Middle Atlantic NM Entrance END 5000 Whit - 5010AWH

Middle Atlantic 5010AWH Access 5000 Series Raceway Entrance End Fitting

Overview

The Middle Atlantic 5010AWH is a white entrance end fitting for the Wiremold Access 5000 Series raceway system, designed to transition surface-mounted raceway runs to either 1/2" (12.7mm) or 3/4" (19.1mm) conduit. If you're running Access 5000 raceway through a wall, ceiling, or junction box, this fitting is the specified termination component — it creates a clean, code-appropriate handoff between the raceway body and your conduit infrastructure without improvised adapters or exposed cable ends.

Part of the Middle Atlantic Wiremold cable management line, the 5010AWH is a purpose-built accessory within the Access 5000 family. It ships in white to match standard 5000 Series raceway covers and base channels, keeping finished installations visually consistent across corridors, server rooms, and open office environments.

Key Features

• Dual conduit compatibility — 1/2" and 3/4": A single fitting handles both common EMT and rigid conduit sizes (12.7mm and 19.1mm), so you don't need to stock two SKUs for mixed-conduit sites. Specify your conduit size at installation; the fitting accommodates both without modification.
• Access 5000 Series integration: Engineered specifically for the Access 5000 raceway family — the geometry matches the channel width and snap-fit cover system, so field cuts and workarounds aren't necessary at the transition point. Using the correct series fitting also maintains the raceway's manufacturer design intent at conduit entry points, which matters for inspection sign-off on commercial projects.
• White finish for finished-space installs: The white color matches standard Access 5000 Series components, keeping transitions clean in office corridors, retail interiors, and light commercial spaces where surface raceway is the specified solution. If your site uses ivory or gray raceway, verify the color match before ordering.
• Clean conduit termination: Entrance end fittings eliminate open raceway ends at wall or ceiling penetrations — an important detail on any install where the AHJ (authority having jurisdiction) or general contractor expects a finished appearance at conduit transitions.
• Part of a complete cable management system: The 5000 Series includes straight sections, corners, couplings, and outlet boxes alongside this entrance end, so you can source the full run from a single product family rather than mixing brands at each fitting type.

Integration & Compatibility

The 5010AWH is compatible exclusively with the Wiremold Access 5000 Series raceway. It is not interchangeable with 700 Series, 2000 Series, or other Wiremold families — raceway channel widths and fitting geometries differ between series. Verify your installed raceway series before ordering.

Conduit connection supports standard 1/2" and 3/4" trade-size EMT or rigid conduit, covering the two most common conduit sizes used in low-voltage and branch-circuit raceway transitions in commercial buildings. This fitting does not support 1" or larger conduit.

For security and AV infrastructure integrators routing camera home-runs or access control wiring through surface raceway, the 5010AWH provides the correct transition point where raceway exits the surface and enters a conduit sleeve through a wall or ceiling. Pair with appropriate conduit fittings and bushings on the conduit side per local code requirements.

This fitting is a component accessory — it does not include raceway base, cover, or conduit connectors. Order those separately as part of your Access 5000 raceway kit. For complete system planning, reference the broader Wiremold raceway catalog to confirm all required components for your run.

Frequently Asked Questions

Q: What raceway series is the 5010AWH compatible with?

A: The 5010AWH is designed exclusively for the Wiremold Access 5000 Series raceway. It is not compatible with other Wiremold series such as the 700, 2000, or 4000 Series, which have different channel geometries.

Q: What conduit sizes does the 5010AWH support?

A: The 5010AWH connects Access 5000 Series raceway to either 1/2" (12.7mm) or 3/4" (19.1mm) conduit — the two most common trade sizes used in commercial low-voltage installations.

Q: Is the 5010AWH available in colors other than white?

A: Based on available evidence, the 5010AWH is offered in white. If your project specifies ivory or gray raceway, verify color availability within the Access 5000 Series accessory line before ordering.

Q: Does the 5010AWH include conduit connectors or raceway sections?

A: No. The 5010AWH is the entrance end fitting only. Raceway base, cover sections, couplings, and conduit connectors are separate components ordered as part of your Access 5000 Series build-out.

Q: Is this fitting suitable for outdoor installations?

A: The available evidence does not confirm an outdoor or wet-location rating for the 5010AWH. Access 5000 Series raceway is typically specified for interior commercial applications. Consult the Wiremold Access 5000 installation documentation or your distributor for environmental rating details before specifying for outdoor use.

Jerry Tildsen

The 5010AWH is the kind of fitting that gets overlooked at the spec stage and then causes a field delay when it's missing — it's the designated transition component for Access 5000 Series raceway at conduit entry points, and it supports both 1/2" and 3/4" trade-size conduit from a single SKU. On jobs where we're running surface raceway through a corridor and then diving into conduit through a wall, having this fitting stocked means the transition is clean and inspection-ready rather than patched with tape and a knockout slug.

Technical Highlights:

• Dual conduit sizing (1/2" / 3/4"): One SKU covers both 12.7mm and 19.1mm conduit — eliminates the need to pre-determine conduit size before ordering, which matters on multi-phase projects where rough-in and trim happen weeks apart.
• Access 5000 Series fit: Purpose-built geometry for the 5000 Series channel — the fitting seats correctly without field modification, which is the difference between a 2-minute install and a 20-minute workaround at every conduit transition on a multi-drop run.
• White finish: Matches standard Access 5000 Series white components — consistent appearance across the full run from outlet box to entrance end, which general contractors and owners notice on finished commercial spaces.

Deployment Considerations:

• Confirm your installed raceway is specifically the Access 5000 Series before ordering — Wiremold fitting geometries are series-specific and the 5010AWH will not seat correctly in 700, 2000, or other channel widths.
• The 5010AWH covers 1/2" and 3/4" conduit only — if your conduit design calls for 1" or larger, this fitting is not the right component; check the Access 5000 Series catalog for the appropriate entrance end for larger trade sizes.

This fitting is the right call on interior commercial builds — office corridor raceway runs, retail security camera home-runs, or access control wiring raceways — anywhere Access 5000 is the specified surface raceway and the run terminates into conduit at a wall or ceiling penetration.