Panduit FWTYL7575KAM065 OM5 QuickNet 12-Fiber Trunk Cable Assembly
The Panduit FWTYL7575KAM065 is a 65-meter OM5 SigCore trunk cable assembly engineered for high-density data center deployments requiring wideband multimode fiber (WBMMF) capabilities and ultra-low insertion loss. This 12-fiber PanMPO-to-PanMPO trunk features Low Smoke Zero Halogen (LSZH) jacketing, HD Flex transition construction, and Method A polarity, delivering 40 Gbps per fiber pair at extended reach while consuming 30 to 40 percent less pathway space than standard OM3/OM4 trunk assemblies. Designed for IT infrastructure managers deploying 40G/100G spine-leaf architectures or preparing for 400G migration, this lime-colored trunk includes a factory-installed pulling eye on one end to simplify installation through congested cable trays and tight-radius pathways without field termination or on-site polishing.
Key Features
- OM5 wideband multimode fiber supports short-wave wavelength-division multiplexing (SWDM) for 40G/100G/400G applications with extended reach over legacy OM3/OM4 distances
- 12-fiber PanMPO female to PanMPO female connectors with Method A polarity for plug-and-play compatibility with Panduit cassette modules and breakout panels
- Ultra insertion loss spec ensures consistent performance across all fiber pairs, critical for parallel optics and IEEE 802.3ba compliance at maximum channel lengths
- Low Smoke Zero Halogen (LSZH) jacket meets IEC 60332-3-24 Category C flammability requirements for enclosed plenums, risers, and international installations where PVC off-gassing is prohibited
- HD Flex transition design provides tight-radius bend performance (7.5× cable OD minimum bend radius) for congested pathways and high-density MDA/HDA environments
- Integrated pulling eye on one end rated for mechanical tensile loads during installation, eliminating risk of connector damage when routing through cable trays or innerduct
- 50-micron multimode core with laser-optimized bandwidth performance of 3,500 MHz·km at 850 nm (OM5 spec per TIA-492-AAAD)
- Factory-terminated and tested to TIA-604-5 (FOCIS-5) end-face geometry standards with full insertion loss and return loss certification included
- Lime cable jacket for instant OM5 identification per TIA-598-D color-coding standard, preventing cross-connection with OM3 aqua or OM4 erika violet trunks
- 65-meter (213.25-foot) length optimized for inter-row connectivity in large-scale data centers or campus backbone links between MDFs and IDFs
OM5 wideband multimode fiber represents the most recent evolution in laser-optimized multimode technology, certified to support four discrete wavelength channels (850/880/910/940 nm) over a single fiber pair using short-wave wavelength-division multiplexing (SWDM). This enables 40GBASE-SR4 BiDi, 100GBASE-SR4 BiDi, and emerging 400GBASE-SR4.2 applications to achieve the same reach as traditional parallel optics while using half the fiber count—reducing transceiver port density requirements and simplifying migration paths for existing OM3/OM4 structured cabling plants. The Panduit SigCore OM5 fiber in this trunk is backward-compatible with OM3 and OM4 specifications, so you can deploy it today for 10G/40G/100G applications and gain immediate headroom for future 400G upgrades without re-cabling. Unlike OM4's 550-meter effective modal bandwidth limit at 850 nm, OM5 extends laser-optimized performance across the full SWDM spectrum, ensuring that when you migrate to BiDi transceivers or next-generation parallel optics, your physical layer won't be the bottleneck. The ultra insertion loss specification on this trunk means each of the twelve fibers has been factory-tested to meet or exceed the most stringent loss budgets required by IEEE 802.3ba for 40G/100G Ethernet—typically ≤0.35 dB per mated connector pair. In practice, this gives you margin to accommodate additional mated connections (patch panels, cassettes, or cross-connects) in your channel without exceeding the 1.5 dB to 1.9 dB total channel loss budget mandated by 100GBASE-SR4 optics operating at maximum distance. Method A polarity is the TIA-568 standard for duplex and parallel fiber systems: it maintains transmit-to-receive correspondence when you use a straight-through trunk with key-up/key-down adapter orientation at patch panels or flipped module cassettes. If your infrastructure follows Method A (most Panduit cassette modules, Cisco Nexus line cards, and Arista spine switches default to this), you can plug this trunk directly between PanMPO ports with zero field re-pinning or polarity adapters.
