Middle Atlantic NM TEE 290 FOG White - 2915-FW

Middle Atlantic 2915-FW Non-Metallic Raceway Tee Fitting

The Middle Atlantic 2915-FW is a fog white PVC tee fitting designed for the Middle Atlantic 2900 Series non-metallic UniDuct raceway system. If you're routing cable management runs along walls or ceilings and need to branch off in a perpendicular direction — without cutting custom angles or improvising with tape — this is the fitting that closes that gap cleanly. It ships as a single piece and installs without tools in most configurations.

Overview

The 2915-FW (also searched as 2915 FW) is a direct-fit accessory for the 2900 Series raceway family. The tee profile allows a main raceway run to split at a 90-degree branch point, which is the most common junction need in structured cable installations: a horizontal corridor run branching into a room, a vertical riser feeding a horizontal leg, or a junction box feed splitting across two directions. Using a manufacturer-matched fitting instead of a field-improvised solution keeps the raceway system visually consistent and maintains the mechanical continuity of the duct wall — relevant when the install has to pass a facilities or contractor inspection.

The fog white finish matches the standard 2900 Series color palette, so it blends with the raceway channel and cover without a visible mismatch at the junction. For environments where the raceway runs exposed — drop-ceiling perimeters, office walls, retail back-of-house corridors — color consistency at every fitting matters more than it sounds. A mismatched tee in an otherwise uniform run is the kind of detail that gets flagged on a punch list.

Key Features

• PVC Construction: Polyvinyl chloride is the standard material for non-metallic raceway systems — lightweight, dimensionally stable, and paintable if the installation environment changes color schemes later. It won't corrode in humid environments the way steel fittings can, which matters in mechanical rooms or exterior-adjacent walls.
• 3.2 cm Maximum Cable Diameter: The tee accommodates cables up to 3.2 cm in diameter through each branch. For reference, a standard Cat6 cable runs about 6–7 mm, so you have room for bundled runs. Check your actual cable bundle diameter before specifying — this is a hard constraint on fill capacity at the tee junction where three legs converge.
• 2900 Series Compatibility: Designed to mate with the 2900 Series UniDuct raceway channel and cover. Using matched fittings avoids the gap, flex, and aesthetic inconsistency that occurs when mixing fitting families or using generic tees on a manufacturer-specific duct profile.
• TAA Compliant: The 2915-FW meets Trade Agreements Act requirements — relevant for federal, state, and municipal installations where TAA compliance is a procurement condition. Specify this fitting with confidence on government-funded projects without a separate compliance review for this component.
• Fog White Finish: The fog white color matches the standard 2900 Series raceway, giving a uniform appearance across straight sections, elbows, and tee junctions. Consistent color across all fitting types is a small but visible quality indicator in commercial installs.
• Single-Piece Pack Quantity: Sold individually, so you can order the exact count your installation requires without committing to a bulk pack. For retrofit or repair work where you need one or two tees to complete a run, this avoids overstocking.

Integration and Compatibility

The 2915-FW is part of Middle Atlantic's 2900 Series raceway fittings ecosystem. The 2900 Series is a non-metallic (NM) UniDuct system, and this tee fitting is designed to integrate with the matching duct channel and snap-on cover in that family. It is not cross-compatible with 2700 Series or other Middle Atlantic raceway profiles — if your existing raceway is a different series, verify the series number on the installed duct before ordering.

For installations requiring a complete raceway solution, pair this tee with the appropriate straight 2900 Series duct sections, elbow fittings, and end caps. The cable management accessories category includes the full range of 2900 Series fittings if you need to complete a junction kit.

Frequently Asked Questions

Q: Is the Middle Atlantic 2915-FW TAA compliant?

A: Yes. The 2915-FW is TAA compliant, making it suitable for federal, state, and municipal projects with Trade Agreements Act procurement requirements.

Q: What raceway series is the 2915-FW compatible with?

A: The 2915-FW is designed for the Middle Atlantic 2900 Series non-metallic UniDuct raceway system. It is not intended for use with other Middle Atlantic raceway series.

Q: What is the maximum cable diameter the 2915-FW tee fitting supports?

A: The maximum cable diameter is 3.2 cm. Verify your actual bundled cable diameter at the tee junction, as three legs converge at this point and fill capacity is a practical constraint.

Q: What material is the 2915-FW made from?

A: It is made from polyvinyl chloride (PVC), a standard non-metallic raceway material that resists corrosion and is lightweight for wall and ceiling installations.

Q: How many pieces are included per order of the 2915-FW?

A: One piece per pack. The 2915-FW is sold individually, allowing you to order the exact quantity needed for your installation.

Q: Can the 2915-FW be painted to match a different wall color?

A: PVC raceway fittings are generally paintable with appropriate plastic-adhesion primer and paint, though Middle Atlantic does not specify a painting procedure for this fitting. The fog white color is the factory finish.

James Everett

The 2915-FW is the kind of fitting that seems minor until it's the one thing holding up your raceway closeout. The TAA-compliant designation on a PVC tee fitting is worth noting — on government-funded physical security deployments, every BOM component gets scrutinized, and a non-compliant fitting at a branch point can stall a project sign-off. Having TAA compliance confirmed at the fitting level removes that variable.

Technical Highlights:

• TAA Compliance: Verified compliant with the Trade Agreements Act — specify on federal, state, and GSA-schedule deployments without a separate compliance review for this component.
• 3.2 cm Cable Diameter Limit: Three legs converge at a tee, so this is the most constrained point in any raceway run. At 3.2 cm max per branch, a tight bundle of Cat6 and low-voltage alarm cable will typically fit, but measure before you commit to a fill plan that routes everything through this junction.
• PVC / 2900 Series Match: Non-metallic PVC fitting matched to the 2900 Series profile — avoids the cover-gap and flex issues that appear when mixing fitting families on the same duct channel.

Deployment Considerations:

• Confirm the existing raceway is 2900 Series before ordering — Middle Atlantic makes multiple non-metallic raceway series and fittings are not interchangeable across families.
• At a tee junction, three cable legs converge in the same fitting body; the 3.2 cm diameter constraint applies to each branch, but the interior volume at the junction itself limits how much slack you can coil inside. Plan your service loops at the nearest straight section instead.

This fitting is the right specification for commercial and government physical security installations using 2900 Series UniDuct where a branch junction is required — particularly on TAA-restricted projects where every component on the BOM needs to be defensible.