HPE OEM DL380 GEN11 8SFF Mod-q KSA SVR - P68498-B21

HPE P68498-B21 ProLiant DL380 Gen11 8SFF Modular-Q Rack Server

Overview

The HPE P68498-B21 is a region-specific configuration of the ProLiant DL380 Gen11 platform — an 8 Small Form Factor (8SFF) bay, modular-Q chassis variant built for enterprise rack deployments. At 88.82 lb, this is a full-weight 2U server intended for permanent data center or server room installation, not edge or branch-office lightweight builds. The P68498-B21 designation targets the KSA (Kingdom of Saudi Arabia) regional market and is manufactured in the Czech Republic (CZ), consistent with HPE's European production facilities for enterprise server lines.

The DL380 Gen11 platform is HPE's flagship 2U dual-socket server family, widely deployed as network video recorder infrastructure, enterprise storage back-ends, and high-density compute nodes. The 8SFF configuration supports up to eight 2.5-inch drives — appropriate for high-IOPS SSD arrays in video analytics or surveillance recording workloads where sequential write throughput and drive density matter.

Key Features

• 8 Small Form Factor Drive Bays: Eight 2.5-inch hot-plug bays provide flexibility for NVMe or SAS/SATA SSDs — relevant for surveillance server builds where high sustained write rates across many camera streams are the bottleneck, not raw compute.
• Modular-Q Chassis Architecture: The modular-Q designation indicates a configurable rear bay and riser layout, giving integrators flexibility on PCIe expansion — important when adding capture cards, GPU accelerators, or additional NIC capacity for large IP camera deployments.
• 88.82 lb Ship Weight: Plan rack infrastructure accordingly. At this weight, two-person lift or a server lift tool is required for safe installation — a practical consideration for data center teams without dedicated lift equipment.
• Czech Republic Manufacturing: Produced in HPE's CZ facility, consistent with factory-new, genuine HPE production — not refurbished or grey-market supply.

Integration & Compatibility

As a ProLiant DL380 Gen11 platform, this server is compatible with HPE's iLO 6 management controller, HPE OneView, and the broader HPE ecosystem of Gen11-compatible DIMMs, drives, and PCIe accessories. For video management software deployments, the DL380 Gen11 is a validated platform for major VMS vendors including Milestone XProtect, Genetec Security Center, and Axis Camera Station — though integrators should confirm specific VMS sizing guides against their final BOM, as configuration details (CPU, RAM, storage) determine actual camera channel capacity and are not specified in the available evidence for this SKU.

Consult HPE's HPE server QuickSpecs for the full compatibility matrix of CPUs, DIMMs, drives, and PCIe options supported in the Gen11 DL380 chassis before finalizing your BOM.

Frequently Asked Questions

Q: What is the HPE P68498-B21?

A: The P68498-B21 is a region-specific (KSA) configuration of the HPE ProLiant DL380 Gen11 rack server with an 8 Small Form Factor drive bay and modular-Q chassis layout, manufactured in the Czech Republic.

Q: How much does the P68498-B21 weigh?

A: The P68498-B21 has a shipping weight of 88.82 lb. Plan for two-person installation or a mechanical server lift when racking this unit.

Q: Is the P68498-B21 compatible with HPE iLO 6?

A: The DL380 Gen11 platform uses HPE iLO 6 as its embedded management controller. However, specific iLO configuration details are not confirmed in the available evidence for this SKU — verify with HPE QuickSpecs for the P68498-B21.

Q: Can the P68498-B21 be used as a network video recorder (NVR) server?

A: The DL380 Gen11 8SFF platform is commonly deployed in surveillance infrastructure as an NVR or VMS host. The 8 SFF drive bays support high-density SSD arrays suited to multi-stream video recording workloads. Exact camera channel capacity depends on the specific CPU, RAM, and storage configuration, which are not detailed in the available evidence for this part number.

Q: Where is the P68498-B21 manufactured?

A: The P68498-B21 is manufactured in the Czech Republic (CZ), consistent with HPE's European enterprise server production facilities.

James Everett

The P68498-B21 is a KSA-regional DL380 Gen11 variant — the 8SFF modular-Q chassis is the configuration I reach for when a project needs drive-bay density and PCIe flexibility in the same 2U footprint. At 88.82 lb, it is a full-weight enterprise chassis; factor that into your rack planning before the unit arrives on site.

Technical Highlights:

• 8SFF Drive Bay Density: Eight 2.5-inch bays in a 2U chassis maximize storage density for SSD-based video recording arrays — relevant when you need sustained write throughput across dozens of simultaneous camera streams.
• Modular-Q Architecture: The modular rear layout provides PCIe riser flexibility for GPU or additional NIC expansion — useful in deployments combining VMS recording with edge analytics workloads on the same host.
• CZ Factory Origin: Czech Republic production is HPE's primary European enterprise server manufacturing site — factory-new, genuine HPE supply chain, not a refurbished or regionally redistributed unit.

Deployment Considerations:

• At 88.82 lb, this chassis requires two-person handling or a mechanical server lift for safe rack installation — do not underestimate the logistics for high-density rack builds where multiple units are being installed in sequence.
• The available evidence does not specify CPU, RAM, or storage configuration for this SKU — confirm full BOM details with HPE QuickSpecs before sizing for camera channel capacity or VMS workloads.

Best fit for enterprise data center or secured server room builds where a high-density 2U dual-socket platform is the foundation for large-scale video surveillance recording or analytics infrastructure.