Panduit OS2 2F 2MM PC Ofnp LC Uniboot/cs Connea - F92RPU1ZNONM023

Panduit F92RPU1ZNONM023 OS2 Singlemode LC Uniboot Plenum Fiber Patch Cable

Overview

The Panduit F92RPU1ZNONM023 is a pre-terminated OS2 singlemode fiber patch cable built for structured cabling environments where code-compliant, rapid-deploy fiber runs matter. At 23 meters (75.5 ft), it covers inter-rack and cross-room spans common in fiber optic cabling deployments without field termination. The LC uniboot connector design consolidates the duplex pair into a single, compact housing — a practical advantage in high-density patch panels where standard duplex boots add significant bulk and make cable management difficult. The OFNP plenum rating means this cable can be routed through air-handling spaces without conduit, meeting fire-code requirements for open-ceiling data centers and telecommunications rooms. It ships factory-terminated and tested against Panduit's OS2 9/125µm fiber standard, so you're not relying on field polishing quality for insertion loss compliance.

Compatibility

Designed for any LC duplex-compatible port or panel: compatible with LC fiber patch panels, SFP/SFP+ transceivers using LC interfaces (prevalent in enterprise switches, storage arrays, and optical transport equipment), and passive fiber distribution frames in data centers, telecommunications rooms, entrance facilities, and equipment distribution areas. The OS2 singlemode specification (ITU-T G.652.D) is the dominant standard for single-mode plant — compatible with 1G, 10G, 40G, and 100G singlemode optics. Meets TIA-568.3-D, ISO/IEC 11801, and ITU-T G.652.D, making it suitable for both North American and international structured cabling systems. Not compatible with OM1/OM2/OM3/OM4 multimode ports — verify your optics are singlemode before ordering.

Installation Notes

The uniboot housing requires a uniboot-compatible extraction tool for removal from high-density panels — standard duplex latch tools will not engage correctly. Polarity on uniboot cables is field-reversible on many designs; confirm polarity orientation against your patch panel labeling before routing. OFNP rating is plenum-only — this cable is not rated for riser (OFNR) applications where a riser-rated jacket is specifically required by local code. Route with appropriate fiber optic management accessories to maintain minimum bend radius and avoid connector stress at termination points.