Lenovo 4X97A59799 Thinksystem SR630 V2 4X2.5IN Sas/sata Backplane Cable KIT

Lenovo 4X97A59799 ThinkSystem SR630 V2 4x2.5-Inch SAS/SATA Backplane Cable Kit

Overview

The Lenovo 4X97A59799 is the OEM backplane cable kit designed for the ThinkSystem SR630 V2 server's 4x2.5-inch SAS/SATA drive bay configuration. When expanding storage or replacing damaged cabling in an SR630 V2, using the correct factory cable assembly is the only way to guarantee signal integrity and maintain proper backplane-to-controller routing — third-party cables risk connector incompatibility and void system certification. This kit ships from Mexico (MX) as a genuine Lenovo component.

Compatibility

Designed specifically for the Lenovo ThinkSystem SR630 V2 rack server in the 4x2.5-inch drive bay configuration. The SAS/SATA dual-interface design supports both SAS and SATA drive types on the same backplane, giving you flexibility to mix drive protocols within the bay without additional adapters. This cable kit is not cross-compatible with SR630 V1, SR650, or other ThinkSystem rack server chassis — confirm your chassis generation and bay configuration before ordering. UNSPSC code 43211600 classifies this as a server storage accessory component.

Installation Notes

Route and seat connectors fully before powering the system — partial seating on SAS/SATA backplane headers is a common source of drive detection failures. Verify the bay count and backplane revision on your SR630 V2 matches the 4x2.5-inch specification this kit targets; SR630 V2 configurations with 8x2.5-inch or 10x2.5-inch bays require different cable assemblies. At 10 lb shipping weight, the kit includes the cable assembly and any retention hardware sized to the SR630 V2 chassis — no field fabrication required.