Middle Atlantic NM Wire Clip 2800 Ivory - 2800WC

Middle Atlantic 2800WC NM Wire Clip for 2800 Series Cable Duct

The Middle Atlantic 2800WC is a single-piece PVC wire clip designed specifically for use with Middle Atlantic's 2800 Series cable duct. If you're managing structured cabling runs in a rack enclosure or wall-mounted channel system and need a reliable mechanical retention point for cables up to 3.2 cm in diameter, this clip is the purpose-built answer — not a workaround. Ivory finish matches the 2800 Series duct color for a consistent, professional installation.

Key Features

• Purpose-built 2800 Series fit: The 2800WC is engineered to match the 2800 Series cable duct profile exactly, so it seats without play or improvised modification. Using a generic clip on a proprietary duct channel risks loosening over time as cable bundles shift — this eliminates that risk.
• PVC construction: Polyvinyl chloride holds its shape across typical indoor rack environments, resists moisture, and won't corrode in proximity to copper cabling or patch panels. For low-voltage and structured data runs, PVC is the practical material choice — it won't introduce electrical interference concerns that metal clips can in dense cable environments.
• 3.2 cm maximum cable diameter: That accommodates most standard Cat6, Cat6A, or coax bundles in a commercial installation. If you're routing oversized multi-conductor bundles or conduit, measure before ordering — this clip is sized for typical structured cabling, not heavy-gauge power runs.
• Ivory color: Matched to Middle Atlantic's standard 2800 Series duct finish. In exposed rack rooms, AV bays, or security head-end rooms where cable management is visible, color-matched hardware is the difference between a professional result and a patchwork appearance.
• Universal application: Rated for universal use, meaning it handles signal, data, and low-voltage cable types without restriction. Deploy it on IP camera home runs, access control wiring, PoE switch patch runs, or any structured cabling segment routed through 2800 Series duct.
• Single-pack (1 pc): Sold individually, so you can order precisely the quantity your cable run requires — no overage from forced multi-packs on projects where you need five clips, not fifty.

Integration and Compatibility

The 2800WC is designed exclusively for the Middle Atlantic 2800 Series cable duct. It is not a universal-fit clip for other duct families or third-party channel systems. If your installation uses a different Middle Atlantic duct series, verify the clip model number against that series before ordering. For cable management in security head-end rooms, the 2800 Series with these wire clips pairs well with structured patch panel layouts feeding network video recorders and PoE switch stacks. Visit the Middle Atlantic accessories catalog for companion duct sections, covers, and mounting hardware. For larger PoE infrastructure deployments, see our network switches selection to complete the head-end build.

Frequently Asked Questions

Q: Is the 2800WC compatible with Middle Atlantic cable duct other than the 2800 Series?

A: No. The 2800WC is specified for the 2800 Series only. Using it with a different duct profile is not supported and may result in a poor fit. Check Middle Atlantic's documentation for the correct clip model number for other duct series.

Q: What is the maximum cable diameter the 2800WC can accommodate?

A: The 2800WC supports cables up to 3.2 cm in diameter. Measure your cable bundle before ordering if you're running multi-conductor bundles or thicker cable types.

Q: What material is the 2800WC made from?

A: It is made from PVC (polyvinyl chloride), which provides adequate rigidity and moisture resistance for typical indoor rack and cable management environments.

Q: How many clips are included per order?

A: The 2800WC is sold as a single piece (1 pc per pack). Order the exact quantity your installation requires.

Q: What color is the 2800WC?

A: Ivory — matched to the standard finish of the Middle Atlantic 2800 Series cable duct for a consistent appearance in your installation.

Eden Phillips

The 2800WC is a detail item — the kind that separates a clean head-end room from a cable management afterthought. Its 3.2 cm maximum cable diameter spec is the number to check before you order: that covers standard Cat6A and coax home runs from IP cameras without issue, but if you're bundling thicker multi-conductor runs through the same duct, you'll want to measure first. I've seen integrators skip that step and end up with clips that don't close properly on oversized bundles.

Technical Highlights:

• PVC construction: Holds its form in the temperature range of typical IDF closets and security head-end rooms. No corrosion concern adjacent to copper patch panels — a consideration metal clips don't fully eliminate.
• 3.2 cm cable diameter ceiling: Sized for standard structured cabling — Cat5e through Cat6A, RG59, and equivalent. Confirms this is a data/low-voltage clip, not a power cable management solution.
• 2800 Series-specific fit: The mechanical fit is purpose-built for this duct family. Generic clips on proprietary duct profiles shift under cable weight over time — this clip is designed to stay seated.

Deployment Considerations:

• Verify your duct series before ordering — the 2800WC is not interchangeable with other Middle Atlantic duct families. If you're mixing duct series in the same installation, you likely need different clip SKUs for each.
• Sold as a single piece. For a full head-end room build, calculate your clip count against your cable run segments before ordering to avoid a second shipment on an active installation.

This clip is the right call for integrators finishing out a 2800 Series cable duct installation in a security operations center, IDF closet, or rack room where cable retention needs to look deliberate — not improvised.