Dome Cameras
Showing Results for Dome Cameras
-
Speco Technologies
SKU: O8VD3
Speco Technologies O8VD3 8MP H.265 IP Dome Camera
8MP dome with H.265 codec and IR night vision, NDAA compliant
- 8MP 3840×2160 resolution delivers forensic-grade detail for identification and evidence.
- H.265 compression cuts bandwidth and storage roughly 50% versus H.264 at equal quality.
- NDAA Section 889 compliant; operates from -40°F to 140°F across indoor and outdoor sites.
$425.95 $197.99 Save $227.96 -
Speco Technologies
SKU: V5D2
Speco Technologies V5D2 5MP HD-TVI Dome Camera
5MP fixed dome with IP67/IK10 rating for outdoor perimeter monitoring
- 5MP 2592×1944 sensor captures facial and plate detail at 20fps for investigative review.
- IP67 weatherproofing and IK10 vandal resistance eliminate need for separate protective housing.
- ONVIF Profile I compatibility ensures integration with standard DVR/NVR recording platforms.
$266.50 $102.99 Save $163.51 -
Speco Technologies
SKU: V5D2M
Speco Technologies V5D2M 5MP HD-TVI Dome Camera
5MP motorized dome with IP67/IK10 rating for outdoor surveillance
- 5MP (2592×1944) HD-TVI output delivers facial and plate detail over coax.
- IP67/IK10 rated housing withstands rain, dust, and vandal impact outdoors.
- Motorized 2.8–12mm varifocal lens allows remote reframe without site visits.
$285.60 $157.99 Save $127.61 -
Speco Technologies
SKU: VLD10
Speco Technologies VLD10 2MP HD-TVI Dome Camera with IR
2MP HD-TVI dome with 65ft IR and IK10 vandal rating
- IP67 and IK10 ratings protect against full dust ingress, water jets, and direct impact.
- 65ft IR illumination enables reliable 24/7 outdoor coverage without auxiliary lighting.
- 1920x1080 at 30fps on a 1/2.8" CMOS sensor keeps per-camera storage demand low at 2MP.
$177.30 $97.99 Save $79.31 -
Speco Technologies
SKU: VLD9M
Speco Technologies VLD9M 2MP HD-TVI IR Motorized Dome Camera
2MP HD-TVI motorized dome with IR for outdoor harsh environments
- 1920×1080 at 30 fps over coax—no Ethernet runs needed in retrofit deployments.
- IP67 and IK10 ratings handle direct rain exposure and 20-joule vandal impacts.
- Operates from -22°F to 122°F, covering extreme climates without added thermal gear.
$301.70 $166.99 Save $134.71 -
Speco Technologies
SKU: V5D1M
Speco V5D1M 5MP HD-TVI Dome Camera IR 2.8-12mm
5MP HD-TVI dome with motorized lens and IK10 vandal rating
- 5MP at 2592×1944 delivers high-detail coverage over HD-TVI without IP infrastructure.
- IP67 and IK10 ratings handle outdoor exposure and moderate physical impact at entry points.
- Motorized 2.8–12mm varifocal lens reduces fixed-lens SKU count across mixed deployments.
$127.99 -
Speco Technologies
SKU: VL644T
Speco VL644T 2MP HD-TVI Indoor Dome 3.6mm
2MP HD-TVI indoor dome with 3.6mm fixed lens and 12VDC power
- Delivers 1920×1080 HD-TVI video over existing coax, eliminating cable replacement costs.
- ONVIF Profile I compatibility enables protocol-level integration with supported VMS platforms.
- At 10.5 oz with 12VDC power, installs easily on standard ceiling or wall junction boxes.
$92.05 $50.99 Save $41.06 -
Speco Technologies
SKU: VLD5
Speco VLD5 2MP HD-TVI Vandal Dome Camera
2MP outdoor dome with IK10 vandal protection and IP67 sealing
- 1920×1080 at 30fps on a 1/2.8" CMOS sensor delivers clear perimeter coverage.
- IK10 impact resistance and IP67 sealing handle vandalism and harsh weather.
- Included junction box reduces field connections and speeds outdoor dome installs.
