Middle Atlantic NM Blank END Fitting PN05 - PN05F20FW

Middle Atlantic PN05F20FW Nonmetallic Raceway Blank End Cap

The Middle Atlantic PN05F20FW is a nonmetallic blank end fitting designed for the Eclipse PN05 raceway series. It caps open channel ends with a clean, finished look — the detail that separates a professional cable management installation from one that just gets the wire from point A to point B. If you are routing structured cabling, low-voltage security wiring, or AV cabling through PN05 surface raceway and need to terminate a run without leaving an open channel mouth exposed, this is the correct part. For broader Middle Atlantic cable management options including raceways, dividers, and fittings, the full line is available.

Key Features

• Nonmetallic construction: The fog white nonmetallic body will not corrode, will not create ground loops against metallic conduit or enclosures, and is safe to handle during installation without cut risk. Correct material choice wherever the raceway runs near painted drywall or finished millwork where a metal cap would leave scuff marks.
• Fog White color match: Matched to the Eclipse PN05 series color spec, so the end fitting blends with the raceway body rather than standing out as an afterthought. On exposed runs in lobbies, corridors, or finished server rooms, color continuity is part of a professional finish.
• Blank (closed) profile: The PN05F20FW uses a solid blank face — no knockout, no conduit entry. That means no field modification needed when you simply need to close the end of a terminated raceway run. If you need a fitting with a conduit entry or reducing adapter, that is a different part number in the PN05 fitting family.
• Eclipse PN05 series compatibility: Designed specifically for the PN05 channel profile. Using the correct series-matched end fitting ensures a flush, gap-free fit. A mismatched end cap leaves gaps that collect dust, fail visual inspection, and can catch low-voltage cable jackets during future pull-throughs.
• Purpose-built for low-voltage cable management: The Eclipse PN05 series is a surface raceway system used in commercial security, AV, and structured cabling installations. This end cap belongs to a complete cable management fitting ecosystem — couplings, inside corners, outside corners, and tees — so a single raceway layout can be fully fitted without mixing brands or profiles.
• Lightweight, tool-free installation: Nonmetallic end caps in this class snap or press onto the channel end without fasteners. Installation adds seconds per termination point, not minutes — a real factor when you are closing out dozens of raceway runs on a large commercial floor.

Integration and Compatibility

The PN05F20FW is part of the Middle Atlantic Eclipse PN05 raceway family. It is intended for use exclusively with PN05-series channel runs. When specifying fittings for a PN05 installation, confirm all fittings — couplings, corners, and end caps — carry the PN05 series designation to guarantee profile compatibility. This fitting installs at the terminal end of a raceway run: at wall penetrations, at equipment enclosure entries, or wherever the raceway terminates without transitioning to another conduit type. For projects requiring rack and enclosure accessories to complement the cable management pathway, Middle Atlantic offers a complete line of complementary hardware.

Frequently Asked Questions

Q: What raceway series is the PN05F20FW compatible with?

A: The PN05F20FW is designed for the Middle Atlantic Eclipse PN05 raceway series. It should not be used with other raceway profiles, as fit and finish will not be correct.

Q: Is the PN05F20FW a blank cap or does it have a conduit entry?

A: It is a blank end fitting — the face is solid with no knockout or conduit entry opening. Use it to close a terminated raceway run cleanly. If a conduit entry is needed at the end of the run, a different PN05 series fitting with an entry knockout is required.

Q: What color is the PN05F20FW?

A: Fog White — matched to the Eclipse PN05 series raceway channel color for a consistent finished appearance on exposed runs.

Q: Is the PN05F20FW made of metal or plastic?

A: Nonmetallic. This eliminates corrosion risk and avoids any conductive contact with cables or adjacent metallic surfaces.

Q: Where is this fitting typically installed?

A: At the terminal end of a PN05 surface raceway run — wherever the raceway channel stops and no further fitting (corner, coupling, or conduit adapter) is needed. Common locations include wall termination points, cabinet entries, and end-of-run positions on finished walls in commercial spaces.

James Everett

The PN05F20FW is the finishing detail most integrators order as an afterthought — and then scramble for when closeout inspection hits. The nonmetallic, fog white blank end fitting for the Eclipse PN05 raceway is a small part with a specific job: terminate a surface raceway run cleanly without leaving an open channel mouth that collects debris, catches cable jackets on future pulls, or fails a visual punch-list walkthrough.

Technical Highlights:

• Nonmetallic body: No corrosion, no galvanic contact risk against adjacent metallic conduit or enclosure edges — correct material call for finished interior spaces where appearance and longevity both matter.
• Fog White color match: Series-matched to the Eclipse PN05 channel color, so end fittings integrate visually rather than standing out on exposed wall runs in lobbies, corridors, or finished data rooms.
• Blank (no-entry) face: Solid profile — no field modification, no knockout to deal with. Install it in seconds at any raceway termination that does not transition to another conduit type.

Deployment Considerations:

• Confirm every fitting on a PN05 layout — couplings, corners, and end caps — carries the PN05 series designation. Mixing series profiles from the same manufacturer is a common fit error that shows up at closeout.
• This is a blank end cap, not a reducing adapter or conduit-entry fitting. If the raceway run terminates into a conduit stub or requires a feed-through opening, you need a different part number from the PN05 fitting family — ordering the wrong end type is the single most common procurement mistake on raceway projects.

For commercial security and AV installations in finished interior spaces — corporate lobbies, healthcare corridors, education facilities — where the cable management pathway is visible and the closeout punch-list includes aesthetics, the PN05F20FW is the correct end termination for PN05 surface raceway runs.