.82 $43.99 Save $0.83 -
Pelco
SKU: MRCA
Pelco MRCA 1.5 NPT Ceiling Flange Pendant Mount
1.5" NPT ceiling flange pendant mount, IP66 rated for Pelco systems
- 1.5" NPT thread size fits standard commercial conduit without adapters
- IP66 rating handles direct rain spray and dust in covered outdoor areas
- Flush ceiling mount integrates with Pelco PTZ and camera housing systems
$44.52 $43.99 Save $0.53 -
Pelco
SKU: WCPA
Pelco WCPA Wall Bracket Adapter Plate
Adapter plate resolves Pelco camera-to-bracket mounting mismatches
- Precision metal construction eliminates field fabrication and maintains load integrity
- Works across Pelco camera systems and bracket families for flexible installations
- NDAA Section 889 compliant for government and regulated facility deployments
$40.55 $39.99 Save $0.56 -
Pelco
SKU: IMV-PA
Pelco IMV-PA Pendant Mount Adapter for Sarix Value Minidomes
Pendant mount adapter converts Sarix Value minidomes for drop-rod installation
- PoE++ pass-through powers camera on pendant arm or conduit drop
- Converts surface-mount minidomes to pendant configuration for high-ceiling spaces
- NDAA Section 889 compliant, IK10 vandal-rated housing in white finish
$41.07 $40.99 Save $0.08 -
Pelco
SKU: OCTEX1/2-3/4P
Pelco OCTEX1/2-3/4P Conduit Gland Reduction NPT
3/4 to 1/2 NPT reduction for ATEX/IECEx hazardous area cable glands
- Reduces 3/4 NPT conduit entry to 1/2 NPT for mismatched thread sizes
- ATEX/IECEx certified metal fitting for classified hazardous location compliance
- NDAA Section 889 compliant for federal procurement in industrial environments
$43.50 $42.99 Save $0.51 -
Pelco
SKU: WBOVA2
Pelco WBOVA2 Wall Bracket Internal Cable Channel Gray
Gray wall mount bracket with internal cable routing for Pelco WBOV cameras
- Internal cable channel routes power and network cabling through bracket body
- Gray powder-coated steel construction rated IP66 with optional gasket kit
- Wall-mount design integrates with Pelco WBOV series camera systems
In stock · Ships same business day$38.55 $37.99 Save $0.56 -
Pelco
SKU: BRKTMD-1011
Pelco BRKTMD-1011 L-Bracket Modular Microbullet
Right-angle L-bracket for Pelco modular microbullet corner and wall mounting
- Purpose-built for Pelco modular microbullet sensor heads only
- Perpendicular mounting geometry for corridor and confined-space surveillance
- NDAA Section 889 compliant for government and regulated installations
$39.72 $38.99 Save $0.73 -
Pelco
SKU: SWM-PA-GY
Pelco SWM-PA-GY Pole Mount Adapter Gray
Pole mount adapter converts Pelco SWM-GY wall systems to pole installations
- Direct conversion from wall to pole mount without separate bracketing needed
- Gray finish matches Pelco hardware for consistent outdoor surveillance aesthetics
- NDAA Section 889 and TAA compliant for government and infrastructure deployments
$37.84 $36.99 Save $0.85 -
Pelco
SKU: OCTEX1/2C
Pelco OCTEX1/2C ATEX IECEx Conduit Gland
1/2 NPT conduit gland with ATEX/IECEx certification for hazardous areas
- ATEX and IECEx certified to maintain explosion-proof ratings at cable entry
- 1/2 NPT thread entry for standard hazardous location conduit connections
- Integrates with Pelco camera systems in classified industrial environments
$39.75 $38.99 Save $0.76 -
Pelco
SKU: OHOVPS2B
Pelco OHOVPS2B Power Supply 230V to 24V AC
230V to 24V AC converter for Pelco OHO surveillance housings
- Converts European 230 Vac mains to regulated 24 Vac output
- Compact mount-ready design fits OHO-series camera housings
- NDAA Section 889 compliant for government surveillance projects
$35.48 $34.99 Save $0.49 -
Pelco
SKU: OHEPS20
Pelco OHEPS20 Housing Power Supply 230Vac to 24Vac
230Vac to 24Vac converter for Pelco outdoor camera housings
- Powers heater, blower, and wiper motor systems simultaneously
- 20% operational headroom matched to integrated housing accessories
- Indoor/enclosed installation in dry, ventilated location required
$35.48 $34.99 Save $0.49 -
Pelco
SKU: VB-400-VF-MAG
Pelco VB-400-VF-MAG Magnetic Camera Mount
Magnetic close-fit mount for Pelco VB-400-VF fisheye camera
- Tool-free installation on ferrous metal surfaces, no drilling required
- Temporary, mobile, or semi-permanent deployment for rapid repositioning
- NDAA Section 889 compliant for government and regulated applications
$35.00 $34.99 Save $0.01 -
Pelco
SKU: IJTV-AP
Pelco IJTV-AP Adapter Plate for IJV ITV Sarix Cameras
OEM adapter plate for Pelco IJV, ITV, and Sarix Value cameras
- Standardized mounting interface unifies three camera series in one deployment
- NDAA Section 889 compliant for government and regulated facility installations
- Reduces inventory complexity across mixed Pelco camera system rollouts
$34.23 $33.99 Save $0.24 -
Pelco
SKU: WBJQ2B_FLIR
Pelco WBJQ2B_FLIR WBJ Wall Mount FLIR Custom Color
Surface-mount wall bracket for Pelco thermal and dual-sensor cameras
- Vertical surface-mount design fits Pelco outdoor housings with WBJ interface
- FLIR custom color finish matches thermal camera equipment across mixed fleets
- Outdoor-rated construction for government, infrastructure, and enterprise deployments
$35.00 $24.99 Save $10.01 -
Pelco
SKU: IMV-AP
Pelco IMV-AP Adapter Plate for Sarix Minidome
Adapter plate for Sarix minidome varifocal lens upgrades
- Precision-engineered mounting for IMV Series varifocal lenses
- IK09 vandal rating compatible with Sarix Value minidome systems
- Maintains optical alignment for consistent image sharpness across zoom
$31.94 $30.99 Save $0.95 -
Pelco
SKU: BRKTMD-1031
Pelco BRKTMD-1031 Trimring Bracket Microbullet
Trimring bracket for Pelco microbullet sensor heads with field-serviceable design
- Mounts Pelco microbullet sensor heads to ceiling and wall surfaces with finished appearance
- Field-serviceable without removing sensor head, reducing installation and maintenance downtime
- Metal construction, NDAA Section 889 compliant for government and critical infrastructure projects
$32.13 $31.99 Save $0.14







