Hubbell HC6OR01P Cat6 Plenum Patch Cord, 1 ft, Orange

Overview

The Hubbell HC6OR01P is a 1-foot Cat6 patch cord with a plenum (CMP) rated jacket in orange — a short, standards-compliant jumper built for structured cabling installations where low-smoke, low-flame-propagation jacket material is required by code. At 1 foot, it's sized for high-density patch panel fields where minimizing cable slack keeps airflow clear and cable management tight. Browse the full Hubbell structured cabling line for matching jacks, panels, and bulk cable.

Key Features

• Plenum (CMP) Jacket Rating: the HC6OR01P carries a plenum jacket rating, which satisfies NEC Article 800 requirements for cables run through air-handling spaces — drop ceilings, raised floors, and HVAC plenums. This is the jacket you need when the AHJ requires it; using a non-plenum cord in a plenum space is a code violation and a fire risk.
• Cat6 Performance: Cat6 supports Gigabit Ethernet at up to 100 meters and 10GbE at shorter distances (up to ~55m depending on cross-talk environment). For a 1-foot patch cord at a panel or switch port, you're well inside any Cat6 performance envelope — bandwidth is not the constraint here; jacket compliance is.
• Orange Color-Coding: orange jacket aids visual port identification at the patch panel face, a real operational benefit when you're tracing circuits in a dense network switch or patch panel environment. Color discipline at scale reduces mis-patching incidents significantly.
• 1-Foot Length: sized for direct panel-to-panel or panel-to-switch connections in a standard rack bay. Avoids the cable slack that accumulates with longer cords in tight structured cabling installations — keeps airflow open and cable management professional.

Integration & Compatibility

The HC6OR01P is backward-compatible with Cat5e infrastructure and forward-compatible with Cat6A patch panels and keystone jacks. It terminates in standard 8P8C (RJ-45) connectors and integrates into any 568-A or 568-B wired horizontal cabling plant. Pair with Hubbell Cat6 patch panels and keystone modules for a matched-component channel — particularly important in plenum environments where the full channel must maintain CMP compliance. Consult a cabling selection guide if you're mixing plenum and non-plenum segments to confirm code compliance at each link boundary.

Frequently Asked Questions

Q: Is the HC6OR01P suitable for use in air-handling ceiling spaces?

A: Yes. The HC6OR01P carries a plenum (CMP) jacket rating, which meets NEC requirements for cables installed in air-handling spaces such as drop ceilings and raised floors used as HVAC plenums.

Q: What Ethernet speeds does the HC6OR01P support?

A: As a Cat6 patch cord, it supports Gigabit Ethernet (1000BASE-T) at standard distances and 10GbE (10GBASE-T) at shorter channel lengths. At 1 foot, performance is not a limiting factor in any compliant Cat6 channel.

Q: Can I use the HC6OR01P with Cat5e patch panels?

A: Yes. Cat6 patch cords are backward-compatible with Cat5e panels and keystone jacks. You will operate at Cat5e channel performance if other channel components are Cat5e.

Q: Why is the jacket orange?

A: Orange is a common color-coding convention used to identify specific port groups, VLANs, or circuit types in structured cabling installations. It aids at-a-glance circuit identification at the patch panel.

Q: Is the HC6OR01P compatible with standard RJ-45 equipment?

A: Yes. The cord terminates in standard 8P8C (RJ-45) connectors compatible with any Ethernet switch, patch panel, or network device using standard RJ-45 ports.

Jerry Tildsen

The HC6OR01P is the kind of cord that only matters when you get it wrong — run a non-plenum jacket through an air-handling ceiling on a code-inspected commercial build and you're pulling it back out. The plenum (CMP) rating on this Hubbell cord is the spec that matters at the AHJ level, and at 1 foot, it's purpose-built for patch panel to patch panel or panel to switch connections inside a rack bay.

Technical Highlights:

• CMP Plenum Jacket: satisfies NEC Article 800 for air-handling space installation — the code-required jacket for any cable run through a drop ceiling or HVAC plenum on a commercial project.
• Cat6 Specification: supports Gigabit and short-run 10GbE — at 1 foot, you're never the bandwidth bottleneck; the Cat6 rating future-proofs the patch field against switch upgrades.
• Orange Color Identification: useful in high-density panels where port discipline prevents mis-patching — assign orange to a specific VLAN or circuit group and the visual convention does real operational work at scale.

Deployment Considerations:

• Verify the full channel is CMP-rated before closing the ceiling — a single non-plenum segment in a plenum path fails the code requirement regardless of what the patch cord carries.
• At 1 foot, this cord is not the right choice for switch-to-wall-port runs or any hop longer than a single rack bay — for those, spec a longer cord from the same Hubbell plenum series to maintain jacket consistency.

This cord fits best in commercial office, healthcare, or education builds where the horizontal cabling plant runs through plenum ceilings and the AHJ enforces jacket ratings — environments where a CM or CMR cord is simply not an option and every component in the channel needs to match.