APC by Schneider Electric AR7212A NetShelter SX 750mm Wide x 1200mm Deep Rack Top Panel

Overview

The AR7212A is a replacement or supplemental top panel designed for APC NetShelter SX open-frame and enclosed rack enclosures in the 750mm-wide, 1200mm-deep configuration. At 724mm wide and 908mm deep with a 16mm profile, it fits flush with the NetShelter SX chassis without adding meaningful vertical footprint — important when rack space is allocated down to the unit. The panel ships in black and carries RoHS, REACH, PEP, and EOLI compliance certifications, meeting the documentation requirements common in government, healthcare, and EU-regulated facility deployments.

If your NetShelter SX 750×1200 rack is missing its top panel — whether from a retrofit, a damaged original, or an open-frame build that later required a closed top for cable management or airflow control — the AR7212A is the direct-fit replacement. It is not a universal fit: confirm your rack is the 750mm-wide, 1200mm-deep NetShelter SX variant before ordering, as APC produces top panels across multiple width and depth combinations that are not interchangeable.

Key Features

• Rack-specific fit (750mm × 1200mm): Sized at 724mm wide and 908mm deep, the AR7212A drops directly onto the NetShelter SX 750×1200 frame without modification — no drilling, no adapter hardware. This matters when you are replacing a damaged panel mid-deployment and cannot afford rack downtime.
• 16mm panel height: The minimal 16mm profile means the top panel consumes no usable rack unit space and does not interfere with overhead cable trays or raised-floor cable entry points in tight data closets or server rooms.
• RoHS and REACH compliance: Satisfies the hazardous-substance documentation requirements for EU and California Prop 65 environments. PEP and EOLI certifications additionally support environmental product declaration requirements in green-building and government procurement contexts.
• Black finish: Matches the standard NetShelter SX chassis finish, maintaining a consistent appearance in multi-rack rows — relevant in client-facing data rooms and co-location environments where rack aesthetics matter.
• Packaged for safe transit: Ships at 9kg in a 830mm × 1127mm × 102mm carton, providing adequate protection for a panel that would be difficult to source locally in an emergency.

Compatibility

The AR7212A is designed for the APC by Schneider Electric NetShelter SX rack enclosure line, specifically the 750mm-wide, 1200mm-deep variant. Do not assume compatibility with NetShelter SX 600mm-wide racks, NetShelter VX, or NetShelter CX enclosures — APC top panels are not cross-compatible across those lines. If you are unsure of your enclosure model, check the nameplate on the left vertical rail of the rack before ordering. For complete rack builds, consider pairing with the appropriate rack accessories and power distribution units from the same NetShelter family to maintain consistent mounting geometry.

Frequently Asked Questions

Q: What rack enclosures is the AR7212A compatible with?

A: The AR7212A is designed for APC NetShelter SX enclosures that are 750mm wide and 1200mm deep. It is not compatible with 600mm-wide NetShelter SX racks, NetShelter VX, or NetShelter CX enclosures. Verify your rack model before ordering.

Q: Does the AR7212A add any rack unit height to my enclosure?

A: No. The panel profile is 16mm, which is below one rack unit (44.45mm) and does not consume usable 1U space inside the enclosure.

Q: Is the AR7212A RoHS compliant?

A: Yes. The AR7212A carries RoHS and REACH compliance certifications, along with PEP and EOLI environmental certifications.

Q: What does the AR7212A weigh, and how is it packaged?

A: The packaged unit weighs 9kg and ships in a 830mm × 1127mm × 102mm carton.

Q: Can I use the AR7212A on a NetShelter SX 750mm × 1070mm deep rack?

A: No. The AR7212A is dimensioned for the 1200mm-deep variant. A different top panel part number is required for 1070mm-deep NetShelter SX enclosures.