Compulocks 209SWLW iPad 10th/11th Gen (A16) Swell Enclosure Wall Mount — White
Overview
The Compulocks 209SWLW is a wall-mount enclosure from the Swell series, purpose-built to permanently install an iPad 10th- or 11th-generation (A16 chipset) as a fixed-display kiosk, digital signage panel, or interactive terminal. The enclosure holds the tablet flush against the wall with a clean front face — the right choice when you need the iPad locked in place with no exposed mounting hardware and no risk of removal without tools. The 209SWLW ships in white to match light-colored interior environments such as lobbies, reception desks, retail walls, and conference room AV alcoves.
Compatibility
Designed specifically for the Apple iPad 10th-generation and iPad 11th-generation models that use the A16 chip. These are the standard full-size iPad models — not iPad Pro, iPad Air, or iPad mini. Confirm your iPad generation and chip designation (A16) before ordering; Compulocks produces separate enclosures for iPad Pro 11-inch, iPad Air, and prior iPad generations, and those housings are not interchangeable with the 209SWLW. The white colorway is the primary differentiator from the equivalent black variant; both share the same Swell mechanical interface. Mount surface must support standard drywall or hard-wall anchoring appropriate for the combined weight of the enclosure and tablet.
Installation Notes
Wall-mount installations should be planned to route the iPad's charging cable before the unit is secured — once locked, access to the Lightning or USB-C port depends on the enclosure's cable-pass-through design. Confirm the wall surface type and load rating before selecting anchors. As with all tablet enclosures in fixed-display deployments, orient the cable entry point away from high-traffic areas to reduce wear on the connector.
