Panduit OM4 2F 2MM PC Ofnp LC Uniboot/cs Connea - FZ2RPU1ZNNNM004

Panduit FZ2RPU1ZNNNM004 OM4 Duplex LC Uniboot Plenum Fiber Patch Cord

Overview

The Panduit QuickNet™ FZ2RPU1ZNNNM004 is a 4-meter (13.1 ft) OM4 multimode duplex fiber patch cord with LC uniboot connectors and a plenum (OFNP) outer jacket. Designed for pre-terminated fiber infrastructure in fiber optic cabling deployments, this cord eliminates field termination labor in data centers, telecom rooms, entrance facilities, and equipment distribution areas. OM4 50/125µm glass supports 40GbE and 100GbE at appropriate distances — meaningful when you're wiring spine-leaf topologies or high-density switch interconnects where bandwidth headroom matters. The LC uniboot design consolidates both fibers into a single slim connector housing, reducing congestion in high-density patch panels and allowing easier polarity management without swapping connector boots.

Compatibility

Compatible with any equipment using LC duplex OM4 multimode fiber interfaces. Panduit QuickNet™ pre-terminated systems are the primary target use case, including QuickNet fiber cassettes, patch panels, and trunk cable assemblies common in structured cabling builds. Works with OM4-compatible SFP+ and QSFP transceivers from Cisco, Arista, Juniper, HPE, and other major switching vendors. Meets TIA-568.3-D, ISO/IEC 11801, and ANSI/TIA-942-B — the three standards most commonly specified in data center network infrastructure RFPs. Plenum (OFNP) jacket satisfies NEC Article 770 requirements for air-handling spaces; use this version wherever the cable path runs through ceiling plenums or raised-floor air returns. Not interchangeable with OS1/OS2 singlemode ports — confirm transceiver type before ordering.

Installation Notes

The uniboot LC connector maintains a consistent polarity scheme — verify your cassette or panel polarity method (A, B, or universal) before deploying in bulk to avoid link failures requiring re-termination. At 4 meters, this cord is suited for within-rack or short inter-rack runs; for longer horizontal or inter-row connections, select a longer pre-terminated assembly from the same Panduit fiber QuickNet™ family. OFNP-rated jacket is plenum-safe but also acceptable in riser and general-purpose spaces — no need to stock multiple jacket variants if plenum is the baseline spec.