Middle Atlantic MFR 20RU Floor Rack - 27IN Depth - Kensington Maple - This Cost- - MFR-2027E1

Middle Atlantic MFR-2027E1 20RU Mobile Furniture Floor Rack — Kensington Maple

Overview

The Middle Atlantic MFR-2027E1 is a 20-rack-unit open floor rack finished in Kensington Maple wood laminate, built for AV, security control, and network equipment deployments where the rack itself needs to live in a client-facing or semi-finished space. At 27.37 inches deep with a 23.19-inch usable interior depth, it accommodates full-depth gear — NVRs, UPS units, patch panels, and managed switches — without forcing compromise on equipment selection. If you're integrating a network video recorder or similar security appliance into a conference room, executive office, or reception area where an exposed steel rack would be out of place, this is the enclosure to price.

The MFR-2027E1 (often searched as MFR 2027E1) sits within the broader Middle Atlantic rack and enclosure line, which is widely deployed in commercial AV and security integration. The furniture-grade wood cabinet format bridges the gap between data-center-style open frames and finished cabinetry — you get 10-32 threaded rack rails at standard 19-inch EIA spacing with the exterior look of a piece of office furniture.

Key Features

• 20 Rack Units / 35.16 in Usable Height: 20RU provides enough vertical real estate for a full small-to-mid security or AV head-end — NVR, UPS, patch panel, managed switch, and a 1U cable manager — without the rack footprint of a 24 or 27RU unit. The 35.16-inch usable height is the spec to measure against your actual equipment list before ordering.
• 27.37 in Total Depth / 23.19 in Usable Depth: The 23.19-inch usable depth clears full-depth 1U and 2U servers, most NVRs, and standard UPS units. Shallow-depth gear (patch panels, fiber management) installs with room to route cabling neatly behind. Know your deepest piece of equipment before assuming fit — enterprise UPS units can reach 24+ inches and won't fit.
• 250 lb UL Load Capacity: The 250 lb UL-rated load rating means a fully populated rack with a mid-range tower UPS, an NVR, a switch stack, and cabling is well within tolerance. This is a genuine UL-listed load figure, not a claimed static weight — relevant if your project has AHJ sign-off requirements on furniture-grade enclosures.
• 10-32 Rack Rail Threading: Standard 10-32 threaded rails are the dominant rack fastener standard in AV and security hardware. You won't need cage nuts or specialty hardware for most equipment — rack screws drop straight in. Confirm before ordering if you're mixing in server hardware that ships with M6 cage nuts only.
• Kensington Maple Wood Finish: The maple laminate exterior integrates with office and hospitality environments where a painted steel cabinet reads as infrastructure rather than furniture. This is the primary differentiator from Middle Atlantic's steel rack line — you're paying for finished aesthetics, not additional structural performance.
• Monitor Mounting Support: The MFR-2027E1 supports monitor mounting, which matters for security operations positions where a display needs to be co-located with the NVR or control system without adding a separate stand or wall arm. Confirm monitor VESA pattern and weight against Middle Atlantic's accessory specifications before purchasing a monitor mount separately.
• 22.63 in Overall Width / 19 in Panel Width: The 22.63-inch overall width fits through standard 24-inch interior doorways with minimal margin — measure your installation path before delivery, particularly for elevator or corridor constraints. The 19-inch panel width is standard EIA, so no adapter panels are needed for any compliant rack equipment.

Integration & Compatibility

The MFR-2027E1 accepts any rack-mount equipment built to the 19-inch EIA standard with 10-32 rail fasteners. It pairs naturally with Middle Atlantic's own power strips, cable management accessories, and monitor mounts within the MFR furniture line. For security integrations, this rack hosts NVRs, PoE switch stacks, access control servers, and UPS backup power in a single enclosure. If your deployment involves a PoE switch and an NVR feeding a multi-camera system, the 20RU height and 23-inch usable depth handle both without issue. The shipping weight of 121 lbs is the empty rack — factor full-population weight for floor loading and delivery logistics, especially in elevator-access installs.

Frequently Asked Questions

Q: What is the usable rack depth inside the MFR-2027E1?

A: The usable depth is 23.19 inches (58.9 cm). The total external depth is 27.37 inches — the difference accounts for the door, rear panel, and rail structure. Plan your deepest equipment against the 23.19-inch figure.

Q: What is the UL load capacity of the MFR-2027E1?

A: The UL-listed load capacity is 250 lbs (113.4 kg). This is a verified UL figure, not a manufacturer-claimed maximum.

Q: What rack rail thread standard does the MFR-2027E1 use?

A: It uses 10-32 threaded rails, the standard for AV and security rack equipment. Cage nuts are not required for 10-32 hardware.

Q: Will the MFR-2027E1 fit through a standard interior doorway?

A: The overall width is 22.63 inches. Most standard 24-inch interior doorframes will clear it, but measure your installation path — corridors, elevators, and door casings can be the binding constraint on delivery day.

Q: Does the MFR-2027E1 support monitor mounting?

A: Yes, monitor mounting is supported. Verify the specific monitor mount accessory compatibility with Middle Atlantic's MFR accessory line before purchase, as monitor weight limits vary by mount model.

Q: Is the MFR-2027E1 suitable for a client-facing or office environment?

A: Yes — the Kensington Maple wood laminate finish is the reason integrators specify this model over a painted steel rack. It reads as office furniture rather than infrastructure equipment, making it appropriate for reception areas, conference rooms, and executive spaces.

Ted Perry

The MFR-2027E1 comes up on projects where the client has approved the security system budget but hasn't accepted a steel rack in a finished space — the Kensington Maple laminate is what closes that gap. The 23.19-inch usable depth is sufficient for virtually every NVR, UPS, and managed switch combination I've specified in small-to-mid commercial installs, and the 250 lb UL load rating means you're not guessing on structural compliance when an inspector shows up.

Technical Highlights:

• 23.19 in Usable Depth: Clears full-depth 1U NVRs and standard tower-form UPS units racked horizontally without rail extenders — the interior geometry works for real security head-end builds, not just shallow AV gear.
• 250 lb UL Load Capacity: UL-listed, not estimated — relevant when a facilities team or AHJ asks for documentation on furniture-enclosure loading in a finished office floor.
• 10-32 Threaded Rails: No cage nut installation step for standard AV and security hardware. Saves setup time on multi-unit installs and eliminates the common stripped-cage-nut call-back.

Deployment Considerations:

• The 22.63-inch overall width leaves minimal clearance through standard 24-inch door openings — walk the delivery path before the rack ships, especially in elevator buildings with narrow vestibule doors.
• Shipping weight is 121 lbs empty; a fully populated rack with UPS, NVR, and switch stack will exceed 200 lbs — confirm floor loading and coordinate a two-person receive on site.

The MFR-2027E1 is the right spec for hospitality, corporate office, and multi-tenant commercial installs where the security head-end shares a finished equipment room or closet with client-visible spaces and a steel rack would require a separate enclosure surcharge to hide.