Middle Atlantic NM Flex Pancake. Priced PER Foot. MOQ - 50FT - GR1400-10

Middle Atlantic GR1400-10 Non-Metallic Pancake Overfloor Raceway

Overview

The Middle Atlantic GR1400-10 is a 3-inch-wide, 0.63-inch-tall non-metallic pancake overfloor raceway designed to route low-voltage cables across finished floors without tearing up tile, concrete, or carpet. At just 5/8 of an inch in profile height, it lies flat enough to avoid a trip hazard in active commercial spaces — a practical consideration when you're running surveillance camera feeds, access control wiring, or intercom cabling across an open floor plan where trenching is not an option. Sold per foot with a 50-foot minimum order quantity, the GR1400-10 lets you order exactly the run length you need for each deployment without committing to bulk spool waste.

This raceway is part of the broader Middle Atlantic cable management line, which covers structured cabling, rack systems, and cable management solutions for commercial AV and security infrastructure. If you're planning a longer run or a multi-zone deployment, review the cable management planning guide to size raceway quantities and plan transitions correctly before ordering.

Key Features

• 0.63-inch (1.6 cm) profile height: The flat pancake form factor keeps the raceway below the threshold where most building codes and ADA guidelines flag a floor obstruction as a tripping hazard — important in retail floors, lobbies, and corridors where foot traffic is constant and you can't accept liability exposure from proud cable runs.
• 3-inch (7.6 cm) channel width: Wide enough to accommodate multiple low-voltage cable types side by side — think a camera homerun, an access control reader cable, and a door contact wire running in parallel — without forced bends that stress RJ-45 terminations or exceed minimum bend radius on shielded cable.
• 10-foot (3.1 m) sections, sold per foot (MOQ 50 ft): Sectioned raceway allows you to plan precise runs and cut to length at the job site. The per-foot pricing model means a 73-foot run doesn't force you into a 100-foot spool — reducing material waste on projects where every foot is accounted for in the bid.
• Non-metallic (NM) construction: Non-metallic raceway won't corrode in humid environments, doesn't require grounding like metallic conduit, and won't interfere with magnetic card readers or low-frequency access control credentials that can be affected by nearby ferrous material. Correct choice for interior finished-floor installations; not rated for outdoor or wet locations.
• Gray color: Neutral gray blends with standard commercial flooring finishes — concrete, light tile, industrial epoxy. If your floor is dark or a specific color match is required, evaluate color availability before specifying.
• TAA Compliant: Meets Trade Agreements Act requirements, which means it qualifies for U.S. federal government, GSA schedule, and many state/municipal procurement vehicles that mandate TAA-compliant infrastructure products. If your project has a Buy American or TAA clause, this is confirmed compliant for the GR1400-10 specifically.

Integration & Compatibility

The GR1400-10 is a passive cable management component — it carries cables, it does not terminate, power, or process them. It is compatible with any low-voltage cabling that physically fits within the 3-inch channel width and clears the 0.63-inch internal height. Typical applications include Cat5e/Cat6 Ethernet for IP camera and access control runs, 18/2 or 22/4 alarm and reader cable, and composite or coaxial video feeds. Pair with appropriate raceway fittings and connectors — entry/exit elbows, reducers, and end caps — to complete the installation and maintain a professional, code-compliant finish at transitions. For IP camera deployments requiring longer floor-level cable runs between camera drops and patch panels, this raceway provides a clean, inspectable path that can be opened for re-pulls without demolition.

Frequently Asked Questions

Q: What is the minimum order quantity for the GR1400-10?

A: The GR1400-10 is sold per foot with a minimum order quantity of 50 feet.

Q: Is the GR1400-10 TAA compliant?

A: Yes, the GR1400-10 is confirmed TAA (Trade Agreements Act) compliant, making it suitable for federal, GSA, and government projects with TAA procurement requirements.

Q: What are the physical dimensions of the GR1400-10?

A: Each section is 10 feet (3.1 m) long, 3 inches (7.6 cm) wide, and 0.63 inches (1.6 cm) tall. The low-profile height is designed to minimize trip hazard on finished commercial floors.

Q: Can the GR1400-10 be used outdoors?

A: The GR1400-10 is a non-metallic interior overfloor raceway. It is not rated for outdoor or wet locations — use it on finished interior floors only.

Q: What cable types fit inside the GR1400-10?

A: The 3-inch channel width accommodates standard low-voltage cabling including Cat5e/Cat6 Ethernet, 18/2 or 22/4 alarm/reader cable, and coaxial or composite feeds, provided cables fit within the 0.63-inch internal height constraint.

Q: Is the GR1400-10 the same as GR1400 10?

A: Yes — GR1400-10 (also searched as GR1400 10) refers to the same Middle Atlantic non-metallic pancake overfloor raceway product.

Marty Allison

The GR1400-10 fills a specific gap in commercial security installations: you need to cross an open finished floor with low-voltage cable and you cannot cut, trench, or run overhead. At 0.63 inches tall and 3 inches wide, this raceway sits flat enough to keep you clear of most trip-hazard thresholds while still giving you enough channel width to bundle a camera homerun alongside reader and door contact wire in a single clean run.

Technical Highlights:

• 0.63 in (1.6 cm) profile: Below the threshold that triggers ADA and building code review for floor obstructions in most commercial occupancies — the difference between a compliant install and a punchlist item.
• 3 in (7.6 cm) channel width: Fits Cat6 + 22/4 + coax side by side without stacking or forcing cables past minimum bend radius — a real-world multi-conductor run, not a single-wire scenario.
• TAA Compliant (GR1400-10 verified): Qualifies for GSA schedules and government project procurement vehicles where non-compliant infrastructure gets flagged at closeout — avoid the substitution headache upfront.

Deployment Considerations:

• Per-foot pricing with 50 ft MOQ means you need to plan total run length across all floor crossings before ordering — measure all segments and add 10% for on-site adjustments before submitting the purchase order.
• Non-metallic construction is correct for interior finished floors but is not rated for wet or outdoor locations — if any portion of the run transitions to an exterior threshold or loading dock, you need a rated product for that segment.

Best fit for lobby-level access control wiring or camera homerun pulls in occupied retail and commercial office spaces where floor disruption is not approved and a surface-mount raceway needs to pass a professional appearance inspection.