i-PRO

i-PRO · MC-MTK15

i-PRO Reader: MTK15 Multi-technology Reader Wall - MC-MTK15

When you're deploying access control in mixed-credential environments or need future-proofing against evolving card technologies, forcing a

• Reads 13.56 MHz iCLASS SE/Multiclass and 125 kHz Prox from one wall-mount unit.
• Wiegand, RS-485, and OSDP outputs integrate with virtually any access control panel.
• NDAA-compliant hardware operates across -30°C to +65°C for demanding deployments.

i-PRO · MC-150/250-3D8P2

i-PRO Powersupply: - MC-150/250-3D8P2

When deploying i-PRO PTZ cameras or multi-sensor systems in locations where PoE++ budget falls short or midspan injectors create cable management

• Multi-output power supply for i-PRO cameras
• Selectable 12V DC / 24V AC output at 10A / 250W
• Powers PTZ and fixed cameras exceeding PoE budget

i-PRO · MC-9951

i-PRO Credintial: 9951 Proximity AND Schlage Smart - MC-9951

When your access control deployment requires dual compatibility across both proximity and Schlage smart card ecosystems, credential standardization

• Dual 125 kHz proximity and Schlage smart technology in one ISO card reduces per-user credentials.
• Compatible with Schlage AD-400, NDE, and HID readers, supporting mixed-technology deployments.
• NDAA compliant credential simplifies phased migration without replacing existing reader infrastructure.

i-PRO · MC-150-B100C82D8-2

i-PRO Powersupply: - MC-150-B100C82D8-2

LifeSafety Power-branded access-control power supply sourced through i-PRO for integration with the broader i-PRO/Panasonic security ecosystem

• Selectable 12 VDC / 24 VDC output supports mixed lock and reader hardware in one enclosure.
• Individually fused output channels isolate faults per device, preventing cascade failures.
• Form-C AC-fail and tamper relays feed status directly to your access control panel.

i-PRO · MC-921-PTNN

i-PRO Reader: Black Wall Switch HID Multiclass - MC-921-PTNN

Wall-switch-form-factor multiclass reader finished in black, designed for visually clean access-control installations

• Reads iClass SE, iClass legacy, and 125 kHz Prox cards from a single reader.
• Wiegand output integrates with virtually any existing access-control panel.
• Wall-switch form factor fits standard single-gang boxes for flush, low-profile installs.

i-PRO · L-HDD-20TB

i-PRO L-HDD-20TB 20TB Hard Drive

20TB hard drive engineered for continuous-duty operation in professional surveillance recording systems and network video recorders

• 20TB single-drive capacity supports 30–90 days of 1080p retention on 8–16 camera systems.
• Operates -58°F to +140°F with NEMA TS2 rating for unheated rooms and industrial enclosures.
• 3.5" rack-mount form factor integrates directly into i-PRO NVR appliances—no adapter needed.

i-PRO · MC-6005-BKB

i-PRO Reader: Black Mini Mullion HID 125KHZ - MC-6005-BKB

• Reads HID 125kHz proximity cards, preserving existing credential infrastructure.
• Mini mullion form factor fits narrow jambs, glass doors, and aluminum storefronts.
• Wiegand output integrates directly with standard access control panels.

i-PRO · IPS-SRV-UDE-120TB

I-pro UDE Hybrid Server/storagefor T2-T3 - IPS-SRV-UDE-120TB

UDE (Unified Data Environment) hybrid server-and-storage appliance pre-configured with 120 TB of recording capacity

• 120 TB hybrid storage consolidates VMS, body-worn, and in-car workloads on one chassis.
• Single-platform audit logging simplifies chain-of-custody handoff and reduces hardening scope.
• STIG-vetted baseline and hardware-accelerated H.265 decoding suit T2/T3 agency deployments.

i-PRO · MC-20NKS

I-Pro Mc-20NKS Reader: HID Multi Class Signo Reader W/Bluetooth

• Reads HID Prox, iCLASS SE/SR, and Seos from one head — no dual-reader installs.
• Integrated BLE enables smartphone-based mobile credentials without hardware changes.
• Standard Wiegand output integrates directly with existing access panels and controllers.

i-PRO · IPS-ICV-UNINSTALL

I-Pro One Day Of Uninstalling Vehicle Or - Ips-Icv-Uninstall

When decommissioning fleet vehicles or reconfiguring mobile surveillance deployments, properly removing i-PRO in-car video systems requires

• Full-day technician removes cameras, DVRs, cabling, and mounts without vehicle damage.
• Covers i-PRO Arbitrator, VITRAN, and Investigator systems including CAN bus disconnection.
• Equipment is inventoried and documented for redeployment; residual media handled securely.

