Middle Atlantic L5 Finishing KIT 43W Turret HPL B3 - L5KCB2SEHB300518

Middle Atlantic L5KCB2SEHB300518 L5 Series Finishing Kit — 43W Turret, HPL B3

Overview

The Middle Atlantic L5KCB2SEHB300518 is a cosmetic finishing kit for the L5 series rack enclosure system, delivering a furniture-grade exterior on installations where the rack is visible — boardrooms, executive briefing centers, broadcast studios, and high-end control rooms. The kit covers the structural frame with High Pressure Laminate (HPL) panels in the B3 finish, replacing the utilitarian look of an open rack with a polished, custom-cabinet appearance. The turret-style top cap is included, completing the crown of the enclosure with the same HPL B3 surface. Specifying the correct finishing kit up front eliminates the common field problem of mismatched panel dimensions — this SKU, L5KCB2SEHB300518, is sized for the 43W configuration.

Compatibility

Designed for Middle Atlantic L5 series freestanding rack enclosures in the 43W width class. Finishing kits in the L5 line are dimension-specific — width, depth, and height must all match the underlying structural frame. The 43W designation narrows compatibility to the corresponding L5 43-wide frames; verify your frame's depth and height codes against this SKU before ordering. HPL B3 is a specific laminate color from Middle Atlantic's standard palette; confirm the finish code matches your existing or planned enclosure panels if this kit is part of a multi-bay installation where color consistency matters. This kit is not compatible with rack enclosures outside the L5 series, nor with Middle Atlantic's WRK, BGR, or other non-L5 frame families.

Installation Notes

Finishing kit panels are applied over the structural L5 frame after rack equipment is installed and cabled. HPL panels attach to the frame's pre-drilled points — no cutting or custom fabrication required when the kit SKU matches the frame. Confirm panel attachment method (clip vs. screw) with the frame's installation guide. For multi-bay configurations, install adjacent frame finishing kits before securing turret caps to maintain alignment across the bay run.