Panduit CFGBIW Brush Insert for GFCI Faceplate

Panduit CFGBIW Pan-Net® Brush Insert for GFCI Faceplates

The Panduit CFGBIW brush insert solves a persistent cable-management problem in AV and data installations: routing HDMI, USB-C, and power cables through GFCI-equipped faceplates without compromising aesthetics or fire-stop integrity. Designed for conference rooms, collaborative workstations, and huddle spaces where power and low-voltage converge at the wall, this International White brush insert provides a cable pass-through that blocks dust and debris while maintaining a finished appearance. The ABS construction delivers mechanical durability under repeated cable insertion, and the brush-filament design accommodates multiple cable diameters simultaneously—critical when a single faceplate services both 120VAC convenience outlets and AV connectivity. RoHS compliant for institutional and government purchasing requirements.

Key Features

• Brush-filament design allows multi-cable pass-through while blocking dust, insects, and airflow
• International White finish matches standard GFCI and decorator-style faceplates
• ABS thermoplastic construction resists impact and UV degradation in high-use environments
• Compatible with Panduit Pan-Net® GFCI faceplate systems
• Low-profile form factor (0.6mm height) fits flush within faceplate cavity
• RoHS compliant for LEED, federal, and institutional procurement standards
• Packaged individually with carton quantity of 10 for project-based purchasing

Conference rooms and collaboration spaces frequently require GFCI-protected power at table-height or wall-mounted locations—but those same locations also need to serve HDMI cables to displays, USB-C for charging and data, and Ethernet for PoE devices. Standard GFCI faceplates leave installers with three bad options: drill a rough opening that violates fire rating, leave cables draped over the faceplate edge, or use knockout plugs that require removal every time a cable is added. The CFGBIW brush insert provides a fourth option: a purpose-built pass-through that maintains the faceplate's finished appearance while allowing cables to enter and exit freely. The brush filaments part around cable jackets from 2mm to 12mm diameter, then close behind them to block air infiltration and prevent dust accumulation inside the gang box. This is particularly important in ceiling-fed conference-table installations where the gang box is accessible from above—an open faceplate pass-through becomes a pathway for dust, construction debris, and even small insects. In healthcare and food-service environments, this closure is a cleanability requirement; the brush surface wipes down without exposing the interior cavity.

The International White colorway matches the off-white tone of commercial-grade GFCI receptacles and most decorator faceplates from Leviton, Hubbell, and Eaton, ensuring color consistency across mixed-vendor installations. ABS thermoplastic construction provides the necessary stiffness to resist deformation when cables are pulled at oblique angles—a common scenario when installers route cables through the faceplate before terminating at the equipment end. The material is also non-hygroscopic, meaning it won't swell or distort in high-humidity environments such as natatoriums, locker rooms, or exterior-wall installations in coastal regions. Installation is tool-free: the insert snaps into the faceplate's brush-insert cavity with finger pressure, and removal for reconfiguration requires only a flathead screwdriver to lever the insert out from one edge. This makes it practical for AV integrators to pre-install the inserts during rough-in, then remove and reinstall them after cable pulling to ensure the brush filaments aren't damaged by bulk cable pulls.

Dimensions are 1.8mm wide by 0.6mm height by 3.8mm length, designed to fit Panduit's Pan-Net GFCI faceplate family. The low profile ensures the insert sits flush within the faceplate cavity, preventing snag points that could catch on cable jackets during insertion. Each insert is individually packaged, with a carton quantity of 10—a packaging structure that aligns with typical project quantities for conference rooms (one faceplate per table position, six to eight tables per room). The product is RoHS compliant, meeting lead-free and restricted-substance requirements for installations subject to LEED v4 Materials and Resources credits, GSA Federal Acquisition Regulation environmental standards, and California Proposition 65. This compliance is particularly relevant for K-12 and higher-education AV projects where environmental certifications are a bidding requirement. The CFGBIW integrates into Panduit's Pan-Net structured cabling ecosystem, which includes matching GFCI faceplates, modular jacks, and cable-management accessories—allowing single-vendor sourcing for mixed power and low-voltage faceplate assemblies in commercial interiors.