i-PRO · MC-150/250-2C83D-1

i-PRO Powersupply: - MC-150/250-2C83D-1

When deploying i-PRO camera systems across multiple zones or buildings, inconsistent power infrastructure becomes a liability

• Delivers 250W at 12V DC or 24V AC selectable, supporting diverse i-PRO camera loads.
• 10A output with overcurrent and short-circuit protection prevents cascade failures across camera strings.
• NDAA-compliant, rated -20°C to +49°C for reliable operation in demanding cabinet environments.

i-PRO · IPS-CLR-SYNC-1M

i-PRO Automatically Generate Cases IN - IPS-CLR-SYNC-1M

1-meter synchronization cable designed to enable automatic case generation functionality in i-PRO surveillance deployments

• 1 m length fits standard rack-to-module runs in surveillance closets.
• Enables hardware-level sync for automated case generation without manual VMS input.
• Direct replacement component for i-PRO systems with dedicated sync connector interfaces.

i-PRO · MC-150-B1002D8PM-1

i-PRO Powersupply: - MC-150-B1002D8PM-1

When you're deploying i-PRO camera systems, power delivery consistency matters as much as the glass you specify

• Eight fused 12V DC / 24V AC outputs deliver 150W total for mixed camera loads.
• Regulated 6A output prevents reboots and firmware corruption during 24/7 operation.
• NDAA-compliant enclosed cabinet rated to -20°C–+49°C suits harsh deployment sites.

i-PRO · IPS-SVR-PWRCORD-EU

I-pro AC Server Power Cord 8FT FOR Europe. - IPS-SVR-PWRCORD-EU

Factory-spec 8-foot European AC power cord for i-PRO server and NVR appliances

• CEE 7/7 Schuko plug mates directly to 230 V continental European mains outlets.
• IEC 60320 C13 connector matches i-PRO server and NVR appliance PSU inlets exactly.
• HAR-rated insulation and CE markings satisfy EU regulatory inspection requirements.

i-PRO · WV-QAT500-W

i-PRO WV-QAT500-W Attachment Pipe Bracket

Versatile attachment pipe bracket designed for secure mounting of compatible i-PRO surveillance cameras

• Supports ceiling, pendant, and rack mount types for flexible deployment.
• Designed specifically for i-PRO camera systems ensuring confirmed compatibility.
• Single bracket accommodates multiple configurations, reducing accessory SKU count.

i-PRO · IPS-SRV-RED-R5-PRO

I-pro Redaction Rack Server FOR UP TO 5 - IPS-SRV-RED-R5-PRO

When you need to comply with privacy regulations while maintaining investigative capability, manual redaction of surveillance footage becomes a

• Automates face, plate, and area redaction across up to 5 camera channels.
• Rack-mounted appliance offloads CPU-intensive redaction from VMS workstations.
• Processes footage locally — no cloud dependency, preserving chain of custody.

i-PRO · WV-CW634F

i-PRO WV-CW634F Super Dynamic 6 Vandal-Resistant Fixed Camera

N IP66-rated vandal-resistant dome built for high-security indoor and transitional spaces where physical tampering and spray-down cleaning are routine

• 700 TVL resolution with Super Dynamic 6 delivers usable detail in mixed lighting.
• IP66-rated dome withstands spray-down cleaning and physical tampering in harsh sites.
• Varifocal 3.8–8.0 mm CS-mount lens allows focal adjustment on-site without hardware swaps.

i-PRO · ARB-BWCBLANT-BLM

i-PRO LOW Profile Blade Type Antenna. - ARB-BWCBLANT-BLM

Low-profile blade-type antenna designed for wireless surveillance deployments where antenna height and visibility must be minimized

• Blade form factor minimizes visual profile on walls, poles, and masts.
• Low-profile design reduces wind loading versus traditional whip or dipole antennas.
• Engineered for i-PRO wireless camera systems requiring external antenna connectivity.

i-PRO · WJND400/36000T4

i-PRO WJND400/36000T4 64-Channel H.264 NVR

Professional-grade 64-channel network video recorder engineered for large-scale surveillance deployments requiring high-capacity storage and

• Stores 36TB of H.264 video across 64 channels for extended retention in large deployments.
• Bandwidth control spans 32 Kbps to 10 Mbps plus unlimited, letting admins tune network load precisely.
• Emergency recording and power outage detection inputs support failsafe automation integration.

i-PRO · IPS-ICV-ANT-900WM

i-PRO Antenna FOR 900 MHZ Wireless MIC Dock - IPS-ICV-ANT-900WM

• 900 MHz band resists congestion and penetrates vehicle structures better than 2.4 GHz.
• Omni-directional pattern delivers predictable RF coverage around the patrol vehicle.
• Standard SMA connector enables direct dock installation with no adapter hardware required.