Panduit FWUYL7575LAM097 QuickNet 24-Fiber OM5 Trunk Cable Assembly
The Panduit FWUYL7575LAM097 is a 24-fiber OM5 wideband multimode trunk cable assembly engineered for high-density datacenter installations requiring extended reach and future-proof bandwidth. Spanning 97 meters (318 feet), this pre-terminated QuickNet assembly delivers plug-and-play deployment speed while supporting short-wavelength division multiplexing (SWDM) and 100G/400G Ethernet applications. LSZH jacketing meets stringent plenum safety requirements, and the lime-green color coding ensures instant OM5 identification in mixed-fiber environments. Designed for integrators managing rapid infrastructure buildouts, this trunk reduces installation labor by up to 70% compared to field-termination while guaranteeing factory-tested insertion loss and return loss performance across all 24 fibers.
Key Features
- OM5 wideband multimode fiber supports SWDM and legacy 850nm applications, future-proofing datacenter backbone investments for 100GBASE-SR4, 400GBASE-SR16, and emerging standards
- 24-fiber high-density trunk uses 30-40% less pathway space than equivalent ribbon or breakout designs, critical for congested overhead cable trays and under-floor conduit runs
- 97-meter length spans typical datacenter zones—MDA to IDA, row to end-of-row—without mid-run splice points that introduce loss and failure modes
- LSZH (Low Smoke Zero Halogen) outer jacket complies with IBC plenum requirements and international building codes, reducing toxic gas emission during fire events
- Factory-terminated connectors with insertion loss ≤0.35 dB and return loss ≥-20 dB per TIA-568-C.3, eliminating field polish variability and on-site test failures
- Lime-colored jacket provides instant visual differentiation from OM3 (aqua) and OM4 (heather violet), preventing cross-patching errors in multi-generation fiber plants
- QuickNet pre-tested assemblies ship with individual test reports documenting end-face geometry and optical performance per fiber pair, supporting TIA-606-B labeling and as-built documentation
- Pull-proof strain relief boots protect connector ferrules during installation pulls up to 110 lbf, meeting NEC Article 770 tensile load limits for communications cable
OM5 represents the latest evolution in 50µm multimode fiber technology, engineered specifically for short-wavelength division multiplexing (SWDM) protocols that transmit four distinct wavelengths (850nm, 880nm, 910nm, 940nm) simultaneously over a single fiber pair. This quadruples effective bandwidth compared to OM4 without requiring additional fiber strands—a critical advantage when pathway fill ratios already exceed 40% in established datacenters. The FWUYL7575LAM097 trunk delivers 3,500 MHz·km modal bandwidth at 953nm, ensuring sufficient margin for 400GBASE-SR4.2 links up to 150 meters and 100GBASE-SR2 (BiDi) links beyond 400 meters. For legacy equipment still operating at 850nm (10GBASE-SR, 40GBASE-SR4), the cable maintains OM4-equivalent 4,700 MHz·km bandwidth, allowing seamless integration into existing infrastructure during phased datacenter upgrades. The 50µm core diameter matches installed OM3/OM4 plants, so mode conditioning patches aren't required when connecting to older switch fabrics. TIA-492-AAAD and IEC 60793-2-10 A1a.3 specifications guarantee interoperability with all major transceiver vendors (Cisco, Juniper, Arista, Dell EMC), and the fiber meets RoHS material restrictions for European and California deployments.
Trunk cable assemblies solve the datacenter installer's central time-and-space problem: how to route dozens of fibers between racks without sacrificing an entire workday to fusion splicing or connector polishing. The FWUYL7575LAM097 ships as a single pull-ready unit with factory-installed breakout legs, fanout kits, and protective caps—no field termination required. Installation teams simply verify pull tension limits (110 lbf maximum per NEC 770.24), route the trunk through J-hooks or cable tray, and seat the connectors into patch panels or switch modules. Compared to pulling 24 individual duplex cables, the consolidated trunk reduces pathway congestion by 35%, freeing overhead space for power whips and cooling duct. The small-diameter design is especially critical in legacy datacenters retrofitting 40G/100G fabrics into cable trays originally sized for Cat6; many integrators report needing to abandon every third planned fiber run when using standard-diameter trunks, but Panduit's reduced-OD construction consistently fits within existing conduit fill ratios per NEC Chapter 9 Table 1. LSZH jacketing is non-negotiable for installations subject to NFPA 90A (plenum spaces), IBC Section 2702 (communications cables in air-handling spaces), or European CPR Class B2ca requirements. During combustion events, LSZH compounds emit 40% less smoke opacity and virtually zero hydrogen chloride compared to PVC, improving both egress visibility and post-fire equipment salvage rates. The lime jacket color follows TIA-598-D Annex A color coding for OM5, preventing the cross-connection failures that plague mixed-generation fiber plants—accidentally patching an OM5 transceiver into an OM3 link costs bandwidth margin, while reverse errors can saturate OM5 receivers designed for lower input power.
This trunk assembly meets or exceeds ISO/IEC 11801 Category OM5, TIA-568-C.3 for commercial premises fiber, TIA-604-5 (FOCIS-5) for MPO/MTP connector endface geometry, and TIA-568-C.1 general telecommunications cabling standards. Panduit's factory test process verifies insertion loss, return loss, and fiber length on every cable before shipment, and each assembly includes serialized test data for TIA-606-B administration records and SOC 2 audit trails. For datacenter operators pursuing LEED certification, the cable's RoHS compliance and halogen-free materials contribute to MR Credit 2 (construction waste management) and IEQ Credit 4.1 (low-emitting materials). The 97-meter length is purpose-built for distributed datacenter topologies: main distribution area (MDA) to intermediate distribution area (IDA) links per TIA-942 Tier III/IV architecture, spine-leaf fabric connections in Clos network designs, or storage-area-network (SAN) links between compute racks and all-flash arrays. By eliminating mid-run splice enclosures—each a potential 0.3 dB loss insertion and a MTBF weak point—this single-pull trunk simplifies troubleshooting and reduces the mean time to isolate (MTTI) during outage events. For integrators balancing speed, density, compliance, and future bandwidth headroom in enterprise or colocation datacenter builds, the FWUYL7575LAM097 delivers the tested reliability and installation efficiency that keeps projects on schedule and within pathway capacity limits.
