Panduit EV10-14FB-Q Fork Terminal 12-10 AWG 1/4" Stud 25pk

Panduit EV10-14FB-Q StrongHold™ Insulated Fork Terminal

The Panduit EV10-14FB-Q delivers field-proven fork terminal performance for commercial electrical installations where reliable wire termination meets code compliance. Built on the StrongHold™ platform, this insulated crimp connector handles 12–10 AWG copper conductors with a 1/4" (M6) stud mount—sized for battery terminals, motor controls, and power distribution blocks commonly found in access control panels, UPS circuits, and surveillance system backbone wiring. Yellow vinyl insulation color-codes for quick gauge identification during commissioning and future service calls. UL 587-H listed and CSA certified for inspector acceptance across North America. Supplied in 25-piece contractor packs for installation-sized quantities.

Key Features

• Fork design allows connection without removing mounting screw—speeds retrofit panel upgrades and hot-add circuits
• 12–10 AWG wire range handles 3.3–5.3mm² conductors in security, telecom, and datacenter power applications
• 1/4" stud bore fits M6 threaded posts on terminal blocks, contactors, distribution bars, and grounding lugs
• Tin-plated copper barrel resists corrosion in climate-controlled equipment rooms and outdoor enclosures
• Yellow vinyl insulation meets UL 587-H flammability spec and provides strain relief at crimp interface
• UL E52164 / CSA LR31216 certification satisfies NEC Article 110.3(B) listing requirements for AHJ approval
• Compatible with Panduit CT-series ratcheting crimpers (CT-100A, CT-1550, CT-2500) for installer toolchain consistency

The barrel crimp zone measures 0.49" wide × 1.14" overall length, engineered for Panduit's hex crimp dies that create six-point compression across the conductor bundle. Tin-plated copper construction maintains sub-5 milliohm contact resistance while preventing galvanic corrosion when paired with brass or plated steel hardware—critical for low-voltage DC circuits powering cameras, card readers, and electric strikes where voltage drop degrades performance. The vinyl insulation extends past the barrel crimp to shield exposed conductor from accidental shorts in crowded junction boxes. Fork tongue thickness supports 15-pound pull force after proper crimp, exceeding typical wire termination stress in stationary equipment installations. Color-coded yellow per industry convention signals 12–10 AWG at a glance during troubleshooting or adds/moves/changes, reducing mis-termination errors during multi-gauge panel builds.

Integrators spec these terminals for access control panel power feeds, surveillance NVR AC input wiring, PoE switch ground bonds, UPS battery interconnects, and electric strike common bus bars—anywhere screw terminals anchor conductors in semi-permanent assemblies. The fork geometry shines in retrofit scenarios: slide the terminal onto an existing stud, tighten the nut, and complete the connection without disassembling adjacent circuits or de-energizing parallel loads. Pack quantity of 25 matches typical job-box needs for panel builds and service truck stock without forcing purchase of 250-piece industrial reels. Competitor cross-references TV1014FL and TV10-14F-XV help during bid substitutions or when spec sheets call out alternate manufacturers. Pair with Panduit CT-1550 or CT-2500 ratchet crimpers for controlled, repeatable compression that passes pull-tests and satisfies authority having jurisdiction inspection on first visit.

Compliance and field efficiency converge in the StrongHold™ spec: UL 587-H flammability rating meets NEC 110.3(B) and NFPA 70 requirements for listed wire connectors, while CSA LR31216 certification clears Canadian Electrical Code inspections in cross-border datacenter and enterprise campus projects. The vinyl compound resists plasticizer migration—no brittle insulation cracking after five years in 40°C equipment rooms or condensation exposure in telecom closets. Panduit's dimensional consistency ensures every terminal in the 25-pack crimps identically with factory-calibrated dies, eliminating field rework from under-crimped pull failures or over-crimped conductor damage. For integrators managing tool inventory across installation crews, compatibility with the entire CT-series crimper family (including legacy CT-100A and current CT-2500 models) protects training investment and consolidates parts stocking to a single terminal line.