Panduit FZ2RPU1U1NNM7.5 7.5m OM4 Duplex LC Fiber Cord

Panduit FZ2RPU1U1NNM7.5 OM4 Multimode Fiber Patch Cord

The Panduit FZ2RPU1U1NNM7.5 is a 7.5-meter duplex LC-to-LC OM4 multimode fiber optic patch cord engineered for 40/100 Gigabit Ethernet deployments in datacenters, enterprise networks, and high-bandwidth AV installations. Built on laser-optimized 50/125 micron OM4 fiber, this assembly delivers 550-meter reach at 10 Gbps and supports 40/100GbE applications up to 150 meters over duplex parallel optics. The purple LSZH jacket provides immediate visual identification of OM4 infrastructure while meeting plenum and low-smoke requirements for in-building cable runs. Panduit's precision-polished LC connectors maintain insertion loss below 0.3 dB typical and ensure TIA-568 compliance across the entire link. Whether you're patching top-of-rack switches to SAN fabric, interconnecting blade chassis in a converged environment, or supporting 4K/8K video distribution over fiber, this assembly provides the low-loss, high-bandwidth foundation modern networks demand.

Key Features

• OM4 50/125 µm laser-optimized multimode fiber — 550m reach at 10 Gbps, 150m at 40/100 Gbps per IEEE 802.3ba
• Duplex LC connectors with precision ceramic ferrules — sub-0.3 dB insertion loss, return loss >20 dB typical
• 7.5-meter length ideal for cross-rack patching, switch-to-patch-panel, and mid-depth cabinet runs
• Purple LSZH jacket — TIA-598 OM4 color code, plenum-rated flame performance, low-toxicity for occupied spaces
• Non-metallic construction eliminates ground loop risk in electrically noisy datacenter environments
• Factory-terminated and tested — traceable test results, no field termination or polishing required

Panduit's OptiCam fiber platform is field-proven in mission-critical infrastructure where link loss budgets leave no margin for error. The FZ2RPU1U1NNM7.5 uses laser-optimized OM4 fiber with 4700 MHz·km modal bandwidth at 850 nm, enabling VCSEL-based 40GBASE-SR4 and 100GBASE-SR4 transceivers to achieve full 150-meter reach over eight fibers (four duplex pairs) or support 40GBASE-SR BiDi over this single duplex assembly. Each LC connector is terminated in Panduit's controlled-environment facility using precision cleave-and-polish processes that hold endface geometry to IEC 61300-3-35 grade-B limits. Ferrule concentricity, apex offset, and fiber height are measured per connector and recorded in lot-traceable quality records. The result: predictable insertion loss across thousands of mating cycles, minimal return loss even under mechanical stress, and zero risk of the intermittent high-loss failures common to field-terminated assemblies. In high-density switch fabrics where a single bad link triggers spanning-tree reconvergence or NIC failover, factory quality control isn't a luxury — it's the baseline.

The 7.5-meter length hits the sweet spot for intra-row datacenter patching: long enough to route from top-of-rack switches down vertical cable managers and across to adjacent cabinets, short enough to avoid the service loop clutter and attenuation penalty of over-provisioned jumpers. In a 42U cabinet with switches at mid-height and patch panels at the top, 7.5 meters provides clean dress to side-mounted vertical managers plus horizontal reach to the next rack. For SANs and hyperconverged clusters, this length supports switch-to-storage array connections within the same hot/cold aisle pair without excess slack that blocks airflow or obscures asset labels. The duplex LC form factor is the de facto standard for 10/25/40/100 Gbps enterprise optics: Cisco, Arista, Juniper, Dell, and HPE all ship SFP+, SFP28, and QSFP28 SR transceivers with duplex LC interfaces. Using Panduit's color-coded assembly ensures your OM4 backbone remains visually distinct from OM3 (aqua) or single-mode (yellow) infrastructure during adds, moves, and changes — critical when a technician is patching under time pressure or working in a dim row.

The LSZH (Low Smoke Zero Halogen) jacket compound meets IEC 60332-1 vertical flame test and IEC 61034 smoke density limits, making this assembly suitable for plenum airspaces, European installations governed by CPR (Construction Products Regulation), and any environment where PVC combustion byproducts pose a life-safety or equipment risk. Non-metallic construction eliminates the strength member and shields found in outdoor-rated assemblies, reducing diameter and improving bend radius in congested horizontal managers. Because there's no metallic path between cabinets, you avoid ground-loop hum and potential difference issues that plague copper links in multi-building campuses or facilities with dirty power. TIA-568 and ISO/IEC 11801 structured cabling standards recognize OM4 as the multimode fiber of choice for 40/100 Gbps applications, and this Panduit assembly meets or exceeds every performance parameter those standards define. For integrators billing datacenter infrastructure projects, factory-terminated jumpers deliver faster installation (no on-site fusion splicing or connector kits), lower material cost per link (no consumables or rework), and a single-vendor warranty that covers fiber, connectors, and performance — simplifying closeout documentation and eliminating finger-pointing when a link fails acceptance testing.