$210.50 $81.99 Save $128.51 -
Speco Technologies
SKU: VLT4DG
Speco VLT4DG 4MP HD-TVI Dome Camera IR 2.8mm
4MP HD-TVI dome with IR night vision for fixed surveillance
- 4MP HD-TVI output integrates with existing TVI DVRs and hybrid systems.
- IR capability supports reliable low-light and nighttime fixed coverage.
- Included junction box reduces field assembly time and aids weatherproofing.
$145.99 -
Speco Technologies
SKU: ZIPL88D2
Speco ZIPL88D2 8-Channel IP Dome Kit 2TB
8-channel IP dome kit with 2TB storage and PoE power
- Bundles 8 IP dome cameras with 2TB storage, eliminating separate component sourcing.
- Turnkey kit reduces SKU complexity and compresses order-to-deployment timelines.
- 3-year warranty backs the full kit, simplifying support coverage for integrators.
$3,914.50 $1,511.99 Save $2,402.51 -
TP-Link
SKU: INSIGHT S245ZI
TP-Link INSIGHT S245ZI VIGI 4MP Motorized Varifocal Dome Camera
- 4MP motorized varifocal dome camera with remote zoom
- Solves field-of-view trade-offs at install time
- Indoor and light outdoor mounting flexibility
$299.00 $137.99 Save $161.01 -
Ubiquiti
SKU: UACC-DOME-FM-B
Ubiquiti UACC-DOME-FM-B Dome camera mounting accessory
Recessed dome mount for AI cameras in walls and ceilings
- Flush-mounts UVC-AI-Dome-B and UVC-AI-Dome-W into walls or ceilings recessed.
- Reduces camera protrusion for low-profile deployments in offices and retail spaces.
- Fits standard wall and ceiling cavities for new construction and retrofit installs.
$39.00 $38.99 Save $0.01 -
Ubiquiti
SKU: UACC-DOME-FM-W
Ubiquiti UACC-DOME-FM-W Dome camera mounting accessory, recessed
Recessed dome mount for clean wall and ceiling integration
- Recessed mount eliminates surface brackets, reducing snag hazards in high-traffic corridors.
- Supports wall and ceiling installation for flexible placement in drop-tile or drywall surfaces.
- White finish integrates cleanly into standard ceiling and wall finishes without visible hardware.
$39.00 $38.99 Save $0.01 -
Ubiquiti
SKU: UACC-DOME-WS-W
Ubiquiti UACC-DOME-WS-W Dome Camera Mounting Accessory
Weather-sealed white dome enclosure for wall and pole camera mounts
- Weather-sealed dome camera mounting accessory
- Protects from direct rain and wind-driven moisture
- Extends camera life in coastal and humid sites
$29.00 $28.99 Save $0.01 -
Ubiquiti
SKU: UACC-G6-DOME-FM-W
Ubiquiti UACC-G6-DOME-FM-W G6/G6 Pro Dome camera mounting
Flush recessed mount for UniFi G6/G6 Pro dome cameras
- Flush-mount white bracket for Ubiquiti G6 and G6 Pro dome cameras
- Recessed mount for clean architectural ceiling install
- OEM Ubiquiti mounting hardware preserves UniFi camera warranty
$39.00 $38.99 Save $0.01 -
Ubiquiti
SKU: UACC-G6-DOME-WS-B
Ubiquiti UACC-G6-DOME-WS-B G6 Dome camera accessory, wall/pole,
Wall and pole mount accessory for Ubiquiti G6 Dome cameras
- Rated for outdoor use, shielding G6 Dome optics from rain, UV, and dust.
- Supports wall and pole mounting to fit varied structural deployment scenarios.
- Passive accessory — no power or network connections required for installation.
$29.00 $28.99 Save $0.01
Dome Cameras
IP dome cameras for indoor and outdoor surveillance where discreet aesthetics and vandal resistance are priorities. IK10-rated polycarbonate domes, flush-mount and pendant options, and integrated IR deliver reliable coverage in retail, office, and public-facing environments.
