ATEN PE6108B 8-Outlet 1U Rack Power Distribution Unit
The ATEN PE6108B is a 1U rack-mount power distribution unit delivering eight IEC 320 C13 outlets across a 100–240V input range — a straightforward fit for equipment racks in server rooms, AV closets, and security head-end enclosures where you need reliable multi-outlet distribution without a large footprint. The PE6108B ships with a 3-meter power cord, giving you enough reach in most standard 42U or 45U rack configurations without an extension.
Key Features
- Eight IEC 320 C13 Outlets: C13 is the universal connector for 1U servers, NVRs, network switches, and most rack-mounted security appliances — no adapter juggling when populating a mixed-vendor rack.
- 100–240V Universal Input: Operates on both North American and international mains voltage, so the same unit travels with a deployment or serves international facilities without a transformer.
- 1U Rack Form Factor: A single rack unit keeps your power distribution from eating space you need for cameras, recorders, or networking gear — relevant in tight 6U or 9U wall-mount enclosures.
- 3-Meter Power Cord: The 3m cord provides practical reach from a floor PDU or wall outlet to the rack, reducing the need for extension cords that can create cable-management headaches.
- UL Safety Verification: UL listing confirms the unit has passed independent electrical safety testing — a requirement for many commercial building and data center environments. Additional certifications available on request per the manufacturer's documentation.
- PMonitor Software Support: Compatible with ATEN's PMonitor utility on both Windows (v1.0.081) and Linux (v1.1), allowing power monitoring and management from a workstation — useful for facilities teams tracking load across a rack.
- Active Firmware: Firmware v2.5.248 (released April 2026) confirms the product line is actively maintained — relevant if your organization requires current firmware for security or compliance audits.
Integration and Compatibility
The PE6108B supports ATEN's PMonitor software on Windows and Linux, enabling basic power visibility from a management station. The unit is part of the broader ATEN power management line, and integrates naturally into rack PDU deployments alongside ATEN's IP-based remote power management products. For environments that require per-outlet switching or remote reboot capability, review ATEN's managed PDU variants in the same family before committing to the PE6108B. If you are planning a NVR or server rack build, pair this unit with a UPS upstream to protect connected equipment from power events — the PE6108B itself provides distribution, not conditioning or battery backup.
Frequently Asked Questions
Q: What outlet type does the PE6108B use?
A: The PE6108B provides eight IEC 320 C13 outlets, which are the standard female connector found on most 1U servers, NVRs, switches, and rack-mount appliances.
Q: What is the input voltage range for the PE6108B?
A: The PE6108B accepts 100–240V AC input, making it compatible with both North American and international power infrastructure.
Q: How long is the power cord included with the PE6108B?
A: The included power cord is 3 meters (approximately 9.8 feet).
Q: Is the PE6108B UL listed?
A: Yes, the PE6108B carries UL safety verification. Additional certifications are available on request per ATEN's documentation.
Q: Does the PE6108B support remote management or monitoring software?
A: The PE6108B is compatible with ATEN's PMonitor software for Windows (v1.0.081) and Linux (v1.1), enabling power monitoring from a connected workstation.
Q: Does the PE6108B provide per-outlet switching or remote reboot capability?
A: Based on available specifications, the PE6108B is a metered/monitored PDU — per-outlet switching is not confirmed in the evidence. If remote outlet control is required, verify with ATEN's managed PDU variants in the same product family before purchasing.
The PE6108B earns its place in a rack build primarily because of the 100–240V universal input range paired with eight C13 outlets in a single rack unit — that combination covers the vast majority of rack-mount security and IT equipment without any voltage conversion overhead. It is a practical distribution layer, not a management platform.
Technical Highlights:
- Universal 100–240V Input: One SKU serves North American 120V and international 230V environments — eliminates the need to stock separate PDU variants for multi-site deployments.
- PMonitor Software (Windows + Linux): Dual-OS support (Windows v1.0.081, Linux v1.1) means your facilities or IT team can monitor load from whichever workstation OS is standard in the operation center.
- Firmware v2.5.248 (April 2026): Active firmware maintenance confirms ATEN still supports this product line — a non-trivial point for organizations that require patched, current firmware as part of their infrastructure compliance posture.
Deployment Considerations:
- The 3m cord is sufficient for most rack-to-floor-outlet runs, but measure your specific rack bay depth and PDU entry point before assuming it reaches — particularly in deep 1000mm or 1100mm rack enclosures.
- The PE6108B does not provide power conditioning or battery backup on its own; install it downstream of a UPS if connected equipment (NVRs, network switches, access control servers) requires ride-through during power events.
This unit is well-matched to a security head-end rack — 8-camera NVR, PoE switch, access control server, and a workstation — where you need clean distribution across mixed C13 loads and basic software-side load visibility without the cost of a fully managed switched PDU.
