Lenovo 4X97A86320 SR635 V3 2.5R SAS CA KIT

Lenovo 4X97A86320 SR635 V3 2.5-Inch SAS Cable Assembly Kit

Overview

The Lenovo 4X97A86320 is a SAS cable assembly kit designed specifically for the ThinkSystem SR635 V3 server configured with 2.5-inch drive bays. When expanding or servicing an SR635 V3's internal storage subsystem, the correct cable routing hardware is non-negotiable — mismatched cables introduce signal integrity issues and may prevent the backplane from being detected by the RAID controller entirely. The 4X97A86320 provides the factory-correct SAS interconnect for this chassis and drive configuration, ensuring the storage path between the backplane and controller meets Lenovo's validated design.

Compatibility

This kit is designed for use with the Lenovo ThinkSystem SR635 V3 in its 2.5-inch small form factor drive bay configuration. If your SR635 V3 is configured for 3.5-inch large form factor drives, this kit does not apply — verify your chassis bay specification before ordering. Compatibility with SR635 non-V3 generations or other ThinkSystem rack platforms (SR650, SR630, SR645) is not confirmed by available evidence; consult Lenovo's official option compatibility matrix for those systems.

Installation Notes

This is a server internal cable kit intended for installation inside the SR635 V3 chassis. Work should be performed with the server powered down and disconnected from AC. SAS signal cables are keyed and directional — route according to Lenovo's internal cabling guide for the SR635 V3 to avoid backplane connector stress. The 10 lb kit weight reflects the full assembly; handle with care to avoid connector damage prior to installation. Country of origin is Mexico.