International Connectors and Cable ICFOJ1G701 10G Fiber Optic Jumper

Overview

The International Connectors and Cable ICFOJ1G701 is a 1-meter, duplex LC-to-LC fiber optic jumper designed for 10 Gigabit Ethernet (10GbE) applications. This cable is essential for establishing reliable, high-speed data links between network devices such as switches, routers, and network interface cards (NICs) in enterprise and data center environments. Its 50/125 micron multimode fiber construction supports the bandwidth requirements for 10GbE transmission over shorter distances, ensuring efficient data transfer without signal degradation. The duplex configuration allows for simultaneous transmit and receive operations, a standard requirement for most network protocols.

Compatibility

This jumper is compatible with any network equipment featuring standard LC duplex fiber optic connectors. It is suitable for use with 10GbE SFP+ transceivers and network devices that support 50/125 micron multimode fiber, including but not limited to: Cisco Nexus switches, Arista Networks switches, Juniper Networks routers, HPE ProLiant servers, Dell PowerEdge servers, and any other enterprise-grade networking hardware utilizing LC duplex interfaces for 10GbE connectivity.

Installation Notes

Ensure connectors are clean before insertion to prevent performance degradation and potential damage. Use an appropriate fiber optic cleaning tool. Avoid sharp bends that exceed the minimum bend radius (typically 1 inch or 2.5 cm for 50/125 micron fiber) to maintain signal integrity. The cable is rated for indoor use and should be protected from excessive dust, moisture, and physical abrasion.