ACTi Interior Fixed Dome Active - ACS-ICB-ADU-BOSCH-PB-NDM7703AL

ACTi ACS-ICB-ADU-BOSCH-PB-NDM7703AL Interior Fixed Dome Active

Overview

The ACTi ACS-ICB-ADU-BOSCH-PB-NDM7703AL is an interior fixed dome active housing designed to integrate Bosch cameras into ACTi surveillance systems. This unit bridges incompatible camera families, allowing you to standardize on a single VMS and NVR platform while deploying cameras from different manufacturers across your facility. Deploy this when facility constraints or existing equipment lock you into a multi-vendor environment and you need centralized management without replacing working cameras.

Compatibility

This housing is engineered for Bosch camera integration into ACTi-based deployments. Confirm your specific Bosch camera model and lens assembly against the housing opening and mount pattern before ordering — Bosch dome geometry varies across product lines. The adapter supports standard ceiling and wall mounting typical of commercial interior dome installations. Verify electrical connector compatibility and any required firmware updates with your system integrator or the ACTi pre-sales engineering team if you are uncertain about your exact Bosch camera variant.

Installation Notes

Mount this housing to ceiling or wall using standard fasteners appropriate to your substrate (drywall anchors, concrete anchors, or direct fixture to metal framing). Ensure adequate clearance around the dome perimeter for thermal circulation — interior domes generate minor heat during extended operation. Cable routing should follow local electrical code. Do not overtighten the camera mounting ring; hand-tight plus a quarter turn is sufficient. Confirm all electrical connections are rated for the camera's draw before applying power.