Lenovo 4XF7A97370 Thinksystem Toolless Slide Rail KIT V4

Lenovo 4XF7A97370 ThinkSystem Toolless Slide Rail Kit V4

Overview

The Lenovo 4XF7A97370 is a toolless slide rail kit designed for mounting ThinkSystem servers into standard EIA-310 equipment racks. The V4 designation indicates this is a fourth-generation rail design, supporting tool-free installation — no screws, no cage nuts, no extra hardware to source separately. If you're racking ThinkSystem 1U or 2U nodes in a datacenter or server room and need to avoid time-consuming traditional rail installs, 4XF7A97370 removes that friction. At 10 lb, it's a standard-weight slide rail assembly suited for commercial rack deployments. Manufactured in Mexico and sourced factory-new.

Compatibility

This rail kit is designed for the Lenovo ThinkSystem server line. Toolless V4 rail kits typically support ThinkSystem rack servers deployed in standard EIA-310-compliant 4-post server racks with rail depths accommodating typical 600mm–900mm rack enclosures. Verify your specific ThinkSystem server model against Lenovo's rail compatibility matrix before ordering — ThinkSystem ST (tower), SR (rack), and SD (dense) form factors each have distinct rail SKUs, and not all V4 rails are cross-compatible across generations. Consult the rack mounting solutions category for complementary hardware including cable management arms and rack PDUs. If you're deploying ThinkSystem nodes alongside network switches or storage enclosures in the same rack, confirm uniform rail depth compatibility across all chassis before procurement.

Installation Notes

Toolless design means the rails clip directly into standard square-hole or round-hole rack posts without tools or cage nuts — reducing per-node install time significantly versus screwed rail kits. Ensure rack post hole spacing matches the rail's clip geometry before committing. V4 rail kits do not require a cable management arm (CMA) to function, but if a CMA is part of your deployment, verify the 4XF7A97370 is CMA-compatible for your specific server model. Weight capacity and maximum server depth should be confirmed against the server's published specs prior to installation.