Lifesafety Power FPO150-2D8PE6M1 150W Single Voltage Power Supply
Overview
The FPO150-2D8PE6M1 is a 150W single voltage power supply operating at 120 VAC input, designed to distribute 24 VDC auxiliary power across networked surveillance, access control, and security systems. With 16 auxiliary outputs, this unit consolidates power distribution for multiple IP cameras, readers, intercoms, and edge devices in distributed deployments where rack space or cabinet real estate is tight. Use this when a centralized supply is more practical than dedicated supplies at each device endpoint.
Compatibility
The FPO150-2D8PE6M1 integrates with surveillance systems requiring 24 VDC auxiliary power distribution. Compatible with standard IP camera installations (Axis, Hikvision, Pelco, and other vendors that accept 24 VDC auxiliary power), access control panels drawing 24 VDC, PoE+ injectors, intercom systems, and outdoor environmental sensors. Verify exact current requirements for each connected device—total draw across all 16 outputs must not exceed the supply's 150W capacity (approximately 6.25A per output when fully distributed). Confirm pinout compatibility with your specific reader or device before deployment.
Installation Notes
Input: 120 VAC, 50/60 Hz. Output: 24 VDC via 16 auxiliary channels. Mount in a climate-controlled enclosure or cabinet away from direct moisture and high ambient temperatures. Verify that input voltage remains within ±10% of nominal 120 VAC to avoid output instability or device malfunction. Use appropriate gauge cabling from supply to each auxiliary terminal—oversizing by one AWG is prudent for runs over 50 feet to minimize voltage sag. Do not bundle high-current auxiliary lines with low-signal lines (network, audio, data) to avoid cross-talk. Ensure adequate ventilation if mounting in sealed cabinets.
