Panduit PR2VSD08 Vertical Dual-Sided Cable Manager, 45RU, 8 In. Wide
Overview
The Panduit PR2VSD08 is a 45RU, 8-inch-wide vertical dual-sided cable manager from the Panduit PatchRunner™ 2 line — purpose-built for high-density data centers and structured cabling environments where horizontal and vertical cable routing must coexist without sacrificing airflow, access, or floor space. At 83.88 inches tall and 8 inches wide, this manager is designed to run full-height alongside a standard 45RU open frame rack or enclosed cabinet, keeping patch runs organized on both sides of the vertical channel in a single unit. The pre-assembled construction means it arrives ready to mount — no sub-assembly required on the data center floor, which matters when you're commissioning multiple bays under a tight maintenance window.
The dual-sided design uses a metal backbone for structural rigidity, with molded plastic fingers that guide cables into organized bundles without sharp edges that can damage jacket insulation over time. A single full-length metal door with dual-hinging and push-to-close mechanism covers the entire 45RU channel — you get fast one-handed access during moves, adds, and changes, while the closed position keeps the front-of-rack appearance clean and cables protected from accidental snagging. The black finish is standard for modern data center environments.
Key Features
- 45RU Full-Height Channel: At 83.88 in. (2,130.4 mm) tall, the PR2VSD08 spans a full 45RU rack from top to bottom — no mid-rack breaks in cable routing, which eliminates the bundling transitions that cause strain and kinking in shorter managers.
- 8-Inch Channel Width: The 8 in. (203.2 mm) wide channel handles high cable counts typical of ultra-high-density patch environments — 10G copper, fiber, and bulk copper runs can co-exist in the same vertical path without over-packing the space.
- Dual-Sided Access: Cables route on both the front and rear sides of the manager, so front-of-rack patch cords and rear-of-rack horizontal runs share one vertical unit rather than requiring two separate managers — conserving rack bay real estate.
- Pre-Assembled Construction: Ships fully assembled, reducing installation time versus field-assembled alternatives. In large deployments where dozens of managers are being installed across a row, pre-assembly translates directly to fewer labor hours per bay.
- Metal Backbone with Molded Plastic Fingers: The metal backbone provides the structural support needed to hold cable bundles vertically without sagging over the life of the installation. Molded plastic fingers keep individual runs separated and accessible during MACs without disturbing adjacent cables.
- Full-Length Dual-Hinge Push-to-Close Door: One metal door covers the full 45RU channel. The dual-hinge design lets the door swing open in either direction, which matters when rack rows are closely spaced and you're working from a narrow aisle. Push-to-close eliminates the need to fiddle with latches during high-frequency access.
- RoHS Compliant: Meets RoHS directive requirements — relevant for enterprise and government deployments with environmental materials compliance obligations in procurement specifications.
- UL 2416 and CSA C22.2 Listed: Cable management products carrying UL 2416 and CSA C22.2 markings meet North American safety standards for optical fiber and copper cable management systems — a hard requirement on many commercial construction and data center projects where the AHJ (Authority Having Jurisdiction) inspects cabling infrastructure.
Integration & Compatibility
The PR2VSD08 is designed for integration alongside standard open frame racks and enclosed cabinets in structured cabling deployments. Its 45RU height aligns with standard 45RU open-frame two-post and four-post racks. The dual-sided channel accommodates both front patch cord management and rear horizontal cable routing, making it compatible with a range of rack configurations without modification. As part of the PatchRunner™ 2 family, it is designed to work alongside Panduit's broader cable management and rack system ecosystem, including horizontal managers, rack units, and patch panel accessories. The manager's 8-inch width fits standard vertical manager mounting positions on compatible Panduit rack systems.
Frequently Asked Questions
Q: What rack height is the PR2VSD08 compatible with?
A: The PR2VSD08 is 45RU tall (83.88 inches / 2,130.4 mm), designed to run alongside standard 45RU racks. Verify your rack height before ordering — it is not designed to trim down for shorter cabinets.
Q: Is the PR2VSD08 pre-assembled or does it require field assembly?
A: It ships fully pre-assembled. No field assembly of the manager itself is required, which reduces installation time in large deployments.
Q: What standards does the PR2VSD08 meet?
A: The PR2VSD08 meets RoHS compliance requirements and is listed to UL 2416 and CSA C22.2 — North American safety standards for cable management systems.
Q: How many doors does the PR2VSD08 include?
A: One full-length metal door with dual-hinge and push-to-close mechanism, spanning the full 45RU height of the manager.
Q: What is the channel width of the PR2VSD08?
A: The channel is 8 inches (203.2 mm) wide, providing capacity for high cable counts in dense patching environments.
Q: Does the PR2VSD08 manage cables on both sides?
A: Yes. It is a dual-sided manager, routing cables on both front and rear sides of the vertical channel in a single unit.
The PR2VSD08 is the model I reach for when a high-density row build needs full-height vertical management on both sides of the channel without doubling up on manager units per bay. The 83.88-inch, 45RU span and 8-inch width are the specs that matter most here — together they give you the cable capacity to handle a fully-patched 48-port patch panel stack front and rear without over-stuffing the channel or creating the mid-run bends that degrade signal integrity on longer copper runs.
Technical Highlights:
- 45RU x 8 In. Channel: Full-height coverage at 83.88 in. with an 8-inch-wide dual-sided channel handles the cable volumes a fully populated 45RU rack generates — front patch cords and rear horizontal runs in one unit rather than two separate half-height managers.
- Pre-Assembled Metal Backbone: Ships ready to mount. The metal backbone (not plastic throughout) keeps the manager rigid under loaded cable weight across the full 45RU span — critical in dense deployments where cable bundles are heavy and unsupported over long vertical runs.
- UL 2416 / CSA C22.2 Listing: North American code compliance is a hard checkpoint on commercial and government data center projects. Having the listing in the product spec eliminates a submittal back-and-forth with the AHJ — the documentation path is already established.
Deployment Considerations:
- Confirm your rack is 45RU before ordering — this manager is fixed-height at 83.88 inches and is not designed to be field-shortened for 42RU or shorter cabinets.
- The full-length door (one door, full 45RU height) is a convenience asset in low-density aisle configurations, but in very tight hot-aisle/cold-aisle rows with less than 36 inches of aisle clearance, verify the door swing direction doesn't conflict with adjacent equipment before finalizing the layout.
The PR2VSD08 is a strong fit for new colocation cage builds, enterprise data center row expansions, and any structured cabling project where the AHJ requires UL 2416 compliance documentation — it eliminates assembly labor and ships pre-compliant.
