Middle Atlantic Over FLR RCY Base Cover - OFRBC-8

Middle Atlantic OFRBC-8 Over-Floor Raceway Base Cover

The Middle Atlantic OFRBC-8 is an 8-foot over-floor raceway base cover designed for commercial AV, security, and IT installations where cable runs must cross open floor areas safely and cleanly. At 6.88 inches wide and just 0.63 inches in profile depth, it sits low enough to avoid a trip hazard while covering the full width of the OFR series base — the right combination for conference rooms, control rooms, lobby deployments, and open-plan offices where aesthetics and code compliance both matter. The OFRBC-8 (often searched as OFRBC 8) is TAA compliant, making it a straightforward specification for government facilities, federal contractors, and GSA-schedule projects.

Key Features

• 8 ft (2.4 m) per section: Each cover spans a full 8 feet, so a single piece handles most doorway or aisle crossings without a mid-run seam. Fewer joints mean a cleaner finished look and fewer potential snag points underfoot.
• 6.88 in (17.5 cm) width: Sized to mate with the OFR series base raceway — wide enough to route multiple low-voltage cable bundles (camera runs, network drops, access control wiring) side by side without stacking or pinching.
• 0.63 in (1.6 cm) depth profile: The low-rise cross-section minimizes the ramp effect at entry and exit points. On hard flooring — polished concrete, tile, LVT — this keeps the transition gradual enough to avoid repeated ADA flagging during inspections.
• TAA compliant: Verified TAA compliance means the OFRBC-8 satisfies Trade Agreements Act requirements for U.S. federal procurement without a waiver. Specify it directly on GSA, DHS, DoD, or other federal project BOMs.
• OFR series system fit: The OFRBC-8 is engineered specifically as the cover component for the OFR base raceway family. It clips and aligns to the base without adhesive or fasteners, allowing the cover to be removed for future cable adds or changes — a practical advantage in any installation that will evolve over time.
• Commercial-grade construction: Built to the Middle Atlantic OFR series standard for permanent commercial installations, not the lighter-duty consumer cord covers found in office supply stores. Suitable for high-foot-traffic corridors and ADA-reviewed spaces.

Integration and Compatibility

The OFRBC-8 is a cover component — it works exclusively with the Middle Atlantic OFR series over-floor raceway base. If you are planning a new floor run, pair this cover with the matching OFR base to complete the assembly. For raceway and cord cover systems, Middle Atlantic's OFR line is a widely specified choice in commercial Middle Atlantic products for AV integration and structured cabling. Installers routing low-voltage cabling for network infrastructure or security camera systems across open floor areas will find the 8-foot section length and removable cover design practical for initial installation and future maintenance. For cable management planning in larger deployments, calculate your total floor run length and divide by 8 to determine cover quantity — account for transition fittings at each end of the run.

Frequently Asked Questions

Q: Is the OFRBC-8 TAA compliant?

A: Yes. The OFRBC-8 is verified TAA (Trade Agreements Act) compliant, making it eligible for U.S. federal government procurement on GSA schedules and other federal contracts without a waiver.

Q: What is the actual length of one OFRBC-8 cover section?

A: Each OFRBC-8 section is 8 feet (2.4 meters) long. Shipping dimensions are 96 inches x 8 inches x 2 inches, consistent with a single 8-foot piece per unit.

Q: How wide is the OFRBC-8 cover?

A: The cover is 6.88 inches (17.5 cm) wide, matched to the OFR series base raceway width to provide a flush, complete closure over the cable channel.

Q: How low-profile is the OFRBC-8 — will it create a trip hazard?

A: The cover depth is 0.63 inches (1.6 cm). This low-rise profile minimizes the transition ramp at entry and exit points, reducing trip-hazard risk on hard commercial flooring. Consult your ADA compliance review for specific project requirements.

Q: Does the OFRBC-8 require adhesive or fasteners to attach?

A: The OFRBC-8 is designed as a snap-fit cover for the OFR series base raceway — no adhesive or permanent fasteners required. This allows the cover to be removed for future cable additions or changes.

Q: What raceway base does the OFRBC-8 pair with?

A: The OFRBC-8 is the cover component for the Middle Atlantic OFR series over-floor raceway base. It is not a standalone product and must be used with the compatible OFR base raceway.

Marty Allison

The OFRBC-8 is one of those components that gets overlooked in the BOM until someone trips over a poorly managed floor run on a job site. At 0.63 inches in depth and 6.88 inches wide, this cover keeps the OFR series base raceway closed and presents a low enough profile on hard commercial flooring to pass most ADA transition reviews without special accommodation.

Technical Highlights:

• 8 ft section length: A single OFRBC-8 covers most single-aisle or doorway crossings without a mid-run joint — cleaner aesthetics and one less potential snag point per crossing.
• 6.88 in width: Wide enough to house multiple low-voltage cable bundles (network, camera, access control) running in parallel without forcing a second raceway base alongside it.
• TAA compliance: Verified for the OFRBC-8 — include it on federal project BOMs without a procurement waiver. Relevant for GSA, DHS, and DoD facility cabling projects.

Deployment Considerations:

• The OFRBC-8 is only the cover — you must order the OFR series base raceway separately to complete the floor assembly. Spec both parts on your materials list or the job will stall waiting for the base.
• At 0.63 inches, the depth is low but not zero. On soft carpet or transition flooring, verify the ramp angle meets your project's ADA requirements before finalizing the run path.

Best fit for government facilities, federal contractor offices, and commercial AV control rooms where TAA compliance is a hard requirement and the floor run will be revisited as the installation evolves.