Panduit Insulated Vinyl Blade TERMINALPK25MOQ10

Panduit EDV10-11MB-Q Insulated Vinyl Blade Disconnect Terminal

Overview

The Panduit EDV10-11MB-Q is a StrongHold™ vinyl-insulated blade disconnect terminal designed for 12 to 10 AWG wire termination. At 0.91 inches overall length and 0.39 inches (10 mm) wide, this compact terminal delivers a reliable, vibration-resistant connection point in panel wiring, control enclosures, and field device hookups where clean, protected terminations matter. The tin-plated (verzinkt) copper barrel resists corrosion in environments where moisture, cleaning agents, or condensation are present — a real-world concern in any mechanical room or industrial enclosure. Meeting both cULus (E78522) standards, the EDV10-11MB-Q carries the listing recognition that panel builders and inspectors expect on finished assemblies.

Panduit's StrongHold wire termination line is a staple in structured wiring and control panel builds precisely because the quality is consistent across high-volume runs. These are packaged 25 per bag, with a full carton quantity of 10,000 — so whether you're stocking for a single large panel build or maintaining a bin supply for ongoing termination work, the pack sizes are practical.

Key Features

• 10–12 AWG Compatibility: Accepts the wire gauges most common in 20A branch circuits, control wiring, and security device power drops — one terminal covers the range without sorting multiple SKUs.
• Vinyl Insulation: The insulated sleeve keeps adjacent conductors from contacting the barrel after termination, reducing the risk of shorts in tight terminal blocks and crowded junction boxes. Critical in any enclosure where wires are dressed close together.
• Tin-Plated (Verzinkt) Finish: Tin plating resists oxidation at the connection interface, maintaining low contact resistance over time. In humid or outdoor-adjacent enclosures, bare copper terminals can oxidize and increase resistance — the tin finish on the EDV10-11MB-Q mitigates that degradation.
• cULus Listed — E78522: UL listing under file E78522 means the terminal has been evaluated to UL 486A-486B (wire connector standard). For inspected panel builds in the US and Canada, this listing keeps the job compliant without substitutions or variances.
• 0.91-Inch Overall Length / 10 mm Tab Width: Compact footprint fits standard blade-disconnect housings and receptacles without clearance issues. The 10 mm width is a common industry standard for this wire gauge class, compatible with mating receptacles designed to that specification.
• KST2000A Crimp Tool Compatible: Rated for use with the KST2000A crimper (sourced separately — not available from Panduit directly). Specifying the correct crimp tool matters: an undersized or mismatched tool can produce a cold crimp that passes visual inspection but fails under vibration or load cycling.
• Package Quantity of 25 / Carton of 10,000: The 25-piece pack is practical for job-site use — enough for a panel run without the waste of a full carton. The 10,000-count carton is the right buy for shops running continuous assembly where per-unit cost and bin replenishment cycle matter.

Integration & Compatibility

The EDV10-11MB-Q (often searched as EDV10 11MB Q) is a wire termination disconnect terminal intended for use with matching blade receptacles and housings that accept 10 mm blade tabs. The tin-plated blade interfaces with female disconnect receptacles in the standard 0.250-inch quick-disconnect family used widely across HVAC controls, security panel power distribution, fire alarm auxiliaries, and industrial I/O wiring. Confirm that your mating receptacle accepts a 10 mm blade width and is rated for 10–12 AWG before specifying this terminal in high-volume assemblies. The listed crimp tool is the KST2000A — verify your shop's crimper matches before running production quantities. Using an unspecified tool voids the UL listing compliance of the finished assembly.

For panel builders sourcing a complete terminal and connector suite, the StrongHold line includes a broad range of ring, fork, and disconnect styles across multiple AWG ranges — pairing complementary terminals from the same family simplifies procurement and keeps UL listing consistency across the full assembly.

What's in the Box

• 25x Panduit EDV10-11MB-Q StrongHold vinyl-insulated blade disconnect terminals (per package)

Frequently Asked Questions

Q: What wire gauge range does the EDV10-11MB-Q accept?

A: The EDV10-11MB-Q is rated for 12 to 10 AWG wire — the two gauges most commonly used in 20A control circuits and device power wiring.

Q: What crimp tool is specified for the EDV10-11MB-Q?

A: Panduit specifies the KST2000A crimper for this terminal. Note that the KST2000A is not available directly from Panduit — source it separately. Using a non-specified tool can compromise crimp integrity and UL listing compliance of the finished assembly.

Q: Is the EDV10-11MB-Q UL listed?

A: Yes. It meets cULus standards under file E78522, covering both US and Canadian UL listing requirements for wire connectors.

Q: How many terminals come per package and per carton?

A: Each package contains 25 terminals. The full carton quantity is 10,000 pieces — suitable for high-volume panel assembly operations.

Q: What is the tab width of the EDV10-11MB-Q blade?

A: The blade is 10 mm (0.39 inches) wide — a common industry standard width for this AWG class, compatible with standard female quick-disconnect receptacles designed for 10 mm blade tabs.

Q: What finish does the EDV10-11MB-Q use, and why does it matter?

A: The terminal uses a tin-plated (verzinkt) finish. Tin plating resists oxidation at the contact interface, maintaining stable low contact resistance over time — particularly relevant in humid or outdoor-adjacent enclosures where bare copper terminals would degrade faster.

James Everett

The EDV10-11MB-Q is the kind of terminal that shows up in the bill of materials without much discussion — but specifying it wrong costs time on the bench. At 10 mm blade width and rated 10–12 AWG, this StrongHold disconnect fits the sweet spot for control wiring and device power drops in commercial and light industrial panels. The tin-plated finish is the detail I'd call out specifically: in mechanical rooms or enclosures near HVAC equipment, the oxidation resistance keeps contact resistance predictable over the life of the installation, not just at commissioning.

Technical Highlights:

• cULus E78522 Listing: Evaluated to UL 486A-486B — the listing inspectors want to see on completed panel assemblies in the US and Canada. No variance requests, no field engineer callbacks.
• 10 mm / 0.39-Inch Blade Width: Matches the industry-standard 0.250-inch quick-disconnect family. At 0.91 inches overall length, it fits standard blade housings without clearance conflicts in dressed panels.
• Vinyl Insulation: Keeps the barrel isolated post-crimp in tight terminal blocks — reduces the risk of incidental shorts during wiring dress and future maintenance access when the panel is live.

Deployment Considerations:

• The specified crimp tool is the KST2000A — it's not available from Panduit directly, so source it before production. Running these with a mismatched crimper produces a cold crimp that passes visual but fails under load cycling or vibration, which voids the UL compliance of the assembly.
• The package quantity is 25 — practical for single panel builds. If you're running continuous assembly, the 10,000-count carton is the correct buy; per-unit cost drops significantly and bin replenishment becomes a quarterly rather than weekly task.

This terminal is the right specification for commercial security and access control panel builds — HVAC control rooms, ACS power distribution, fire alarm auxiliary wiring — anywhere you need a cULus-listed 10–12 AWG insulated disconnect that won't introduce resistance drift in a humid mechanical environment.