Lenovo 4X97A87137 SR630 V3 Internal RAID Adapter Cable KIT

Lenovo 4X97A87137 SR630 V3 Internal RAID Adapter Cable Kit

Overview

The Lenovo 4X97A87137 is an internal cable kit designed to connect RAID adapters within ThinkSystem SR630 V3 servers. If you're adding or replacing a RAID adapter in an SR630 V3 and the correct internal signal cables weren't included with your adapter, this kit supplies the missing link between the adapter and the server's backplane — eliminating the guesswork of sourcing compatible cables separately. At 0.65 lb and a flat 17.00 x 11.00 x 0.50 in profile, the kit ships as a compact, ready-to-install bundle sized for tool-bay installation inside a 1U chassis.

Compatibility

This cable kit is specific to the Lenovo ThinkSystem SR630 V3 server platform. It is not a universal RAID cable — pairing it with earlier SR630 generations (V1, V2) or other ThinkSystem 1U models such as the SR650 V3 is not confirmed by available evidence. Verify against your SR630 V3 configuration guide before ordering. For broader server storage cable requirements across the ThinkSystem line, confirm compatibility per the Lenovo ServerProven or the SR630 V3 maintenance manual for your specific backplane and RAID adapter combination.

Installation Notes

Route cables according to the SR630 V3 internal cable routing diagram in the server's hardware maintenance manual — incorrect routing in a 1U chassis can obstruct airflow and cause thermal issues. The flat form factor (0.50 in depth) is intentional for tight 1U cable management; avoid sharp bends that could stress connector pins. No special tools are specified in available evidence, but standard server-grade cable management best practices apply: secure with the provided retention points and confirm connector seating before powering the system.