APC by Schneider Electric AR7007A NetShelter SX 48U 600mm Perforated Curved Door

Overview

The APC by Schneider Electric AR7007A is a replacement and upgrade perforated curved door engineered for the NetShelter SX 48U 600mm-wide rack enclosure family. If you're running a high-density equipment room, server closet, or security operations center where airflow management and physical access control both matter, this door addresses both without requiring a new rack chassis. The curved perforated design is not cosmetic — it directly affects front-to-back airflow patterns that determine whether your servers and network gear stay within thermal limits under sustained load.

The AR7007A ships in black, matching the standard NetShelter SX finish, and is dimensioned at 600mm wide x 35mm deep x 2182mm tall — sized precisely for 48U rack frames in the SX line. That 2182mm height spans the full usable front face of a 48U enclosure, providing consistent door-to-frame sealing across the entire rack height rather than leaving gaps at top or bottom rails.

Key Features

• 48U Full-Height Coverage: At 2182mm tall, this door covers the complete front face of a 48U NetShelter SX frame — no partial panels, no exposed rail segments. That matters for physical security compliance in data centers and security operations centers where open rack faces are an audit finding.
• 600mm Wide Format: Matched to the 600mm NetShelter SX chassis width. Attempting to fit a 750mm door here will cause frame interference — verify your rack's nominal width before ordering. If your existing enclosure is a 750mm-wide SX, you need the corresponding 750mm door variant.
• Perforated Curved Panel Design: Perforation allows front-to-back airflow through the door rather than forcing air around it. In high-density deployments where equipment fans are pulling hard against inlet resistance, a solid door can raise inlet temperatures several degrees — perforated panels reduce that resistance meaningfully.
• Black Finish: Matches the standard APC by Schneider Electric NetShelter SX color scheme. Relevant if you're replacing a damaged door on an existing rack and need visual consistency in a customer-facing or executive-visible installation.
• Direct Replacement Compatibility: Designed as a factory-matched component for the NetShelter SX rack enclosure line — no drilling, no adapter brackets, no fitment guesswork when replacing a door on an existing 48U 600mm SX frame.

Integration and Compatibility

The AR7007A is purpose-built for the NetShelter SX 48U 600mm rack enclosure family. Before ordering, confirm your existing rack chassis is an SX series (not AR, AV, or SV series) and that the nominal width is 600mm. APC's rack accessories ecosystem covers multiple enclosure families, and door components are not cross-compatible between frame widths or series lines. If you're unsure which enclosure you have, the rack's model number is typically on a label inside the front door frame or on the top-rear of the chassis.

For data centers and network rack cabinet deployments where rack-level airflow containment is part of the thermal design, pair this door with APC's blanking panels to seal unused U-spaces — open slots undermine the airflow benefit the perforated door provides.

Frequently Asked Questions

Q: Is the AR7007A compatible with all NetShelter SX racks?

A: The AR7007A is matched to the NetShelter SX 48U enclosures with a 600mm nominal width. It is not designed for 750mm-wide SX frames or for other APC enclosure families (AV, SV, AR series). Confirm your rack's series and width before ordering.

Q: Does the AR7007A fit a 42U rack?

A: No. The AR7007A is dimensioned for 48U enclosures (2182mm tall). A 42U rack has a shorter frame height and requires a different door part number.

Q: What color is the AR7007A?

A: Black, matching the standard NetShelter SX finish.

Q: Is this a perforated or solid door?

A: Perforated and curved. The perforation supports front-to-back airflow, which is important in thermally dense rack deployments.

Q: What are the exact dimensions of the AR7007A?

A: 600mm wide x 35mm deep x 2182mm tall, per manufacturer data.

Jerry Tildsen

The AR7007A comes up most often in two scenarios: a damaged door on an existing 48U 600mm NetShelter SX rack that needs a like-for-like replacement, and planned deployments where the architect specified perforated front doors to support hot-aisle/cold-aisle airflow containment. In both cases, the 2182mm height and 600mm width are the spec constraints that determine whether this part fits your frame — get those wrong and you're returning a door that weighs several kilograms.

Technical Highlights:

• 48U Height (2182mm): Spans the full front face of a 48U SX enclosure — no gap between door edge and top cap or bottom sill. Critical for installations where the rack is inside a physical security perimeter that requires no visible equipment access points.
• 600mm Nominal Width: Frame-matched to the 600mm SX chassis. This is the narrower of the two common SX widths (600mm vs 750mm) — double-check your rack label before ordering, since the two door variants are not interchangeable.
• Perforated Curved Panel: Curved geometry stiffens the panel against flex under repeated open/close cycles while the perforation keeps airflow resistance low. In high-density racks where servers are pulling maximum inlet airflow, a solid door can measurably increase inlet temperatures — this door avoids that.

Deployment Considerations:

• Verify the rack series before ordering — APC makes multiple enclosure families (SX, SV, AV) and doors are not cross-compatible. The NetShelter SX model number starts with AR followed by a four-digit code; if your chassis starts with a different prefix, this door likely will not fit.
• No package contents data is available in current evidence — confirm with your supplier whether hinge hardware and lock cylinder are included or need to be sourced separately from the existing door assembly.

The AR7007A is the right specification for a NetShelter SX 48U 600mm rack in a security operations center, network closet, or server room where you need a direct factory-matched door replacement that maintains the original airflow and physical security characteristics of the enclosure.