Panduit MLT2H-LPAL Pan-Alum Aluminum Cable Tie 7.9in 50-Pack
Overview
The Panduit MLT2H-LPAL is a aluminum cable tie from the Pan-Alum® line — engineered for installations where steel or nylon won't cut it. At 7.9 inches in length with a heavy cross-section and 222 lb tensile strength, these ties handle demanding bundle runs in panel boards, raceways, and anywhere a lightweight but strong metal fastener is the right call. The self-locking head design locks into any position along the tie, so you don't have to thread to a precise point — that speeds up installation when you're working through a dense wire bundle. Smooth edges on the aluminum reduce the risk of cuts during handling and post-installation inspection, a real consideration on high-volume wire management jobs.
Compliant with CE, ABS, and LR standards, the MLT2H-LPAL (often searched as MLT2H LPAL) is appropriate for general commercial and light industrial wire management across a range of environments. Sold in 50-piece packages with a 250-piece carton quantity, it fits naturally into both small project buys and stocking orders for facilities teams.
Key Features
- 222 lb Tensile Strength: Heavy cross-section aluminum delivers 222 lb pull strength — enough for dense, heavy cable bundles in panel builds or conduit transition points where nylon ties would fail under tension or temperature cycling.
- Self-Locking Head Design: Locks at any point along the tie body, not just the tip. This means faster installs in tight spaces — you don't need to reach the head to the end before cinching down, which matters when you're working deep inside an enclosure.
- 7.9in Length / 2in Max Bundle Diameter: Sized for medium-to-large bundle runs. A 2-inch max bundle diameter handles multi-conductor runs typical in structured cabling and wire management applications without needing to daisy-chain ties.
- Aluminum Construction: Lighter than steel ties, flexible enough for manual installation, and corrosion-resistant. Silver finish is visually neutral in panel or rack environments. For use with Panduit mounting hardware ST2MT, HTMT, and ST3MT when a mount anchor is needed.
- Smooth Edges: Deburred aluminum edges reduce laceration risk during tightening and later when pulling cables through a dressed bundle — a safety spec that matters on multi-day panel builds with multiple technicians.
- CE, ABS, and LR Standards: Third-party compliance marks covering electrical, marine, and commercial building applications. Useful where an inspector or commissioning engineer requires documented standards compliance on tie-down hardware.
- 50-Piece Pack / 250-Piece Carton: The 50-pack quantity is practical for project-specific buys; the 250-piece carton makes sense for facilities stock. No excess waste on small jobs, no re-ordering mid-project on larger ones.
Integration & Compatibility
The MLT2H-LPAL is compatible with Panduit cable tie mounts ST2MT, HTMT, and ST3MT when anchored mounting is required — useful in raceway builds, panel interiors, or network infrastructure enclosures where free-floating ties aren't acceptable. As part of the Panduit wire management line, these ties integrate with the broader Pan-Alum and Pan-Steel® ecosystem of mounts, bases, and tools already deployed in many commercial facilities.
What's in the Box
- 50x Panduit MLT2H-LPAL Pan-Alum aluminum cable ties (7.9in, silver)
Frequently Asked Questions
Q: What is the tensile strength of the MLT2H-LPAL?
A: The MLT2H-LPAL is rated at 222 lb tensile strength, suitable for heavy cable bundle applications in commercial panel and raceway installations.
Q: What is the maximum bundle diameter the MLT2H-LPAL can accommodate?
A: The maximum bundle diameter is 2 inches, appropriate for medium-to-large multi-conductor cable runs.
Q: What mounting hardware is the MLT2H-LPAL compatible with?
A: Panduit lists compatibility with ST2MT, HTMT, and ST3MT cable tie mounts for anchored installations.
Q: What standards does the MLT2H-LPAL meet?
A: The MLT2H-LPAL meets CE, ABS, and LR standards, covering commercial building, marine, and electrical applications.
Q: How many ties come in a package and how many per carton?
A: Each package contains 50 ties. The full carton quantity is 250 pieces.
Q: Is the MLT2H-LPAL made of stainless steel?
A: No. The MLT2H-LPAL is aluminum, not stainless steel. Aluminum is lighter and flexible, making it easier to handle and install. For stainless steel options, look at Panduit's Pan-Steel® product line.
The MLT2H-LPAL stands out in the Pan-Alum line specifically because of its self-locking head — it engages at any point along the tie body, not just the tail end. On a dense 2-inch bundle run inside a commercial panel, that's not a minor convenience; it's the difference between a 10-second cinch and wrestling with the tie from an awkward angle. The 222 lb tensile rating backs up the aluminum construction for anything beyond light-duty wire dress work.
Technical Highlights:
- 222 lb Tensile Strength: Heavy cross-section profile delivers real holding force — enough for multi-conductor power or data bundles under mechanical stress, not just light signal cable dress.
- Self-Locking at Any Position: Head locks anywhere along the 7.9in body, eliminating the need to thread fully before securing. Saves time on repetitive panel builds and in confined enclosure interiors.
- CE / ABS / LR Compliance: Three distinct standards marks — relevant for projects where the authority having jurisdiction (AHJ) or marine classification bodies require documented hardware compliance on cable management components.
Deployment Considerations:
- The 2-inch max bundle diameter is the hard limit — attempting to over-bundle beyond this will stress the locking head and compromise the 222 lb tensile rating. Size your bundle groupings before specifying quantity.
- Aluminum ties are not appropriate in environments with strong galvanic corrosion potential (dissimilar metals in saltwater or chemical exposure) — confirm your environment is within scope for aluminum before substituting Pan-Alum for stainless options.
The MLT2H-LPAL is the right call for commercial electrical panel builds, structured cabling closets, and industrial raceways where a metal tie is required for compliance or durability but stainless steel weight and rigidity would complicate installation. The 50-pack quantity fits a typical single-panel project without over-buying.
