Panduit WMPVF22E NetRunner 22RU Single-Sided Vertical Cable Manager
The Panduit WMPVF22E NetRunner vertical cable manager delivers organized, accessible cable routing for 19" and 23" EIA-compliant racks in telecommunications rooms and data centers. This 22RU single-sided design handles high-density copper and fiber installations while maintaining the bend radius protection required for Category 6A and OM4/OM5 fiber—critical for preventing signal degradation and maintaining warranty compliance. The 4.9" width and integrated finger-style management system keep patch cords, trunk cables, and fiber bundles separated and accessible during adds, moves, and changes without the footprint penalty of dual-sided managers.
Key Features
- 22RU height coverage (38.5" usable) manages full-rack or mid-rack cable runs in standard telecommunications and data center installations
- Single-sided 4.9" wide design conserves aisle space while providing adequate capacity for typical 48-port switch deployments
- Flexible plastic finger management allows tool-free cable routing and reorganization during maintenance windows
- Dual-hinged cover provides front access to cables while protecting against accidental snags during adjacent rack work
- Engineered bend radius control prevents kinking in high-performance copper (Cat 6A, Cat 8) and maintains ANSI/TIA-568 minimum bend radius for fiber trunks
- Black powder-coat finish matches standard IT equipment aesthetics
- RoHS compliant construction meets procurement requirements for federal, healthcare, and corporate data center projects
High-density rack environments create cable management challenges that directly impact both installation labor and long-term operational efficiency. When 48-port switches stack vertically with storage arrays, KVMs, and network appliances, unmanaged patch cords obstruct airflow, complicate troubleshooting, and increase the risk of accidental disconnects during adjacent equipment service. The WMPVF22E addresses these issues through a finger-style vertical manager that routes cables along the side of the rack rather than across the front face of equipment. The 6.5" depth accommodates bundled patch cords and provides sufficient working room to dress cables without forcing tight bends that violate manufacturer specifications. For Category 6A installations, maintaining the 4x cable diameter minimum bend radius is non-negotiable—kinked cables fail certification and create intermittent 10GBASE-T link issues that are difficult to diagnose post-installation. The NetRunner finger design naturally guides cables through gentle curves rather than sharp 90-degree turns.
The dual-hinged cover is a practical feature for active data centers where racks remain populated during infrastructure upgrades. Unlike solid-panel managers that require complete removal for cable access, the hinged design lets technicians swing open one section to add a new patch cord or trace a connection without exposing the entire vertical run. This contained access reduces the risk of disturbing adjacent cables—particularly important in fiber installations where accidental contact can unseat LC connectors or introduce dirt into ferrules. The single-sided configuration is optimal for row deployments where rear access is limited or where back-to-back racks share a common hot aisle. By concentrating cable management on the front-accessible side, the WMPVF22E eliminates the need to reach behind equipment or navigate tight clearances between rack backs and walls. Installers running vertical riser cables from floor-level fiber trays to top-of-rack switches will appreciate the 22RU height, which provides continuous management across most of a 42RU rack's active equipment zone without requiring multiple stacked managers and the alignment gaps they create.
Panduit designed the NetRunner series specifically for telecom rooms and enterprise data centers where equipment churn is frequent and cable plant longevity is measured in years. The WMPVF22E ships ready to mount on standard EIA 19" or 23" racks using included hardware, installs in minutes, and integrates with Panduit's broader portfolio of horizontal and overhead cable management accessories. Meets RoHS material restrictions for projects requiring environmental compliance documentation, and the black finish coordinates with Panduit NetKey patch panels, fiber enclosures, and rack PDUs for a unified professional appearance.
