Panduit SKPPA24BL Shielded Keystone Angled 24-Port Patch Panel, 1RU, Black

Overview

The Panduit SKPPA24BL is a 1RU shielded keystone patch panel built for structured cabling installations that demand clean cable management and STP integrity in 19-inch rack environments. It accepts up to 24 shielded keystone jack modules in a single rack unit — keeping your STP/FTP runs properly terminated and grounded without consuming extra rack space. The angled front design separates cable paths visually and physically, which matters in dense IDF closets where mis-patching is a recurring problem. If you are building or expanding a Panduit copper cabling infrastructure, this panel slots directly into that ecosystem.

Key Features

• 24-Port Shielded Keystone Capacity in 1RU: Fits a full 24-port patch run in one rack unit. On a 12U or 16U wall-mount cabinet, that density difference versus a fixed-port panel matters — you keep horizontal space for patch cables and switches without stacking panels.
• Angled Faceplate Design: The angled module orientation routes patch cords naturally toward the sides of the rack, reducing cable stress at the RJ-45 connector. On high-density rows, this keeps your patch panel bay readable at a glance — port IDs stay visible even when cords are plugged in.
• Stainless Steel Construction: The panel body is stainless steel, not stamped aluminum. That translates to a chassis that does not flex under cable weight, which is important once 24 STP patch cords are loaded — those cables are heavier and stiffer than UTP, and a flimsy panel body will shift module alignment over time.
• Grounding Lug Included: STP termination is only effective if the shield is actually grounded. The built-in grounding lug gives you a direct path to rack ground without improvising a solution. Miss this step and you have impedance mismatch and noise pickup — the grounding lug is not optional on STP runs.
• Label Pockets with Pre-Printed Labels and Covers: Front faceplates include label pockets, pre-printed labels, and label covers. In a live environment, unlabeled ports cost time during troubleshooting. Having the labeling system built in at termination means there is no excuse to skip it.
• Standard 19-Inch Rack Mount: 19 inches wide (482.6 mm) and 1.72 inches (43.7 mm) tall — fits any standard EIA-310 two-post or four-post rack or cabinet without adapters.
• Module-Flush Front Faceplates: Keystone modules mount flush with the panel face, so SFP dust caps and boot protectors seat correctly. Recessed or protruding modules are a minor nuisance that compounds across 24 ports.

Integration and Compatibility

The SKPPA24BL accepts Panduit shielded keystone jack modules — pair it with the appropriate Cat6A or Cat6 shielded jacks from the Panduit copper systems line to complete a end-to-end shielded channel. The 19-inch form factor and standard 1RU height make it compatible with any EIA-310 compliant rack or wall-mount cabinet. For PoE switch deployments feeding IP cameras or access control readers, route STP runs through this panel and pair with a PoE switch to maintain shield continuity from closet to device. The grounding lug requires a bonding conductor run to the rack's ground bar — consult your facility's grounding scheme before termination.

Frequently Asked Questions

Q: How many keystone modules does the SKPPA24BL accept?

A: The SKPPA24BL accepts up to 24 shielded keystone jack modules in a single 1RU footprint.

Q: Does the SKPPA24BL include keystone modules?

A: No. The SKPPA24BL is sold as a panel only (package quantity 1). Shielded keystone jack modules are purchased separately.

Q: What rack size does the SKPPA24BL fit?

A: It fits standard 19-inch (482.6 mm) EIA-310 racks and cabinets. Height is 1RU (1.72 inches / 43.7 mm).

Q: Does the SKPPA24BL support grounding for shielded cabling?

A: Yes. The panel includes a grounding lug that provides a direct path to rack ground — essential for maintaining STP shield continuity and avoiding noise pickup.

Q: What material is the SKPPA24BL chassis made from?

A: The panel body is stainless steel, which resists flex under the added weight of loaded STP patch cords.

Q: Are labels included with the SKPPA24BL?

A: Yes. The front faceplates include label pockets, pre-printed labels, and label covers — no separate labeling kit required at installation.

Eden Phillips

The detail that often gets skipped on STP patch panels is the grounding lug — and the SKPPA24BL has one built in. On the SKPPA24BL, the stainless steel body combined with the grounding lug means you can actually complete a compliant shielded channel termination without sourcing additional hardware. That matters in environments where the STP investment was made precisely to reject EMI, but poor termination practices at the panel end up defeating the shielding entirely.

Technical Highlights:

• 24 Shielded Ports, 1RU: Full 24-port density in 43.7 mm of rack height — on a 12U wall cabinet, that is a meaningful space savings versus spreading terminations across two panels or a larger chassis.
• Angled Module Design: Patch cord exit angle reduces pull stress at RJ-45 connectors — an underrated durability factor when STP patch cords (stiffer and heavier than UTP) are loaded 24-deep and re-patched repeatedly over the life of the installation.
• Stainless Steel Body: Does not flex under cable load the way stamped aluminum panels do. Once you load 24 STP cords, panel rigidity directly affects module alignment and long-term termination quality.

Deployment Considerations:

• Keystone modules are NOT included — budget and order shielded keystone jacks separately before scheduling termination day. Running out of modules mid-punch is a preventable delay.
• The grounding lug requires a bonding conductor run to your rack's ground bar. If your rack lacks a ground bar or your facility grounding scheme is not documented, resolve that before termination — a floating shield causes more noise problems than no shield at all.

Best fit for IDF closets or server room patch fields in manufacturing, healthcare, or education environments where Cat6A STP runs are required for EMI compliance — specifically where dense 19-inch rack buildouts need every RU to count.