Middle Atlantic NM TWO Tracjack Small DAT - PDB2TJV

Middle Atlantic PDB2TJV Two TracJack Small Data Box

The Middle Atlantic PDB2TJV is a compact, non-metallic two-port TracJack data box designed to deliver clean, permanent low-voltage terminations at the wall — the kind of detail that separates a professional installation from a messy bundle of patch cables dangling behind equipment racks or AV stations. At 3 11/16" L x 2 7/8" W x 3 11/16" H, the PDB2TJV fits standard wall-box rough-in locations while keeping your cabling infrastructure orderly and serviceable for the long term.

Overview

In structured cabling deployments — whether you're terminating data runs for IP cameras, VoIP handsets, access control readers, or general network drops — the quality of the termination point matters. Loose keystone jacks zip-tied to cable trays create confusion during moves, adds, and changes. A dedicated wire and cable accessories solution like the PDB2TJV gives every termination a permanent, labeled home. This two-port configuration is the right size for single-device locations: a workstation drop, a camera node, or a card-reader run where you need exactly two jacks and nothing more.

Middle Atlantic Products has built its reputation across the Middle Atlantic catalog by engineering infrastructure components that installers can actually rely on — consistent fitment, appropriate materials for commercial environments, and form factors that pair with standard electrical rough-in boxes. The PDB2TJV follows that same philosophy in the data box category.

Key Features

• Non-Metallic Construction: The PDB2TJV's non-metallic body means no grounding concerns in sensitive low-voltage environments and no risk of inadvertent shorts to conductors during installation — a practical consideration in mixed-voltage wall cavities common in commercial retrofit work.
• Two TracJack Ports: The two-port TracJack format accepts Middle Atlantic TracJack inserts (sold separately), giving you flexibility to populate with Cat5e, Cat6, Cat6A, fiber, or AV inserts depending on the run — without replacing the box. Specify the insert type per-port based on what that drop needs, not what a pre-configured box dictates.
• Small Form Factor (3 11/16" x 2 7/8" x 3 11/16"): This compact footprint targets locations where a full-size single-gang plate would be disproportionate or where rough-in depth is constrained. It works in drywall, masonry, or low-profile surface-mount applications without adding unnecessary bulk to the wall face.
• Wall Box Mounting: Designed as a wall-mounted solution, the PDB2TJV installs into standard wall-box cutouts, integrating cleanly with existing electrical infrastructure. This means terminations are co-located with the device they serve, keeping cable runs short and traceability obvious during future service calls.
• Ivory Finish: The ivory color coordinates with standard commercial electrical hardware and AV furniture and mounting installations — minimizing visual disruption in office, conference room, or hospitality environments where aesthetics matter to the end client.
• Wire & Cable Accessory Category: As part of a broader structured cabling ecosystem, the PDB2TJV is designed to work alongside cable management panels, patch panels, and keystone inserts — not as a standalone product, but as a systematic termination point in a properly engineered horizontal cabling infrastructure.

Integration & Compatibility

The PDB2TJV accepts Middle Atlantic TracJack inserts and is compatible with standard wall-box rough-in dimensions. If you are planning a full structured cabling deployment for an IP security system — terminating runs from IP cameras, access control readers, or intercom stations — pair this box with the appropriate Category-rated TracJack inserts for the cabling standard you're working to (TIA-568-C.2 for Cat6/6A). Two ports per box means you can serve one primary device plus a spare or a secondary device without running back to a panel for a patch cord on every port.

Surface-mount depth is governed by the wall-box it installs into; verify your rough-in depth matches before ordering, particularly in low-profile metal stud cavities common in commercial tenant improvement work. The non-metallic body is not rated for use in plenum or high-temperature environments — confirm your local code requirements if installing in air-handling spaces.

Frequently Asked Questions

Q: What TracJack inserts are compatible with the PDB2TJV?

A: The PDB2TJV is designed to accept Middle Atlantic TracJack inserts. The specific insert type (Cat5e, Cat6, Cat6A, fiber, AV, etc.) is selected separately based on the cabling standard and media type for each port. Consult the Middle Atlantic TracJack insert lineup to match the insert to your cabling specification.

Q: What are the dimensions of the PDB2TJV?

A: The PDB2TJV measures 3 11/16" (L) x 2 7/8" (W) x 3 11/16" (H) — a small-format box designed to fit standard wall-box rough-in locations without adding bulk.

Q: What color is the PDB2TJV?

A: The PDB2TJV is finished in ivory, coordinating with standard commercial electrical hardware and AV installation components.

Q: Is the PDB2TJV suitable for outdoor or plenum installations?

A: The PDB2TJV is a non-metallic wall box. It is not described as rated for outdoor, plenum, or high-temperature environments. Verify your local code requirements before installing in air-handling or exterior spaces.

Q: How many ports does the PDB2TJV support?

A: The PDB2TJV supports two TracJack ports, making it appropriate for single-device wall drops where two jacks are sufficient — such as a workstation, IP camera node, or card reader location.

James Everett

The PDB2TJV is one of those components that doesn't get talked about much but makes a real difference in how a finished installation looks and services. Its small-format design — 3 11/16" x 2 7/8" x 3 11/16" — is sized for exactly the scenarios where a standard single-gang plate is too large or too deep for the cavity you're working with, and the two-port TracJack configuration means you're not locked into a fixed jack type at rough-in time.

Technical Highlights:

• Non-Metallic Body: Eliminates grounding and short-circuit concerns in mixed low-voltage wall cavities — relevant wherever you're co-locating data runs with other signal cables in commercial retrofit environments.
• Two-Port TracJack Format: Insert-based design lets you specify Cat5e, Cat6, Cat6A, fiber, or AV media type per port at termination time, not at rough-in — a genuine flexibility advantage on projects where the final cabling spec changes between pre-wire and trim-out.
• Small Form Factor Dimensions (3 11/16" x 2 7/8" x 3 11/16"): Fits wall-box locations without adding depth or face-plate bulk — important in shallow metal-stud cavities and finished spaces where the wall face matters to the client.

Deployment Considerations:

• The PDB2TJV requires TracJack inserts specified and ordered separately — confirm insert availability for your media type (Cat6A, fiber, AV) before scheduling trim-out, as insert lead times can differ from the box itself.
• The non-metallic construction is not rated for plenum or exterior use; if your run passes through an air-handling ceiling before reaching the wall box, you'll need to verify plenum compliance on the insert and cabling, not just the box body.

The PDB2TJV is the right specification for commercial tenant improvement projects — conference rooms, private offices, hotel guestrooms — where you need a clean two-jack wall termination that installs flush, coordinates with standard ivory hardware, and stays serviceable when the next occupant changes the cabling layout.