Plan Your Deployment
- Select IK10 vandal-rated dome for public-accessible or tamper-prone mounting locations
- Specify WDR rating for mixed-lighting environments such as lobbies and storefronts
- Choose flush-mount, surface-mount, or pendant-mount based on ceiling type and aesthetic
- Evaluate motorized varifocal lens for remote focus adjustment after installation
- Confirm IR range and low-light performance for overnight surveillance requirements
Dome Cameras — Engineering-Grade IP Surveillance for Commercial Deployments
This category covers 449 working models of dome cameras sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Resolution drives both image utility and bandwidth budget. 2MP and 4MP cameras cover most general-purpose surveillance at modest storage cost; 8MP and higher resolutions trade bandwidth for forensic detail useful when you need to identify faces or read plates at distance. Decide the minimum pixel density required at your scene's farthest target — most face-identification work needs 80 pixels per foot of subject — before locking in lens focal length and sensor count.
Low-light performance matters more than raw resolution in most real deployments. Sensor size, lens aperture, IR cut-filter behavior, and starlight-class technologies (Ambarella, Sony Starvis, Hanwha Wisenet X) determine whether your camera produces a usable image at 2 AM in a poorly-lit lot. Confirm minimum illumination figures at color and B/W modes — and read the test methodology, not just the headline lux number.
Compatibility with your video management software (VMS) is non-negotiable. ONVIF Profile S/T conformance is the baseline; verify the specific camera firmware against your VMS integration matrix before ordering. Edge analytics — object classification, line crossing, intrusion detection — often require manufacturer-native integration rather than ONVIF passthrough, which limits which cameras pair with which recorders.
Total cost of ownership extends well beyond unit price. Plan for installation labor (mast, conduit, PoE switch capacity), storage growth from higher-resolution streams, and warranty/service horizons. Cameras with 5-year warranties and free firmware updates almost always outlast cheaper alternatives that hit end-of-life within three years and force a refresh just as the surrounding system stabilizes.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, 8MP, 5MP, 6MP, Thermal, 20MP+, 12MP |
| IP Rating | IP66, IP67, IK10, IP42, IP52, IPX4, IK08 |
| Connectivity | Wired, Wi-Fi |
| Power | PoE, PoE+, AC/DC, PoE++ |
| Channels | 20, 6, 2, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
What resolution do I need for license plate capture?
For dependable license plate recognition at 25-30 mph, plan for 80-100 pixels per foot at the plate, which usually means a dedicated LPR camera with a long focal length and short shutter speed. General-purpose 4MP cameras can read plates only at close range and low vehicle speed. Combine an LPR-specific camera at chokepoints with overview cameras covering wider context for full coverage.
Do I need NDAA-compliant cameras?
If you sell to U.S. federal agencies, federally-funded projects, or many state and local government customers, yes — Section 889 of the NDAA bans Hikvision, Dahua, Huawei, and several other manufacturers from those installations. We carry NDAA-compliant lines from Axis, Hanwha, i-PRO, Pelco, Vivotek, and Bosch. Commercial private-sector buyers face no federal restriction but may inherit one through a customer's procurement rules.
What's the difference between PoE, PoE+, and PoE++?
PoE (802.3af) supplies up to 15.4W and powers most fixed-lens cameras. PoE+ (802.3at) goes to 30W and is the default for heated outdoor housings, PTZs, and motorized-zoom optics. PoE++ (802.3bt) reaches 60-90W and is required for large outdoor PTZs, multi-imager cameras with built-in IR, and accessories with integrated heaters and wipers. Always confirm the camera's PoE class against your switch budget per port.
How long do I need to retain video?
Storage retention is driven by regulation, insurance, or operational policy. Cannabis, banking, and gaming often require 30-90 days; most commercial buildings retain 14-30 days. Calculate storage as resolution × frame rate × compression × camera count × retention days. H.265 cuts the load roughly in half versus H.264 with comparable image quality. Build in 20% headroom for events that trigger higher-bitrate recording.
Can I mix camera brands on one recorder?
You can, but you give up edge analytics and convenience features tied to manufacturer-native integration. ONVIF Profile S/T provides basic streaming, PTZ control, and event subscription across brands, but advanced AI classification and per-stream metadata typically require same-brand camera and VMS. For deployments where you're standardizing, pick one VMS and align cameras to its supported list rather than mix arbitrarily.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.