APC by Schneider Electric WG6T1200K-SPL3 MGE Galaxy 6000 1200KVA Spare Part Kit Level 3
Overview
The APC by Schneider Electric WG6T1200K-SPL3 is a Level 3 Complete Set spare part kit designed for the MGE Galaxy 6000 Static Bypass Switch (SBS) running at 380–400V, 1200KVA. This kit targets facilities teams and critical infrastructure engineers responsible for maintaining large-scale three-phase UPS installations where unplanned downtime is not an option. Rather than sourcing individual replacement components under pressure during a fault event, the Level 3 kit consolidates the servicing parts you need for a comprehensive maintenance or repair scope into a single procurement — reducing lead time risk when uptime is measured in revenue per minute.
At 1200KVA, the MGE Galaxy 6000 SBS operates in data centers, industrial facilities, and large commercial installations where the electrical infrastructure supports entire server halls or process lines. The WG6T1200K-SPL3 (often searched as WG6T1200K SPL3) is the highest-level spare kit designation in the Galaxy 6000 family, meaning it covers the broadest component scope within the Level 3 classification — appropriate for scheduled major maintenance intervals or post-fault restoration rather than routine filter or battery swaps.
Key Features
- 380–400V Three-Phase Input Compatibility: Matched to the MGE Galaxy 6000 SBS input voltage range used across European and international grid standards — verify your site's nominal voltage before ordering; this kit is not rated for 480V North American configurations.
- 1200KVA SBS Scale: Sized for the top capacity tier of the Galaxy 6000 SBS line. Parts in this kit are dimensioned and rated to the full 1200KVA electrical and thermal load — do not substitute into lower-capacity Galaxy 6000 frames without consulting APC service documentation.
- Level 3 Complete Set: The 'Level 3' designation in APC's Galaxy spare part hierarchy represents a comprehensive scope — more extensive than Level 1 or Level 2 kits — intended for deep-maintenance or full-restoration servicing rather than targeted fault repair.
- Single-SKU Procurement: Consolidating a multi-component spare set under one part number (WG6T1200K-SPL3) simplifies purchase orders, simplifies inventory tracking, and reduces the risk of missing a sub-component during a time-sensitive repair window.
Integration and Compatibility
This spare part kit is specific to the APC MGE Galaxy 6000 SBS platform at the 380–400V, 1200KVA configuration. Compatibility with other Galaxy 6000 frame sizes, voltage ratings, or parallel UPS configurations should be confirmed against APC's Galaxy 6000 service documentation before ordering. For facilities running multiple Galaxy 6000 units in an SBS topology, confirm whether individual unit serial number ranges affect part applicability — APC periodically revises kit contents across production runs.
Frequently Asked Questions
Q: What does 'Level 3 Complete Set' mean for the WG6T1200K-SPL3?
A: In APC's spare part kit hierarchy for the MGE Galaxy 6000, Level 3 represents the most comprehensive scope of replacement components — broader than Level 1 or Level 2 kits. It is intended for major maintenance intervals or full-restoration scenarios rather than targeted single-component repairs.
Q: Is the WG6T1200K-SPL3 compatible with 480V North American electrical installations?
A: No. This kit is rated for the 380–400V input voltage range of the MGE Galaxy 6000 SBS. North American 480V configurations use different Galaxy 6000 variants with separate part numbers.
Q: Can this spare part kit be used across different capacity tiers of the Galaxy 6000?
A: This kit is sized and rated for the 1200KVA configuration. Using components from a 1200KVA kit in a lower-capacity Galaxy 6000 frame is not supported without consulting APC's official service documentation for that frame size.
Q: What is the shipping weight of the WG6T1200K-SPL3?
A: The kit ships at 36.35 lbs. Plan handling and receiving logistics accordingly for a data center or industrial facility receiving dock.
The WG6T1200K-SPL3 is not a device you buy speculatively — it's a procurement decision that belongs in your critical infrastructure maintenance plan before you need it. At 1200KVA, the MGE Galaxy 6000 SBS is protecting electrical loads where a multi-hour parts sourcing delay during a fault event has direct financial and operational consequences. Holding this Level 3 kit on-site or in a regional storeroom changes that calculus.
Technical Highlights:
- 380–400V Voltage Specificity: Matched precisely to the international grid voltage range of the Galaxy 6000 SBS — this is not a universal kit; ordering the wrong voltage variant means parts that physically fit but are electrically mismatched.
- 1200KVA Capacity Tier: Components in this kit are rated to the full thermal and electrical load of the top-tier Galaxy 6000 SBS frame — do not cross-apply to smaller Galaxy 6000 configurations without APC service confirmation.
- Level 3 Scope: The highest spare-kit tier in the Galaxy 6000 hierarchy, covering the broadest component set — appropriate for scheduled major service intervals, not routine consumable replacement.
Deployment Considerations:
- Confirm the exact production run and serial number range of your installed Galaxy 6000 SBS units against APC's service documentation — kit contents can vary across manufacturing revisions even within the same part number.
- At 36.35 lbs, this kit requires standard freight handling; verify your facility's receiving dock can accept the shipment format before placing the order, especially for raised-floor data center environments with restricted access.
The WG6T1200K-SPL3 is the right procurement for facilities teams managing 1200KVA Galaxy 6000 SBS installations on a formal preventive maintenance schedule — particularly in co-location data centers, large industrial process environments, or critical infrastructure sites where APC factory service visits are planned at defined intervals.
