Hubbell HC6GN03P Cat6 Plenum Patch Cord — 3 ft, Green

Overview

The Hubbell HC6GN03P is a 3-foot Cat6 patch cord with a plenum-rated jacket, designed for horizontal runs and equipment connections in commercial buildings where cables pass through air-handling spaces. If your project spec calls for CMP-rated cabling in ceiling plenums or raised-floor HVAC zones, this cord meets that requirement without requiring a conduit workaround. The green jacket makes it immediately identifiable in dense patch panels — useful in data closets and IDF racks where cable color-coding by function or VLAN is standard practice.

Key Features

• Cat6 Performance: Rated for Gigabit Ethernet (1000BASE-T) and supports 10GBASE-T at shorter distances — enough headroom for PoE camera feeds, access control panels, or intercom systems running on standard enterprise switches without worrying about bandwidth overhead.
• Plenum (CMP) Jacket: The plenum rating means the jacket compound meets stricter flame and smoke requirements under NFPA 70 (NEC Article 800). Use it wherever cables run through air-handling spaces — offices, hospitals, schools — without needing conduit or riser-substitution workarounds that inflate installation labor cost.
• 3-Foot Length: Short patch cords reduce cable clutter at the panel or switch face. A 3-foot run is right-sized for rack-to-rack or patch-panel-to-switch connections in a standard 2-post or 4-post equipment rack, keeping airflow clear and cable management trays from overflowing.
• Green Color Coding: Color-coded jackets let technicians identify cable segments at a glance during moves, adds, and changes (MACs). Green is commonly assigned to specific VLANs, PoE ports, or security system connections depending on your site's cabling standard — confirm your own convention before ordering in volume.

Integration & Compatibility

The HC6GN03P is compatible with standard 8P8C (RJ-45) Cat6 keystone jacks, patch panels, and switch ports. It integrates directly into Hubbell structured cabling systems but is also cross-compatible with any TIA-568-compliant Cat6 patch panel or wall jack. For PoE-powered devices — IP cameras, VoIP phones, wireless APs — a Cat6 patch cord like this one carries both data and power cleanly without the signal degradation risks associated with lower-category cables. Pair with a managed PoE switch for a complete structured cabling segment.

Frequently Asked Questions

Q: Is the HC6GN03P rated for use in air-handling plenum spaces?

A: Yes. The HC6GN03P carries a plenum (CMP) jacket rating, making it compliant for installation in ceiling plenums and raised-floor HVAC zones per NEC Article 800 without conduit.

Q: What is the exact length of the HC6GN03P?

A: The HC6GN03P is 3 feet (approximately 0.9 meters) in length.

Q: Will the HC6GN03P support PoE for IP cameras or access control devices?

A: Cat6 cabling carries PoE (802.3af/at/bt) without issue. The HC6GN03P is suitable for connecting PoE-powered devices to switch ports or patch panels in compliant structured cabling segments.

Q: Can the HC6GN03P be used with non-Hubbell patch panels?

A: Yes. It uses a standard 8P8C (RJ-45) connector and is compatible with any TIA-568-compliant Cat6 patch panel or keystone jack regardless of manufacturer.

Q: What does the green jacket color indicate?

A: The green jacket is a color-coding convention aid. The specific meaning (VLAN, port function, system type) depends on your site's cabling standard — confirm your color scheme before deploying in volume.

Eden Phillips

The HC6GN03P is a 3-foot Cat6 plenum cord — the spec that matters most here is the CMP jacket rating. In commercial construction where cables run through shared air-handling ceilings, NEC Article 800 mandates plenum-rated cable or conduit. Skipping this requirement on even one segment is a code violation that can stall a certificate of occupancy inspection.

Technical Highlights:

• CMP Plenum Rating: Meets the stricter flame-spread and smoke-density thresholds required for air-handling spaces — eliminates the need for conduit in plenum ceilings, which can reduce materials and labor cost significantly on dense installations.
• Cat6 Bandwidth: Supports Gigabit Ethernet and short-run 10GbE, providing ample throughput for PoE security cameras, IP intercoms, and access control head-ends on the same infrastructure segment.
• 3 ft / Green: Short cords keep patch panels clean — 3 feet is the right length for same-rack switch-to-panel connections, and the green jacket enables quick visual segmentation without label dependency during MACs.

Deployment Considerations:

• Confirm your site's cable color convention maps green to the intended function before ordering quantity — color codes are site-specific and not standardized across the industry.
• Plenum cords cost more per unit than CMR/riser equivalents; verify the cable pathway actually qualifies as a plenum space before specifying CMP to control project cost.

The HC6GN03P is the right call for commercial office builds, healthcare facilities, and school district deployments where plenum-space cable runs feed IP security cameras or access control panels and the AHJ enforces NEC Article 800 strictly.