Data center density and thermal management drive the need for slimmer, more flexible trunk cables that don't choke airflow or consume excessive U-space in vertical cable managers. This HD Flex trunk uses a reduced-diameter jacketed construction that occupies 30 to 40 percent less volume than equivalent 12-fiber round trunk designs—freeing up precious pathway space in overhead ladder rack, under-floor trenches, or within-rack vertical routing. The LSZH jacket is mandatory for installations in enclosed spaces where local fire codes (IBC, NFPA 90A, or international equivalents) prohibit PVC due to toxic smoke and corrosive halogen gas release during combustion. Beyond code compliance, LSZH is the de facto standard for hyperscale and colocation facilities where human egress paths run adjacent to cable pathways, and for any site that must meet ISO 14001 environmental management requirements or LEED building certification criteria that penalize halogenated materials. The lime jacket color is specified in TIA-598-D as the mandatory identification for OM5 fiber, ensuring that your technicians won't accidentally cross-connect this trunk with aqua OM3 or erika violet OM4 cables during maintenance or adds/moves/changes—an error that can degrade link margin or cause outright link failure if you're using SWDM optics that rely on OM5's extended bandwidth. At 65 meters, this trunk length is purpose-built for inter-row spine-to-leaf connections in large-scale data centers where racks are distributed across multiple hot/cold aisle pairs, or for vertical riser runs between floors in mid-rise office buildings where a single continuous trunk eliminates the need for intermediate splice enclosures or patch panels that add insertion loss and failure points. The integrated pulling eye—factory-installed on one end of the trunk—gives installers a secure attachment point for pull ropes or cable grips, distributing tensile load across the entire trunk strength member rather than stressing the PanMPO connector boot. This is critical when routing through crowded cable trays with multiple 90-degree bends or when pulling through 1.25-inch innerduct where friction can easily exceed the 50-pound short-term tensile rating of a standard fiber trunk if the load is applied directly to the connector.
This trunk is factory-terminated and end-face polished to meet TIA-604-5 (FOCIS-5) geometry requirements for physical-contact multimode connectors, with each fiber pair tested for insertion loss, return loss, and polarity before it leaves Panduit's ISO 9001-certified manufacturing facility. It ships with a test report documenting per-fiber performance, giving you traceability for TIA-942 Rated-3/Rated-4 data center certification audits or for BICSI DCDC (Data Center Design Consultant) submission packages that require verified insertion loss values for every permanent link in the structured cabling plant. The assembly is fully compliant with TIA/EIA-568-C.1 and C.3 commercial building telecommunications cabling standards, ISO/IEC 11801 Class OM5 specifications, and IEC 60793-2-10 type A1a.3 fiber specifications, ensuring global interoperability with multivendor transceiver ecosystems and acceptance by AHJs (Authorities Having Jurisdiction) in any geographic market. RoHS compliance confirms that the materials and manufacturing processes meet EU Directive 2011/65/EU restrictions on lead, mercury, cadmium, and other hazardous substances, satisfying procurement requirements for multinational enterprises, government contracts, and ESG (Environmental, Social, Governance) reporting frameworks that track supply-chain environmental impact. For integrators deploying 40G/100G leaf-spine fabrics, preparing existing plants for 400G migration, or building out new hyperscale PODs where pathway congestion and fire-safety compliance are non-negotiable, this Panduit OM5 trunk delivers the performance headroom, installation efficiency, and regulatory alignment that let you close out projects on schedule without callbacks for re-termination or code violations.
