Lenovo 4X97A87067 SR650 V3 EIA Latch with VGA Port

Lenovo 4X97A87067 SR650 V3 EIA Latch with VGA Port

Overview

The Lenovo 4X97A87067 is a factory-new EIA rack latch assembly with an integrated VGA port, designed specifically for the Lenovo ThinkSystem SR650 V3 server platform. If you are retrofitting, replacing a damaged latch, or configuring a new SR650 V3 with local video output at the front panel, this is the correct Lenovo-sourced component to order — not a universal fit part. The VGA integration means you retain direct console access to the server without routing to a separate KVM or rear-panel connector, which matters in high-density rack environments where front-panel serviceability is a priority.

Weighing 10 lb and manufactured in Mexico, the 4X97A87067 ships as a genuine Lenovo replacement and configuration component classified under UNSPSC 43211600 (computer equipment). It is procured through channel-direct sourcing — no grey-market, no parallel imports.

Key Features

• SR650 V3 Platform Fit: Engineered specifically for the ThinkSystem SR650 V3 chassis — not a cross-generation or universal part. Ordering the correct latch matters because SR650 V3 uses an updated front-panel rail and connector layout versus prior SR650 generations. Using the wrong latch risks mechanical misalignment or lost VGA signal continuity.
• Integrated VGA Port: Front-panel VGA access lets technicians connect a local monitor directly at the rack face during initial BIOS configuration, firmware updates, or OS troubleshooting — without needing to pull the server or access the rear panel in a densely cabled rack environment.
• EIA Standard Form Factor: The EIA (Electronic Industries Alliance) latch format is consistent with standard 19-inch rack deployments, maintaining compatibility with EIA-310-compliant racks and rail kits used in most commercial data center and server room installations.
• Genuine Lenovo Component: Sourced as a genuine Lenovo part — not an aftermarket substitute. For SR650 V3 deployments under active Lenovo warranty or support contracts, using genuine components helps preserve service eligibility.
• 10 lb Shipping Weight: At 10 lb, factor this into rack service kits when ordering multiple replacement components for a data center refresh — not a heavy field install, but worth noting for consolidated shipments.

Integration and Compatibility

The 4X97A87067 is confirmed compatible with the Lenovo ThinkSystem SR650 V3 platform. It is not confirmed compatible with SR650 (Gen 1), SR650 V2, or other ThinkSystem models — do not assume cross-generation fit without verifying the Lenovo parts matrix for your chassis serial range. If you are managing a mixed fleet of SR650 generations across a data center infrastructure, verify the specific chassis generation before ordering. For organizations standardizing on SR650 V3 nodes in high-availability clusters, keeping a spare 4X97A87067 on the shelf reduces front-panel serviceability downtime from a latch or VGA port failure.

Frequently Asked Questions

Q: Which server is the Lenovo 4X97A87067 compatible with?

A: The 4X97A87067 is designed for the Lenovo ThinkSystem SR650 V3 server. It is not confirmed compatible with SR650 Gen 1 or SR650 V2 — verify your chassis generation before ordering.

Q: Does the 4X97A87067 include a VGA port?

A: Yes. The assembly includes an integrated VGA port on the front-panel latch, enabling direct local monitor connection at the rack face without accessing the rear panel.

Q: What does EIA latch mean for rack compatibility?

A: EIA refers to the Electronic Industries Alliance standard form factor. This latch is designed for use in standard 19-inch EIA-310-compliant rack enclosures common in commercial data center and server room deployments.

Q: Where is the Lenovo 4X97A87067 manufactured?

A: The 4X97A87067 is manufactured in Mexico (Country of Origin: MX) and is a genuine Lenovo factory component sourced through channel-direct distribution.

Q: Is this a compatible aftermarket part or a genuine Lenovo component?

A: This is a genuine Lenovo part, not an aftermarket substitute. It is sourced factory-new through channel-direct distribution with no grey-market or parallel import risk.

Karl Wilson

The 4X97A87067 is a purpose-built front-panel component — the kind of part that gets overlooked until a latch breaks or a technician needs front VGA access in a pinch. At 10 lb shipped, it is a straightforward stocking item for SR650 V3 deployments, and the integrated VGA port is the detail that separates this latch from a generic mechanical replacement.

Technical Highlights:

• VGA Integration: Front-panel VGA on the latch assembly means you do not need to route a separate video cable to the rear when performing BIOS-level work or OS recovery at the rack face — a real time-saver in high-density rows.
• SR650 V3 Specificity: This part number is generation-locked to the SR650 V3. The SR650 platform spans multiple generations with distinct front-panel geometries — ordering a prior-generation latch will not mechanically fit or connect correctly.
• Genuine Sourcing: Factory-new, channel-direct — relevant if the server is under a Lenovo warranty or support contract where component authenticity can affect service eligibility.

Deployment Considerations:

• Confirm your SR650 chassis is specifically V3 (not V2 or Gen 1) before ordering — the part number is not backward-compatible and Lenovo does not publish a universal latch for the SR650 family.
• If front-panel VGA is not a requirement for your deployment (e.g., fully managed via iDRAC/XCC remote console), evaluate whether a standard latch without VGA integration meets your needs — this assembly carries the VGA interface regardless of whether it is used.

The 4X97A87067 is the correct order for SR650 V3 deployments in data center environments where front-panel local console access is part of the standard break-fix or commissioning workflow — particularly relevant in colocation facilities where rear-panel access is constrained by dense cabling.