Zebra 3PTY-MOB-036276 Anti-Shock IK06 Screen Protector for ET40 and ET45
Overview
The Zebra 3PTY-MOB-036276 is a Mobilis-manufactured IK06-rated anti-shock screen protector sized for the Zebra ET40 and ET45 10-inch enterprise tablets. If you are deploying ET4X tablets in environments where the screen faces repeated contact — warehouse pick stations, receiving docks, retail back-of-house, or field service carts — a bare screen accumulates micro-fractures that compound over a device's service life. The IK06 rating means this protector is validated to absorb impacts up to 1 joule under the IEC 62262 standard, providing a measurable layer of defense without adding meaningful bulk to the device form factor.
Key Features
- IK06 Impact Rating: validated to withstand 1-joule impacts per IEC 62262 — the specification that separates purpose-built protective film from consumer-grade glass. In a multi-shift warehouse environment, this is the threshold that keeps a cracked screen from becoming a same-day device swap.
- ET40 and ET45 10-Inch Fit: cut specifically for the Zebra ET4X 10-inch tablet family — no trimming, no air gaps at the edges that trap debris and undermine adhesion over time.
- Mobilis Construction: Mobilis specializes in protective accessories for enterprise mobile devices, so the 3PTY-MOB-036276 (often searched as 3PTY MOB 036276) is a purpose-engineered fit rather than a generic aftermarket cut.
Integration and Compatibility
Confirmed compatible with the Zebra ET40 and ET45 running a 10-inch display. Verify your specific ET4X variant's display size before ordering — Zebra offers the ET40 and ET45 in both 8-inch and 10-inch configurations, and screen protectors are not interchangeable between sizes. If your fleet runs the 8-inch variant, a separate Mobilis SKU is required.
Frequently Asked Questions
Q: What impact standard does the 3PTY-MOB-036276 meet?
A: It carries an IK06 rating under IEC 62262, which certifies resistance to 1-joule impacts — appropriate for general commercial and light industrial handling environments.
Q: Which Zebra tablets is this screen protector compatible with?
A: The 3PTY-MOB-036276 is designed for the Zebra ET40 and ET45 tablets in the 10-inch display configuration. It is not confirmed compatible with the 8-inch ET40/ET45 variants.
Q: Will this screen protector fit if I have a case installed on my ET45?
A: Case compatibility depends on the case design and bezel depth. Confirm with your case supplier whether the combined fitment is supported — no case compatibility data is available in the manufacturer evidence for this SKU.
Q: Is this a glass or film protector?
A: The specific construction material (tempered glass vs. multi-layer film) is not detailed in the available manufacturer data for this SKU. Contact the supplier for material confirmation if your deployment environment requires a specific type.
The 3PTY-MOB-036276 addresses a specific gap in ET4X tablet deployments: the stock display has no factory-applied impact layer, and in active warehouse or field-service use, that matters. The IK06 rating — 1 joule under IEC 62262 — is the key number here. It is not the highest available (IK08 covers 5 joules, IK10 covers 20 joules), so this protector fits medium-duty use cases, not heavy drop or impact environments.
Technical Highlights:
- IK06 Anti-Shock Rating: 1-joule impact resistance per IEC 62262 — enough for counter-top contact, incidental drops onto conveyor edges, and the kind of repeated low-energy impacts typical in pick-and-pack or retail back-office deployments.
- ET4X 10-Inch Precision Cut: sized for the ET40 and ET45 10-inch display specifically — the fit matters for touch sensitivity and edge sealing, both of which suffer on generic-cut protectors.
- Mobilis Enterprise Focus: Mobilis produces accessories purpose-built for enterprise mobile hardware, which typically means tighter dimensional tolerances and adhesive formulations suited to long-term deployment versus frequent consumer device replacement cycles.
Deployment Considerations:
- Verify display size before ordering — the ET40 and ET45 ship in both 8-inch and 10-inch variants, and this SKU only fits the 10-inch. Mixing sizes in a fleet order is the most common procurement error with this product line.
- IK06 is appropriate for light-to-medium impact exposure. If your tablets routinely see drops from cart height (roughly 1 meter onto concrete), evaluate whether a higher IK-rated option or a full protective case is the right primary protection strategy.
The 3PTY-MOB-036276 is a sound fit for ET40/ET45 10-inch fleets in retail, healthcare receiving, or light warehouse roles where the display faces everyday contact rather than heavy industrial abuse — and where maintaining touch responsiveness across a multi-year deployment cycle matters more than maximum drop protection.
