Zebra 800082-076 Holographic ID Card Top Laminate
Overview
The Zebra 800082-076 is a 1.0 mil holographic top laminate cartridge designed specifically for the ZXP Series 8 and ZXP Series 9 card printers. Each cartridge yields 625 prints and applies a Safe Globe holographic overlay — a visual security feature that is readily apparent to inspectors and difficult to replicate without specialized equipment. If your ID card program requires a credential that stands up to counterfeiting scrutiny, this laminate addresses that requirement directly without adding a separate lamination step or secondary process.
Holographic lamination at 1.0 mil is a deliberate balance point: thick enough to provide meaningful physical protection against surface abrasion and wear, thin enough to preserve card flexibility and compatibility with downstream encoding or access control readers that need consistent card geometry. For high-volume programs running the ZXP Series 8 or ZXP Series 9, the 800082-076 (often searched as 800082 076) integrates as a native consumable — no third-party sourcing workarounds needed.
Key Features
- 625 Prints Per Cartridge: A full cartridge delivers 625 laminated cards, which translates to meaningful run length between changeovers in high-throughput badging operations. For an organization issuing several hundred cards per event or per enrollment cycle, a single cartridge can cover an entire run without interruption.
- 1.0 Mil Laminate Thickness: At 1.0 mil, this overlay adds a durable protective layer over the printed card surface, shielding dye-sublimation print panels from UV exposure, moisture, and daily handling wear. Thinner laminates can peel or delaminate prematurely in cards carried in wallets or clipped to lanyards — 1.0 mil provides a more defensible service life.
- Holographic Overlay — Safe Globe Design: The Safe Globe holographic pattern shifts appearance under different viewing angles, creating an overt visual authentication element. Security officers and reception staff can verify card authenticity without any reader or scanner — a meaningful deterrent against simple reprinted counterfeits.
- Dedicated ZXP Series 8 and ZXP Series 9 Compatibility: This laminate cartridge is engineered exclusively for the ZXP Series 8 and ZXP Series 9 platforms. Using the correct native consumable ensures the printer's lamination module applies the overlay at the calibrated temperature and speed profile — deviating to third-party laminates of uncertain spec can cause adhesion failures or printer errors that halt production.
- Holographic Lamination Type: Unlike clear or matte overlay laminates that provide only physical protection, the holographic construction provides both protection and overt security in a single pass. This matters in environments where credential authenticity needs to be verifiable at a glance — government-issued visitor badges, healthcare facility access cards, campus credentials.
Integration and Compatibility
The 800082-076 is compatible with the Zebra ZXP Series 8 and ZXP Series 9 card printers. These platforms support dual-sided printing and inline lamination, meaning the laminate is applied automatically as part of the card production cycle — no manual post-process step. If your current printer is a ZXP Series 3, ZXP Series 7, or any other model outside the Series 8/9 lineup, this cartridge is not the correct consumable. Verify your printer model before ordering. For ID card printers in the Zebra ZXP family, using matched consumables is the only way to maintain the printer manufacturer's performance specifications and avoid lamination module damage from incompatible film chemistry.
This laminate pairs with Zebra's ID card printer supplies ecosystem including ribbon cartridges and blank PVC card stock. For integrators managing large-scale credentialing programs, stocking laminate alongside ribbon consumables reduces the risk of mid-run stockouts. Consult the Zebra card printer catalog to confirm ribbon compatibility with your specific ZXP Series 8 or ZXP Series 9 configuration. If you are evaluating lamination options across a broader ID card supplies program, understanding laminate thickness and overlay type is a primary decision variable — covered in depth in our ID card printing guide.
Frequently Asked Questions
Q: Which printers is the Zebra 800082-076 compatible with?
A: The 800082-076 is compatible exclusively with the Zebra ZXP Series 8 and ZXP Series 9 card printers. It is not designed for use with other ZXP models such as the Series 3 or Series 7.
Q: How many cards does one 800082-076 cartridge laminate?
A: Each cartridge yields 625 prints, meaning it will laminate 625 cards before requiring replacement.
Q: What does the Safe Globe holographic design look like, and why does it matter for security?
A: The Safe Globe design is a holographic pattern that shifts visually when the card is tilted under light. This makes the overlay an overt security feature — visible to any inspector without equipment — that is difficult to reproduce with standard printing methods.
Q: What is the laminate thickness of the 800082-076?
A: The 800082-076 is a 1.0 mil laminate. This thickness provides a durable protective surface layer over the printed card while maintaining card flexibility and compatibility with standard access control readers.
Q: Can I use the 800082-076 on single-sided cards or is it dual-sided only?
A: The laminate applies to the card surface as part of the ZXP Series 8 and ZXP Series 9 inline lamination process. Whether your cards are single or dual-sided printed, the laminate overlay is applied as a top coat. Confirm your printer's lamination module configuration for single versus dual lamination passes.
Q: Is the 800082-076 a clear or holographic laminate?
A: It is holographic — not a clear overlay. The holographic Safe Globe pattern is visible on the finished card and serves as an overt counterfeit deterrent alongside the physical protective function.
The 800082-076 comes up whenever a program needs more than just a printed card — the 1.0 mil holographic overlay is a deliberate credential security decision, not just a lamination spec. At 625 prints per cartridge, this consumable fits naturally into mid-to-high-volume ZXP Series 8 and ZXP Series 9 deployments where you want the security layer applied inline rather than as a separate step.
Technical Highlights:
- 625-Print Yield: Enough to cover a substantial enrollment batch — a 500-person facility could run a full credential replacement cycle on a single cartridge with prints to spare.
- 1.0 Mil Thickness: This is the practical sweet spot for cards that see daily wallet or lanyard use. Thinner overlays can delaminate at card edges within months; 1.0 mil holds up through normal credential service life.
- Safe Globe Holographic Design: The pattern shift under light is an overt authentication signal — training front-desk staff to check for it takes about 30 seconds. That's a meaningful deterrent against reprinted counterfeit badges that would pass a visual check of a plain-card program.
Deployment Considerations:
- Verify your printer model is specifically a ZXP Series 8 or ZXP Series 9 before ordering — this cartridge will not seat in other ZXP series models, and mixing up laminate SKUs mid-program is a preventable delay.
- Holographic laminates can affect contactless smart card read range marginally depending on antenna placement and reader sensitivity — test with your specific card stock and reader combination before deploying at scale if contactless encoding is part of your credential spec.
This laminate is the right call for healthcare, education, and government visitor management programs where credential authenticity needs to be verifiable at a glance by non-technical staff, and where the ZXP Series 8 or ZXP Series 9 is already the production platform.
