Middle Atlantic Nivo 15/16 4 Drop Silver Gray - AUNV224DG1SLG

Middle Atlantic AUNV224DG1SLG Nivo Acoustic Ceiling Tile, 2x2 ft, 4-Inch Drop, Silver Gray

The Middle Atlantic AUNV224DG1SLG is a 2' x 2' acoustic ceiling tile from the Middle Atlantic Nivo series, designed for lay-in grid ceilings in AV equipment rooms, network operations centers, and open-plan commercial spaces where ambient noise management matters as much as cable management. The tile drops 4 inches below the grid plane, creating a recessed shadow-line aesthetic while housing structured wiring, cable trays, or in-ceiling speaker components above the finished ceiling surface. If you're fitting out a commercial acoustic ceiling tile grid and need a clean, color-consistent tile that integrates with standard 15/16-inch T-bar systems, this is the correct starting point.

Key Features

• 100% PET Felt Construction: The tile is fabricated from PET (polyethylene terephthalate) felt — a recycled-content textile that absorbs mid- and high-frequency sound rather than reflecting it back into the room. In an equipment room or huddle space with hard surfaces, this material class meaningfully reduces reverb and intelligibility problems without adding bulk to the ceiling assembly.
• 4-Inch Drop Profile: The 4-inch drop creates a defined reveal between the tile face and the grid plane. In practical terms, this gives you roughly 4 inches of above-tile clearance for cable routing, conduit, or in-ceiling speaker enclosures — useful in AV installs where you need to keep structured cabling out of the occupied zone while maintaining access via the lay-in grid. The tile body itself measures 2 in. (H) x 2 in. (W) x 4 in. (D).
• 2' x 2' Footprint (60.33 x 60.33 cm): This is the standard North American suspended ceiling module size, compatible with the overwhelming majority of commercial grid installations. No custom cutting required for standard bays; the 60.33 cm metric dimension also aligns with metric grid systems common in healthcare and education builds.
• 15/16-Inch Lay-In Mounting: The tile is engineered for 15/16-inch T-bar lay-in grids — the predominant commercial ceiling grid standard in North America. Drop it into the T-bar, and it seats flush. No clips, no adhesive, no special hardware. This also means it lifts out for above-ceiling access during moves, adds, and changes — a practical consideration in any space that evolves over time. Pair with compatible ceiling grid accessories for a complete installation.
• Silver Gray Color: The Silver Gray finish is a neutral, professional tone that reads as architectural rather than functional — it won't visually compete with projector screens, video walls, or wayfinding signage. Consistent color across the field ceiling is achievable by specifying all tiles from the same production run.
• Commercial-Grade PET Felt: PET felt is dimensionally stable, does not sag under normal HVAC airflow conditions, and carries no fiberglass content — relevant in spaces where air quality standards or occupant sensitivity to airborne particulates is a concern. The 100% polyester composition also means the tile is cleanable with standard fabric-safe products without surface degradation.

Integration and Compatibility

The AUNV224DG1SLG is designed for standard suspended ceiling grid systems using 15/16-inch T-bar lay-in track. It does not require a proprietary grid or special edge detail. For AV and security integrators, the 4-inch drop profile and standard 2x2 module size make this tile a practical choice in rooms where in-ceiling speakers, occupancy sensors, or IP camera domes are mounted at the ceiling plane — the drop creates visual separation between devices and the tile field without requiring custom fascia or trim rings.

The tile fits directly into the Middle Atlantic Nivo acoustic ceiling tile system and is intended to coordinate with other tiles and accessories in that product family. When specifying for a multi-room deployment, confirm all tiles are sourced from the same color batch to avoid visible shade variation across the ceiling field — PET felt can exhibit minor lot-to-lot color shift under certain lighting conditions.

Frequently Asked Questions

Q: What ceiling grid standard does the AUNV224DG1SLG require?

A: The AUNV224DG1SLG is designed for standard 15/16-inch lay-in T-bar ceiling grids — the most common commercial suspended ceiling system in North America. No proprietary grid hardware is required.

Q: What is the tile size and how far does it drop below the grid?

A: The tile covers a 2-foot by 2-foot (60.33 x 60.33 cm) ceiling bay and drops 4 inches below the T-bar plane. The tile body itself measures 2 in. high x 2 in. wide x 4 in. deep.

Q: What material is the AUNV224DG1SLG made from?

A: It is constructed from 100% PET felt (polyethylene terephthalate polyester). PET felt is a recycled-content acoustic textile — it absorbs sound, contains no fiberglass, and is cleanable without surface damage.

Q: Can I use this tile in a standard commercial drop ceiling without special hardware?

A: Yes. The tile is a lay-in design — it seats directly into the 15/16-inch T-bar grid without clips or adhesive and can be lifted out for above-ceiling access at any time.

Q: Is this tile suitable for rooms with in-ceiling AV or security devices?

A: The 4-inch drop profile and standard 2x2 module format are compatible with in-ceiling speaker enclosures, occupancy sensors, and camera dome cutouts. The above-tile space created by the drop accommodates cable routing and mounting hardware for these devices.